MotoService Log
Indian Chief / Chieftain / Roadmaster (Thunderstroke)
Example photo: Cjp24, CC BY-SA 4.0, Wikimedia Commons
Indian · Indian Thunderstroke / PowerPlus cruisers (2014-)

Chief / Chieftain / Roadmaster (Thunderstroke)

Library entry covers 2014-2026

19 factory 26 guideline

Published source

2022 Indian Chief Rider's Manual P/N 9939939, Maintenance Intervals 7.7.6 (Polaris publications)

Factory owner's handbook. Covers 2022 (Chief, 116 Thunderstroke).

Open the source

45 items for a 2014 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)
Engine cycle
Four-stroke
Engine lubrication
Wet sump (oil in crankcase)
Oil filtration
Replaceable cartridge or spin-on filter
Valve gear
Hydraulic lifters (no routine clearance adjustment)
Ignition
Electronic (CDI / transistor / ECU)
Charging
Alternator / stator with rectifier
Battery
Wet cell (flooded lead-acid, needs topping up)
Fuel system
Fuel injection
Cooling
Air / oil cooled
Primary drive
Gear or chain inside engine, shares engine oil
Gearbox oil
Shares engine oil
Clutch control
Hand lever, cable
Final drive
Toothed belt
Front suspension
Telescopic fork
Rear suspension
Swingarm, twin shocks
Front brake
Disc, hydraulic
Rear brake
Disc, hydraulic
Wheels
Cast / alloy, tubeless
Sidecar
No sidecar
Maintenance schedule

2014 Indian Chief / Chieftain / Roadmaster (Thunderstroke)

On the road: every 200 mi

1 item
  • Check engine oil level
    Pre-ride / on the road
    Guideline

    Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 300 mi

2 items
  • Check lights, horn, brake light switches
    Pre-ride / on the road
    Guideline
  • Check tire pressures
    Pre-ride / on the road
    Guideline

Every 3,000 mi or 12 months

5 items
  • Check throttle cable(s) free play and return
    Fuel and air
    Guideline
  • Inspect fork seals, stanchions and fork boots
    Front end
    Guideline
  • Check footrests, pegs, rear brake and gear lever pivots
    Rear suspension and frame
    Guideline
  • Grease and check center / side stand and springs
    Rear suspension and frame
    Guideline
  • Check wheel bearings for play
    Wheels and tires
    Guideline

Every 5,000 mi or 12 months

2 items
  • Change engine oil
    Engine
    Factory

    Manual: Engine oil and filter change. Factory: 500 mi then every 5000 mi; annually per Indian KA-01079

  • Replace oil filter
    Engine
    Factory

    Manual: Engine oil and filter change. Factory: with oil change

Every 5,000 mi

9 items
  • Check engine breather and oil return
    Engine
    Factory

    Manual: Inspect crankcase ventilation system. Factory: every interval

  • Clean / inspect air filter
    Fuel and air
    Factory

    Manual: Inspect, clean air filter. Factory: inspect/clean at 5k, 20k etc

  • Adjust clutch free play, lubricate cable and lever pivot
    Primary and gearbox
    Factory

    Manual: Inspect clutch cable freeplay. Factory: every interval

  • Inspect drive belt, pulleys and tension
    Final drive
    Factory

    Manual: Inspect drive belt; tighten, clean, adjust. Factory: every interval

  • Check steering head bearing adjustment
    Front end
    Factory

    Manual: Inspect steering bearings. Factory: every interval

  • Check swingarm bushes for play
    Rear suspension and frame
    Factory

    Manual: Inspect swing arm and rear axle. Factory: every interval

  • Clean and grease rear suspension linkage
    Rear suspension and frame
    Factory

    Manual: Inspect rear suspension linkage. Factory: every interval

  • Check brake pads and discs
    Brakes
    Factory

    Manual: Inspect brake pads. Factory: every interval, more often in severe use

  • Inspect tire tread, sidewalls and date codes
    Wheels and tires
    Factory

    Manual: Inspect tires / wheels. Factory: every interval

Every 6,000 mi or 12 months

4 items
  • Check charging voltage and regulator / cut-out
    Ignition and electrics
    Guideline
  • Inspect rear shocks for leaks and damping
    Rear suspension and frame
    Guideline
  • Lubricate control cables and lever pivots
    Controls and cables
    Guideline
  • Lubricate speedometer / tachometer cables, check drive
    Controls and cables
    Guideline

    A dry speedo cable whips the needle and eventually kills the instrument.

Every 10,000 mi or 2 years

1 item
  • Replace brake fluid
    Brakes
    Factory

    Manual: Replace DOT 4 brake fluid. Factory: replace each 10k; 'change every two years'

Every 10,000 mi

3 items
  • Compression test (or leak-down)
    Engine
    Factory

    Manual: Inspect engine compression. Factory: every 10,000 mi

  • Inspect, clean and gap spark plugs
    Engine
    Factory

    Manual: Inspect spark plugs, torque. Factory: every 10,000 mi

  • Replace air filter element
    Fuel and air
    Factory

    Manual: Replace air filter. Factory: replace at 10k and 30k (also 15k in table)

Every 12,000 mi or 2 years

2 items
  • Synchronize throttle bodies
    Fuel and air
    Guideline
  • Grease swingarm pivot
    Rear suspension and frame
    Guideline

Every 15,000 mi or 2 years

1 item
  • Change fork oil
    Front end
    Factory

    Manual: Replace front fork oil. Factory: replace 15k, 30k; 'or every 2 years' noted

Every 20,000 mi or 2 years

1 item
  • Replace key fob battery
    Ignition and electrics
    Factory

    Factory: 20k, 40k or every 2 years

Every 20,000 mi or 4 years

2 items
  • Repack / replace steering head bearings
    Front end
    Guideline

    Many old machines use loose balls in cups and cones. Taper roller conversions are common.

  • Repack / replace wheel bearings
    Wheels and tires
    Guideline

    Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 24,000 mi or 4 years

1 item
  • Replace fuel filter
    Fuel and air
    Guideline

Every 25,000 mi or 6 years

1 item
  • Replace swingarm bushes / bearings
    Rear suspension and frame
    Guideline

Every 30,000 mi or 6 years

1 item
  • Rebuild forks: seals, bushes, springs
    Front end
    Guideline

Every 30,000 mi

2 items
  • Replace spark plugs
    Engine
    Factory

    Factory: replace at 30,000 mi

  • Replace drive belt (wear or damage based)
    Final drive
    Factory

    Manual: Replace drive belt. Factory: replace at 30,000 mi

Every 6 months

1 item
  • Clean battery terminals, check charge and strap
    Ignition and electrics
    Guideline

Every 2 years

2 items
  • Inspect wiring, bullet connectors and ground points
    Ignition and electrics
    Guideline
  • Inspect frame, welds and lugs for cracks
    Rear suspension and frame
    Guideline

Every 4 years

3 items
  • Replace fuel lines
    Fuel and air
    Guideline

    Old rubber and modern ethanol fuel do not mix well.

  • Inspect brake hoses; replace old rubber
    Brakes
    Guideline
  • Rebuild calipers and master cylinders (seals)
    Brakes
    Guideline

Every 6 years

1 item
  • Replace tires on age (regardless of tread)
    Wheels and tires
    Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.

Keep up with this schedule on your phone

Add the bike in the app and this chart loads itself, ready to log against and edit.

Coming soon to Google Play

Other 2014 Indian models

All 2014 Indian