MotoService Log
Yamaha Venture / Royal Star / V-Star
Example photo: S Bumgardner at English Wikipedia, Public domain, Wikimedia Commons
Yamaha · Modern shaft-drive motorcycle (2000-)

Venture / Royal Star / V-Star

Library entry covers 1983-2017

34 factory 30 guideline

Published source

Yamaha Royal Star Venture XVZ1300TF Owner's Manual (metric edition, 2001)

Factory owner's handbook. Covers 2001 (XVZ1300TF Royal Star Venture, metric edition printed Jan 2001).

Open the source

64 items for a 1983 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)
Engine cycle
Four-stroke
Engine lubrication
Wet sump (oil in crankcase)
Oil filtration
Replaceable cartridge or spin-on filter
Valve gear
Overhead cam, screw/locknut adjusters
Ignition
Electronic (CDI / transistor / ECU)
Charging
Alternator / stator with rectifier
Battery
Wet cell (flooded lead-acid, needs topping up)
Fuel system
Two or more carburetors
Cooling
Liquid cooled
Primary drive
Gear or chain inside engine, shares engine oil
Gearbox oil
Shares engine oil
Clutch control
Hand lever, cable
Final drive
Shaft
Front suspension
Telescopic fork
Rear suspension
Swingarm, single shock / cantilever
Front brake
Disc, hydraulic
Rear brake
Disc, hydraulic
Wheels
Cast / alloy, tubeless
Sidecar
No sidecar
Maintenance schedule

1983 Yamaha Venture / Royal Star / V-Star

On the road: every 200 mi

1 item
  • Check engine oil level
    Pre-ride / on the road
    Guideline

    Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 300 mi

1 item
  • Check tire pressures
    Pre-ride / on the road
    Guideline

On the road: every 500 mi

1 item
  • Check coolant level
    Pre-ride / on the road
    Guideline

On the road: every 1,000 mi

1 item
  • Check road kit: plugs, points file, master link, tube patches, wire, tape
    Pre-ride / on the road
    Guideline

On the road: every 6,214 mi or 12 months

2 items
  • Check lights, horn, brake light switches
    Pre-ride / on the road
    Factory

    Manual: Lights, signals and switches: check, adjust headlight beam. Factory: Chart p.7-5: initial 1,000 km, then every 10,000 km and annually

  • Walk-around: check nuts and bolts for vibration loosening
    Pre-ride / on the road
    Factory

    Manual: Chassis fasteners: check tightness. Factory: Chart p.7-4: every 10,000 km and annual check

Every 1,000 mi or 1 month

1 item
  • Check battery electrolyte, top up with distilled water
    Ignition and electrics
    Guideline

    Wet-cell batteries on old machines need regular topping up, more in hot weather.

Every 3,000 mi or 12 months

7 items
  • Check and adjust valve clearances
    Engine
    Guideline
  • Check engine mounting bolts and plates
    Engine
    Guideline
  • Check throttle cable(s) free play and return
    Fuel and air
    Guideline
  • Clean fuel tap filter / sediment bowl
    Fuel and air
    Guideline
  • Adjust clutch pushrod / clutch adjuster
    Primary and gearbox
    Guideline
  • Check steering damper (friction or hydraulic)
    Front end
    Guideline
  • Check footrests, pegs, rear brake and gear lever pivots
    Rear suspension and frame
    Guideline

Every 6,000 mi or 12 months

3 items
  • Clean carburetor float bowl(s), check float level and jets
    Fuel and air
    Guideline

    Ethanol fuel varnishes old carbs quickly in storage.

  • Check charging voltage and regulator / cut-out
    Ignition and electrics
    Guideline
  • Lubricate speedometer / tachometer cables, check drive
    Controls and cables
    Guideline

    A dry speedo cable whips the needle and eventually kills the instrument.

Every 6,000 mi or 2 years

1 item
  • Check engine breather and oil return
    Engine
    Guideline

Every 6,214 mi or 12 months

9 items
  • Change engine oil
    Engine
    Factory

    Manual: Engine oil: change. Factory: Chart p.7-4: initial 1,000 km, then every 10,000 km and annually

  • Inspect coolant hoses and clamps
    Engine
    Factory

    Manual: Cooling system: check coolant level and leakage. Factory: Chart p.7-4: every 10,000 km and annual check

  • Replace fuel lines
    Fuel and air
    Factory

    Manual: Fuel line: check fuel hoses for cracks or damage. Factory: Chart p.7-3: every 10,000 km and annual check

  • Synchronize carburetors
    Fuel and air
    Factory

    Manual: Carburetors: check choke, adjust idle speed and synchronization. Factory: Chart p.7-4: initial 1,000 km, then every 10,000 km and annually

  • Grease and check center / side stand and springs
    Rear suspension and frame
    Factory

    Manual: Sidestand: check operation, lubricate. Factory: Chart p.7-4: every 10,000 km and annual check

  • Sidestand switch: check operation
    Rear suspension and frame
    Factory

    Factory: Chart p.7-4: initial 1,000 km, then every 10,000 km and annually

  • Check brake pads and discs
    Brakes
    Factory

    Manual: Front and rear brake: check operation, fluid level and leakage. Factory: Chart p.7-3: every 10,000 km and annual; pads replaced when worn to limit

  • Front and rear brake switches: check operation
    Brakes
    Factory

    Factory: Chart p.7-5: initial 1,000 km, then every 10,000 km and annually

  • Lubricate control cables and lever pivots
    Controls and cables
    Factory

    Manual: Moving parts and cables: lubricate. Factory: Chart p.7-5: every 10,000 km and annual check

Every 6,214 mi

8 items
  • Adjust clutch free play, lubricate cable and lever pivot
    Primary and gearbox
    Factory

    Manual: Clutch: check operation, fluid level and leakage. Factory: Chart p.7-3: initial 1,000 km, then every 10,000 km

  • Check steering head bearing adjustment
    Front end
    Factory

    Manual: Steering bearings: check play and roughness. Factory: Chart p.7-4: initial 1,000 km, then every 10,000 km

  • Inspect fork seals, stanchions and fork boots
    Front end
    Factory

    Manual: Front fork: check operation and for oil leakage. Factory: Chart p.7-4: every 10,000 km

  • Check swingarm bushes for play
    Rear suspension and frame
    Factory

    Manual: Swingarm: check operation and for excessive play. Factory: Chart p.7-4: every 10,000 km

  • Inspect rear shocks for leaks and damping
    Rear suspension and frame
    Factory

    Manual: Shock absorber assembly: check operation and oil leakage. Factory: Chart p.7-4: every 10,000 km

  • Check spoke tension and wheel true
    Wheels and tires
    Factory

    Manual: Wheels: check runout and for damage. Factory: Chart p.7-4: every 10,000 km

  • Check wheel bearings for play
    Wheels and tires
    Factory

    Manual: Wheel bearings: check for looseness or damage. Factory: Chart p.7-4: every 10,000 km

  • Inspect tire tread, sidewalls and date codes
    Wheels and tires
    Factory

    Manual: Tires: check tread depth, damage, air pressure. Factory: Chart p.7-4: every 10,000 km

Every 10,000 mi or 2 years

2 items
  • Compression test (or leak-down)
    Engine
    Guideline
  • Change fork oil
    Front end
    Guideline

    Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 12,427 mi

9 items
  • Inspect, clean and gap spark plugs
    Engine
    Factory

    Manual: Spark plugs: check condition, clean and regap. Factory: Chart p.7-3: at 10,000 and 30,000 km; replaced at 20,000 and 40,000

  • Replace oil filter
    Engine
    Factory

    Manual: Engine oil filter cartridge: replace. Factory: Chart p.7-4: initial 1,000 km, then every 20,000 km

  • Replace spark plugs
    Engine
    Factory

    Manual: Spark plugs: replace. Factory: Chart p.7-3: every 20,000 km

  • Clean / inspect air filter
    Fuel and air
    Factory

    Manual: Air filter element: clean. Factory: Chart p.7-3: at 10,000 and 30,000 km; replaced at 20,000 and 40,000

  • Replace air filter element
    Fuel and air
    Factory

    Manual: Air filter element: replace. Factory: Chart p.7-3: every 20,000 km

  • Replace fuel filter
    Fuel and air
    Factory

    Manual: Fuel filter: check condition. Factory: Chart p.7-3: every 20,000 km

  • Change final drive (rear drive) oil
    Final drive
    Factory

    Manual: Final gear oil: change. Factory: Chart p.7-5: initial 1,000 km, then every 20,000 km

  • Check final drive for leaks and bearing play
    Final drive
    Factory

    Manual: Final gear oil: check level and leakage. Factory: Chart p.7-5: at 1,000, 10,000 and 30,000 km

  • Clean and grease rear suspension linkage
    Rear suspension and frame
    Factory

    Manual: Rear suspension relay arm and connecting arm pivots: lubricate. Factory: Chart p.7-4: lubricate every 20,000 km; check operation every 10,000 km

Every 15,000 mi or 5 years

1 item
  • Inspect clutch plates and springs
    Primary and gearbox
    Guideline

Every 20,000 mi or 4 years

2 items
  • Lubricate drive shaft splines / check U-joint
    Final drive
    Guideline
  • Repack / replace wheel bearings
    Wheels and tires
    Guideline

    Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 24,855 mi

1 item
  • Check valve clearances (shim adjusted)
    Engine
    Factory

    Manual: Valves: check valve clearance, adjust. Factory: Chart p.7-3: every 40,000 km

Every 25,000 mi or 6 years

1 item
  • Replace swingarm bushes / bearings
    Rear suspension and frame
    Guideline

Every 30,000 mi or 6 years

1 item
  • Rebuild forks: seals, bushes, springs
    Front end
    Guideline

Every 31,069 mi

2 items
  • Repack / replace steering head bearings
    Front end
    Factory

    Manual: Steering bearings: lubricate with lithium-soap-based grease. Factory: Chart p.7-4: every 50,000 km

  • Grease swingarm pivot
    Rear suspension and frame
    Factory

    Manual: Swingarm: lubricate with lithium-soap-based grease. Factory: Chart p.7-4: every 50,000 km

Every 6 months

1 item
  • Clean battery terminals, check charge and strap
    Ignition and electrics
    Guideline

Every 12 months

1 item
  • Check speedometer / odometer against a known distance
    Controls and cables
    Guideline

    Old speedos drift with tire size and drive wear. Use phone GPS over a measured 10 miles / km.

Every 2 years

5 items
  • Inspect fuel tank for rust, sealer failure, leaks
    Fuel and air
    Guideline
  • Inspect wiring, bullet connectors and ground points
    Ignition and electrics
    Guideline
  • Inspect frame, welds and lugs for cracks
    Rear suspension and frame
    Guideline
  • Rebuild calipers and master cylinders (seals)
    Brakes
    Factory

    Manual: Brake and clutch cylinder oil seals: replace. Factory: Note p.7-5: replace master, caliper and clutch release cylinder seals every two years

  • Replace brake fluid
    Brakes
    Guideline

Every 3 years

1 item
  • Replace coolant
    Engine
    Factory

    Manual: Cooling system: change. Factory: Chart p.7-4: every 3 years

Every 4 years

1 item
  • Inspect brake hoses; replace old rubber
    Brakes
    Factory

    Manual: Brake hoses: replace. Factory: Chart p.7-3: check every 10,000 km; replace every 4 years

Every 6 years

1 item
  • Replace tires on age (regardless of tread)
    Wheels and tires
    Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.

Keep up with this schedule on your phone

Add the bike in the app and this chart loads itself, ready to log against and edit.

Coming soon to Google Play

Other 1983 Yamaha models

All 1983 Yamaha