No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

Aprilia · Shim-adjusted overhead-cam four-stroke, wet sump, gearbox shares engine oil, chain drive

RSV4 (1099 cc)

Library entry covers 2009-2025

23 factory 31 guideline

Published source

aprilia RSV4 Factory APRC MY2011 owner's manual ENUS-FR, 6 Scheduled maintenance, Periodic maintenance chart pp.263-265

Factory owner's handbook. Covers RSV4 Factory APRC (999 cc) MY2011 owner's manual (EN-US/FR, 899127); later 1099 cc bikes not covered by this edition.

Open the source

54 items for a 2016 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, shim adjusted (incl. desmo)
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Liquid cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Shares engine oil
Clutch control: Hand lever, cable
Final drive: Chain
Front suspension: Telescopic fork
Rear suspension: Swingarm, single shock / cantilever
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

2016 Aprilia RSV4 (1099 cc)

On the road: every 200 mi

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 300 mi

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

On the road: every 500 mi

1 item

Check coolant level

Pre-ride / on the road

Guideline

On the road: every 600 mi

1 item

Check chain slack and rear wheel alignment

Pre-ride / on the road

Guideline

On the road: every 621 mi

1 item

Lubricate drive chain

Pre-ride / on the road

Factory

Manual: Drive chain. Factory: Check, clean, adjust every 621 mi (1000 km); lubricate

Every 1,000 mi or 6 months

1 item

Inspect tire tread, sidewalls and date codes

Wheels and tires

Guideline

Every 3,000 mi or 12 months

4 items

Check throttle cable(s) free play and return

Fuel and air

Guideline
Clean drive chain thoroughly (remove and soak, re-lube)

Final drive

Guideline

Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline

Every 4,000 mi or 12 months

1 item

Inspect, clean and gap spark plugs

Engine

Guideline

Every 6,000 mi or 12 months

5 items

Inspect coolant hoses and clamps

Engine

Guideline
Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 6,200 mi

10 items

Change engine oil

Engine

Factory

Manual: Motor oil. Factory: R at 0.6 (1), 6.2 (10), 12.4 (20)... mi x1000 (km x1000); 5,000 km racing
Replace oil filter

Engine

Factory

Manual: Motor oil filter. Factory: Every 3107 mi (5000 km) for racing use
Synchronize throttle bodies

Fuel and air

Factory

Manual: Cylinder balancing.
Adjust clutch free play, lubricate cable and lever pivot

Primary and gearbox

Factory

Manual: Clutch cable. Factory: L (lubricate) every column
Inspect chain and sprockets for wear (measure stretch)

Final drive

Factory

Manual: Front and rear sprockets.
Check steering head bearing adjustment

Front end

Factory

Manual: Steering bearings and free play.
Inspect fork seals, stanchions and fork boots

Front end

Factory

Manual: Fork oil seals.
Check brake pads and discs

Brakes

Factory

Manual: Brake pad wear. Factory: Also check after every trip
Check wheel bearings for play

Wheels and tires

Factory

Manual: Wheel bearings.
Lubricate control cables and lever pivots

Controls and cables

Factory

Manual: Transmission and control cables.

Every 10,000 mi or 2 years

1 item

Compression test (or leak-down)

Engine

Guideline

Every 12,000 mi or 2 years

1 item

Grease swingarm pivot

Rear suspension and frame

Guideline

Every 12,400 mi

8 items

Check and adjust valve clearances

Engine

Factory

Manual: Valve free play. Factory: A (adjust) at 20 and 40; every 10,000 km racing
Flexible coupling

Engine

Factory
Replace spark plugs

Engine

Factory

Manual: Spark plug. Factory: I at 10, R at 20 (km x1000); 5,000 km racing
Replace air filter element

Fuel and air

Factory

Manual: Air filter. Factory: I at 10, R at 20 (km x1000)
Inspect clutch plates and springs

Primary and gearbox

Factory

Manual: Clutch wear.
Change fork oil

Front end

Factory

Manual: Fork oil. Factory: R at 20 and 40; every 10,000 km racing
Clean and grease rear suspension linkage

Rear suspension and frame

Factory

Manual: Bearings - rear suspension conrod assemblies.
Inspect rear shocks for leaks and damping

Rear suspension and frame

Factory

Manual: Rear shock absorber.

Every 15,000 mi or 4 years

1 item

Check valve clearances (shim adjusted)

Engine

Guideline

Every 18,000 mi

1 item

Replace chain and sprockets (wear based)

Final drive

Guideline

Every 20,000 mi or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 24,000 mi or 4 years

1 item

Replace fuel filter

Fuel and air

Guideline

Every 24,800 mi

1 item

Clean oil strainers / mesh screens

Engine

Factory

Manual: Engine oil filter (on strainer). Factory: C (clean) at 24.8 (40) only

Every 25,000 mi or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 30,000 mi or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

4 items

Replace coolant

Engine

Factory

Manual: Coolant. Factory: Replace every 2 years
Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Replace brake fluid

Brakes

Factory

Manual: Brake fluid. Factory: Replace every 2 years

Every 4 years

3 items

Replace fuel lines

Fuel and air

Factory

Manual: Fuel hoses. Factory: Replace every 4 years
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.