
Avenger (160 cc)
Library entry covers 2006-2025
Published source
Bajaj Avenger 160 Street BS VI Owner's Manual, Periodic Maintenance & Lubrication Chart pp.26-35 (Bajaj Auto PDF on bajajauto.com; retrieved via Wayback capture 2024-08-07)
Factory owner's handbook. Covers Avenger 160 Street BS VI owner's manual.
Open the source57 items for a 2010 model, grouped by interval the way a factory chart is laid out.
How this bike is built (what the schedule is based on)
- Engine cycle
- Four-stroke
- Engine lubrication
- Wet sump (oil in crankcase)
- Oil filtration
- Replaceable cartridge or spin-on filter
- Valve gear
- Overhead cam, screw/locknut adjusters
- Ignition
- Electronic (CDI / transistor / ECU)
- Charging
- Alternator / stator with rectifier
- Battery
- Wet cell (flooded lead-acid, needs topping up)
- Fuel system
- Fuel injection
- Cooling
- Air / oil cooled
- Primary drive
- Gear or chain inside engine, shares engine oil
- Gearbox oil
- Shares engine oil
- Clutch control
- Hand lever, cable
- Final drive
- Chain
- Front suspension
- Telescopic fork
- Rear suspension
- Swingarm, twin shocks
- Front brake
- Disc, hydraulic
- Rear brake
- Drum (or band / belt rim)
- Wheels
- Spoked, tubed
- Sidecar
- No sidecar
2010 Bajaj Avenger (160 cc)
On the road: every 200 mi
1 item-
Check engine oil levelPre-ride / on the roadGuideline
Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.
On the road: every 300 mi
1 item-
Check lights, horn, brake light switchesPre-ride / on the roadGuideline
On the road: every 311 mi
1 item-
Lubricate drive chainPre-ride / on the roadFactory
Manual: Drive chain (customer). Factory: Customer to use OKS chain lube spray at every 500 km.
On the road: every 600 mi
1 item-
Check chain slack and rear wheel alignmentPre-ride / on the roadGuideline
On the road: every 3,107 mi
1 item-
Check tire pressuresPre-ride / on the roadFactory
Manual: Tire air pressure. Factory: C,A every service.
Every 1,000 mi or 6 months
2 items-
Adjust rear drum brake and rod / cable linkageBrakesGuideline
-
Inspect tire tread, sidewalls and date codesWheels and tiresGuideline
Every 3,000 mi or 12 months
5 items-
Check throttle cable(s) free play and returnFuel and airGuideline
-
Inspect chain and sprockets for wear (measure stretch)Final driveGuideline
-
Check footrests, pegs, rear brake and gear lever pivotsRear suspension and frameGuideline
-
Check spoke tension and wheel trueWheels and tiresGuideline
-
Check wheel bearings for playWheels and tiresGuideline
Every 3,107 mi
11 items-
All fasteners tightnessEngineFactory
Factory: C,T every service.
-
Check engine breather and oil returnEngineFactory
Manual: Engine breather tube for cracks. Factory: C,R each service from 9500-10000 km.
-
Clean / inspect air filterFuel and airFactory
Manual: Air cleaner element. Factory: CL every service except replacement services.
-
Clean battery terminals, check charge and strapIgnition and electricsFactory
Manual: Battery connections & health by load tester. Factory: C,A,L,T every service; petroleum jelly on terminals.
-
Adjust clutch free play, lubricate cable and lever pivotPrimary and gearboxFactory
Manual: Clutch, Throttle cable & Rear brake pedal free play adjustment. Factory: C,A every service.
-
Clean drive chain thoroughly (remove and soak, re-lube)Final driveFactory
Manual: Sealed Drive chain wear - Clean, lubricate & adjust. Factory: CL,L,A every service.
-
Check steering head bearing adjustmentFront endFactory
Manual: Steering play. Factory: C,A every service.
-
Inspect fork seals, stanchions and fork bootsFront endFactory
Manual: Front fork oil & seals. Factory: C,R every service.
-
Grease swingarm pivotRear suspension and frameFactory
Manual: Swing arm pivot pin. Factory: L every service; NRB lubricate every 40,000 km.
-
Lubricate brake cam spindles, check linings and drumsBrakesFactory
Manual: Rear brake cam. Factory: CL,L every service from 4500-5000 km.
-
Lubricate control cables and lever pivotsControls and cablesFactory
Manual: General lubrication - Clutch lever & kick lever. Factory: L every service.
Every 5,000 mi or 12 months
1 item-
Replace oil filterEngineGuideline
Every 6,000 mi or 12 months
4 items-
Check charging voltage and regulator / cut-outIgnition and electricsGuideline
-
Check swingarm bushes for playRear suspension and frameGuideline
-
Inspect rear shocks for leaks and dampingRear suspension and frameGuideline
-
Lubricate speedometer / tachometer cables, check driveControls and cablesGuideline
A dry speedo cable whips the needle and eventually kills the instrument.
Every 6,214 mi
7 items-
Change engine oilEngineFactory
Manual: Engine oil (Bajaj DTSI 10000 oil). Factory: R at 1st service, every 10,000 km; top-up between. Services 500-750 km, then every 5000 km to 75000.
-
Check and adjust valve clearancesEngineFactory
Manual: Valve tappet clearance. Factory: C,A at 1st service then every 10,000 km.
-
Check engine mounting bolts and platesEngineFactory
Manual: Engine foundation silent bushes for cracks. Factory: C,R at 1st service then every 10,000 km.
-
Clean oil strainers / mesh screensEngineFactory
Manual: Oil strainer. Factory: Clean at time of oil change.
-
Inspect, clean and gap spark plugsEngineFactory
Manual: Spark plug clean & check gap. Factory: CL,A every 10,000 km.
-
Rear sprocket fasteners for loosenessEngineFactory
Factory: C,T at 1st service then every 10,000 km.
-
Repack / replace steering head bearingsFront endFactory
Manual: Steering stem bearing & Cap steering bearing. Factory: C,CL,L at 1st service then every 10,000 km.
Every 9,321 mi
2 items-
Replace air filter elementFuel and airFactory
Manual: Air cleaner element. Factory: Replace air filter element (and cover O ring) every 15,000 km.
-
Check brake pads and discsBrakesFactory
Manual: Rear Brake shoes and Front Brake pads for wear limit. Factory: Check every service; replace at every 15,000 km.
Every 10,000 mi or 2 years
1 item-
Compression test (or leak-down)EngineGuideline
Every 12,000 mi or 2 years
1 item-
Synchronize throttle bodiesFuel and airGuideline
Every 12,427 mi
2 items-
Clean centrifugal oil filter (rotor / slinger)EngineFactory
Manual: Centrifugal oil filter. Factory: Clean at 1st free service and every 20,000 km.
-
Grease and check center / side stand and springsRear suspension and frameFactory
Manual: Main stand & side stand both pivot pin. Factory: C,L at 1st service then every 20,000 km.
Every 15,000 mi or 3 years
1 item-
Change fork oilFront endGuideline
Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.
Every 15,000 mi
1 item-
Replace brake linings / skim drums (wear based)BrakesGuideline
Every 18,000 mi
1 item-
Replace chain and sprockets (wear based)Final driveGuideline
Every 18,641 mi
2 items-
Replace spark plugsEngineFactory
Manual: Spark plug. Factory: Replace at every 30,000 km.
-
Replace brake fluidBrakesFactory
Manual: Brake fluid (DOT 4). Factory: Top up each service; replace with master/caliper seals every 30,000 km.
Every 20,000 mi or 4 years
1 item-
Repack / replace wheel bearingsWheels and tiresGuideline
Cup-and-cone and taper roller hubs need periodic repacking and adjustment.
Every 24,000 mi or 4 years
1 item-
Replace fuel filterFuel and airGuideline
Every 25,000 mi or 6 years
1 item-
Replace swingarm bushes / bearingsRear suspension and frameGuideline
Every 30,000 mi or 6 years
1 item-
Rebuild forks: seals, bushes, springsFront endGuideline
Every 2 years
2 items-
Inspect wiring, bullet connectors and ground pointsIgnition and electricsGuideline
-
Inspect frame, welds and lugs for cracksRear suspension and frameGuideline
Every 4 years
3 items-
Replace fuel linesFuel and airGuideline
Old rubber and modern ethanol fuel do not mix well.
-
Inspect brake hoses; replace old rubberBrakesGuideline
-
Rebuild calipers and master cylinders (seals)BrakesGuideline
Every 6 years
2 items-
Replace inner tubes and rim tape with tiresWheels and tiresGuideline
-
Replace tires on age (regardless of tread)Wheels and tiresGuideline
Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.
Keep up with this schedule on your phone
Add the bike in the app and this chart loads itself, ready to log against and edit.


