K75 / K100 / K1 / K1100
Library entry covers 1983-1999
Published source
BMW Motorrad Maintenance schedule K75/K1/K100 (form UX-VS-2, 07.2001)
Factory factory bulletin. Covers K75/K1/K100/K100RT/LT to 1993, K100RS 2V/4V to 1993.
Open the source64 items for a 1983 model, grouped by interval the way a factory chart is laid out.
How this bike is built (what the schedule is based on)
- Engine cycle
- Four-stroke
- Engine lubrication
- Wet sump (oil in crankcase)
- Oil filtration
- Replaceable cartridge or spin-on filter
- Valve gear
- Overhead cam, shim adjusted (incl. desmo)
- Ignition
- Electronic (CDI / transistor / ECU)
- Charging
- Alternator / stator with rectifier
- Battery
- Wet cell (flooded lead-acid, needs topping up)
- Fuel system
- Fuel injection
- Cooling
- Liquid cooled
- Primary drive
- Gear or chain inside engine, shares engine oil
- Gearbox oil
- Separate gearbox oil
- Clutch control
- Hand lever, cable
- Final drive
- Shaft
- Front suspension
- Telescopic fork
- Rear suspension
- Swingarm, single shock / cantilever
- Front brake
- Disc, hydraulic
- Rear brake
- Drum (or band / belt rim)
- Wheels
- Cast / alloy, tubeless
- Sidecar
- No sidecar
1983 BMW K75 / K100 / K1 / K1100
On the road: every 200 mi
1 item-
Check engine oil levelPre-ride / on the roadGuideline
Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.
On the road: every 300 mi
2 items-
Check lights, horn, brake light switchesPre-ride / on the roadGuideline
-
Check tire pressuresPre-ride / on the roadGuideline
On the road: every 500 mi
2 items-
Check coolant levelPre-ride / on the roadGuideline
-
Walk-around: check nuts and bolts for vibration looseningPre-ride / on the roadGuideline
Old machines shake things loose: exhaust nuts, mudguard stays, footrests, tank mounts, battery strap.
On the road: every 1,000 mi
1 item-
Check road kit: plugs, points file, master link, tube patches, wire, tapePre-ride / on the roadGuideline
Every 1,000 mi or 6 months
3 items-
Check gearbox oil levelPrimary and gearboxGuideline
-
Adjust rear drum brake and rod / cable linkageBrakesGuideline
-
Inspect tire tread, sidewalls and date codesWheels and tiresGuideline
Every 2,000 mi or 12 months
2 items-
Inspect, clean and gap spark plugsEngineGuideline
-
Grease swingarm pivotRear suspension and frameGuideline
Every 3,000 mi or 12 months
6 items-
Clean / inspect air filterFuel and airGuideline
Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
-
Adjust clutch pushrod / clutch adjusterPrimary and gearboxGuideline
-
Check steering damper (friction or hydraulic)Front endGuideline
-
Inspect fork seals, stanchions and fork bootsFront endGuideline
-
Check footrests, pegs, rear brake and gear lever pivotsRear suspension and frameGuideline
-
Check wheel bearings for playWheels and tiresGuideline
Every 4,000 mi or 12 months
1 item-
Lubricate brake cam spindles, check linings and drumsBrakesGuideline
Every 4,500 mi or 6 months
2 items-
Change engine oilEngineFactory
Manual: Change oil, renew oil filter element. Factory: Every 7,500 km service; short trips/below 0C: 3 months, 3,000 km. Form p.1
-
Replace oil filterEngineFactory
Manual: Renew oil filter element. Factory: With every oil change. Form p.1
Every 4,500 mi
3 items-
Inspect wiring, bullet connectors and ground pointsIgnition and electricsFactory
Manual: Final inspection: lights, signals, warning lights. Factory: Every service column. Form p.1
-
Grease and check center / side stand and springsRear suspension and frameFactory
Manual: Grease side/center stand pivots. Factory: 7,500 and 15,000 km columns. Form p.1
-
Lubricate control cables and lever pivotsControls and cablesFactory
Manual: Grease clutch cable nipples. Factory: 7,500 and 15,000 km columns. Form p.1
Every 6,000 mi or 12 months
5 items-
Check charging voltage and regulator / cut-outIgnition and electricsGuideline
-
Check final drive for leaks and bearing playFinal driveGuideline
-
Check swingarm bushes for playRear suspension and frameGuideline
-
Inspect rear shocks for leaks and dampingRear suspension and frameGuideline
-
Lubricate speedometer / tachometer cables, check driveControls and cablesGuideline
A dry speedo cable whips the needle and eventually kills the instrument.
Every 6,000 mi or 2 years
1 item-
Check engine breather and oil returnEngineGuideline
Every 9,000 mi or 12 months
4 items-
Clean battery terminals, check charge and strapIgnition and electricsFactory
Manual: Clean and grease battery posts. Factory: 15,000 km and annual. Form p.1
-
Change gearbox oilPrimary and gearboxFactory
Manual: Change oil in gearbox. Factory: 15,000 km inspection; at least once a year. Form p.1
-
Change final drive (rear drive) oilFinal driveFactory
Manual: Change oil in final drive. Factory: 15,000 km inspection; at least once a year. Form p.1
-
Change fork oilFront endFactory
Manual: Change oil in telescopic fork. Factory: 15,000 km inspection; at least once a year. Form p.1
Every 9,000 mi
11 items-
Check engine mounting bolts and platesEngineFactory
Manual: Take up slack: power unit to frame, strut mounts, studs. Factory: Form p.1
-
Check valve clearances (shim adjusted)EngineFactory
Manual: Check valve clearances. Factory: 15,000 km box marked not standard; K75 also at 1,000 km. Form p.1
-
Inspect coolant hoses and clampsEngineFactory
Manual: Check hose clips on fuel and cooling system. Factory: Also coolant level. Form p.1
-
Replace spark plugsEngineFactory
Manual: Renew spark plugs. Factory: Form p.1
-
Check throttle cable(s) free play and returnFuel and airFactory
Manual: Check throttle and choke cable free travel. Factory: Form p.1
-
Replace air filter elementFuel and airFactory
Manual: Renew intake air cleaner element. Factory: Marked not standard; dusty conditions every 10,000 km. Form p.1
-
Adjust clutch free play, lubricate cable and lever pivotPrimary and gearboxFactory
Manual: Check clutch operating clearance. Factory: Form p.1
-
Check steering head bearing adjustmentFront endFactory
Manual: Check steering head bearing play. Factory: Form p.1
-
Check brake pads and discsBrakesFactory
Manual: Check brake pads and discs for wear. Factory: ABS models also every 7,500 km. Form p.1
-
Inspect brake hoses; replace old rubberBrakesFactory
Manual: Check brake connections and lines. Factory: Also fluid level. Form p.1
-
Rebuild calipers and master cylinders (seals)BrakesFactory
Manual: Check brake calipers operation/leaks. Factory: Repair/renew if necessary. Form p.1
Every 10,000 mi or 2 years
1 item-
Compression test (or leak-down)EngineGuideline
Every 12,000 mi or 2 years
2 items-
Synchronize throttle bodiesFuel and airGuideline
-
Clean and grease rear suspension linkageRear suspension and frameGuideline
Every 15,000 mi or 5 years
1 item-
Inspect clutch plates and springsPrimary and gearboxGuideline
Every 15,000 mi
1 item-
Replace brake linings / skim drums (wear based)BrakesGuideline
Every 18,000 mi
1 item-
Repack / replace steering head bearingsFront endFactory
Manual: Grease twistgrip and steering head bearings. Factory: Severe operating conditions recommendation. Form p.1
Every 20,000 mi or 4 years
2 items-
Lubricate drive shaft splines / check U-jointFinal driveGuideline
-
Repack / replace wheel bearingsWheels and tiresGuideline
Cup-and-cone and taper roller hubs need periodic repacking and adjustment.
Every 24,000 mi
1 item-
Replace fuel filterFuel and airFactory
Manual: Renew fuel filter element. Factory: Poor-quality fuel: every 20,000 km. Form p.1
Every 25,000 mi or 6 years
1 item-
Replace swingarm bushes / bearingsRear suspension and frameGuideline
Every 30,000 mi or 6 years
1 item-
Rebuild forks: seals, bushes, springsFront endGuideline
Every 36,000 mi
1 item-
Renew lining on chain tensioner railFinal driveFactory
Factory: All K models. Form p.1
Every 3 months
1 item-
Check battery electrolyte, top up with distilled waterIgnition and electricsFactory
Manual: Check battery acid level. Factory: At least every 3 months. Form p.1
Every 12 months
2 items-
Replace brake fluidBrakesFactory
Manual: Renew brake fluid. Factory: At least once a year. Form p.1
-
Check speedometer / odometer against a known distanceControls and cablesGuideline
Old speedos drift with tire size and drive wear. Use phone GPS over a measured 10 miles / km.
Every 2 years
3 items-
Replace coolantEngineFactory
Manual: Renew coolant. Factory: At least every 2 years, annual service column. Form p.1
-
Inspect fuel tank for rust, sealer failure, leaksFuel and airGuideline
-
Inspect frame, welds and lugs for cracksRear suspension and frameGuideline
Every 4 years
1 item-
Replace fuel linesFuel and airGuideline
Old rubber and modern ethanol fuel do not mix well.
Every 6 years
1 item-
Replace tires on age (regardless of tread)Wheels and tiresGuideline
Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.
Keep up with this schedule on your phone
Add the bike in the app and this chart loads itself, ready to log against and edit.


