MotoService Log
No photo of this model in the library yet.
Bajaj · Overhead-cam four-stroke single, wet sump, gearbox shares engine oil, chain drive

CT 110

Library entry covers 2021-2025

27 factory 28 guideline

Published source

Bajaj CT110X BS VI Owner's Manual, Periodic Maintenance & Lubrication Chart pp.26-32 (Bajaj Auto PDF on cdn.bajajauto.com; retrieved via Wayback capture 2024-06-16)

Factory owner's handbook. Covers CT110X BS VI owner's manual (CT 110 variant).

Open the source

55 items for a 2025 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)
Engine cycle
Four-stroke
Engine lubrication
Wet sump (oil in crankcase)
Oil filtration
Replaceable cartridge or spin-on filter
Valve gear
Overhead cam, screw/locknut adjusters
Ignition
Electronic (CDI / transistor / ECU)
Charging
Alternator / stator with rectifier
Battery
Wet cell (flooded lead-acid, needs topping up)
Fuel system
Fuel injection
Cooling
Air / oil cooled
Primary drive
Gear or chain inside engine, shares engine oil
Gearbox oil
Shares engine oil
Clutch control
Hand lever, cable
Final drive
Chain
Front suspension
Telescopic fork
Rear suspension
Swingarm, twin shocks
Front brake
Drum (or band / stirrup)
Rear brake
Drum (or band / belt rim)
Wheels
Cast / alloy, tubeless
Sidecar
No sidecar
Maintenance schedule

2025 Bajaj CT 110

On the road: every 300 km

1 item
  • Check engine oil level
    Pre-ride / on the road
    Guideline

    Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

2 items
  • Check lights, horn, brake light switches
    Pre-ride / on the road
    Guideline
  • Lubricate drive chain
    Pre-ride / on the road
    Guideline

    Lube warm, ideally at the end of the riding day so it soaks in overnight. Sooner after rain.

On the road: every 1,000 km

1 item
  • Check chain slack and rear wheel alignment
    Pre-ride / on the road
    Guideline

On the road: every 5,000 km

1 item
  • Check tire pressures
    Pre-ride / on the road
    Factory

    Manual: Tire air pressure. Factory: C,A every service.

Every 1,600 km or 6 months

3 items
  • Adjust front drum brake
    Brakes
    Guideline
  • Adjust rear drum brake and rod / cable linkage
    Brakes
    Guideline
  • Inspect tire tread, sidewalls and date codes
    Wheels and tires
    Guideline

Every 5,000 km or 12 months

5 items
  • Check throttle cable(s) free play and return
    Fuel and air
    Guideline
  • Inspect chain and sprockets for wear (measure stretch)
    Final drive
    Guideline
  • Inspect fork seals, stanchions and fork boots
    Front end
    Guideline
  • Check footrests, pegs, rear brake and gear lever pivots
    Rear suspension and frame
    Guideline
  • Check wheel bearings for play
    Wheels and tires
    Guideline

Every 5,000 km

10 items
  • All fasteners tightness
    Engine
    Factory

    Factory: C,T every service.

  • Check and adjust valve clearances
    Engine
    Factory

    Manual: Valve tappet clearance. Factory: C,A every service.

  • Check engine breather and oil return
    Engine
    Factory

    Manual: Engine breather tube for cracks. Factory: C,R each service from 9500-10000 km.

  • Clean / inspect air filter
    Fuel and air
    Factory

    Manual: Air cleaner element. Factory: CL every service except replacement services.

  • Clean battery terminals, check charge and strap
    Ignition and electrics
    Factory

    Manual: Battery, connections & health by load tester. Factory: C,A,L,T every service.

  • Clean drive chain thoroughly (remove and soak, re-lube)
    Final drive
    Factory

    Manual: Non-sealed Drive chain wear - Clean, Lubricate & adjust. Factory: Remove, clean in diesel, lubricate with molten chain grease every service.

  • Check steering head bearing adjustment
    Front end
    Factory

    Manual: Steering play. Factory: C,A every service.

  • General lubrication - Clutch lever, Front Brake Lever
    Brakes
    Factory

    Factory: L every service.

  • Lubricate brake cam spindles, check linings and drums
    Brakes
    Factory

    Manual: Brake cam (Front & Rear). Factory: CL,L every service from 9500-10000 km.

  • Lubricate control cables and lever pivots
    Controls and cables
    Factory

    Manual: All cables free play adjustment. Factory: C,A every service.

Every 6,500 km or 12 months

1 item
  • Adjust clutch free play, lubricate cable and lever pivot
    Primary and gearbox
    Guideline

Every 9,500 km or 12 months

4 items
  • Check charging voltage and regulator / cut-out
    Ignition and electrics
    Guideline
  • Check swingarm bushes for play
    Rear suspension and frame
    Guideline
  • Inspect rear shocks for leaks and damping
    Rear suspension and frame
    Guideline
  • Lubricate speedometer / tachometer cables, check drive
    Controls and cables
    Guideline

    A dry speedo cable whips the needle and eventually kills the instrument.

Every 10,000 km

9 items
  • Change engine oil
    Engine
    Factory

    Manual: Engine oil (Bajaj DTSI 10000 oil). Factory: R at 1st service, every 10,000 km; top-up between. Services 500-750 km, then every 5000 km to 75000.

  • Check engine mounting bolts and plates
    Engine
    Factory

    Manual: Engine foundation silent bushes for cracks. Factory: C,R at 1st service then every 10,000 km.

  • Clean oil strainers / mesh screens
    Engine
    Factory

    Manual: Oil strainer. Factory: Clean at time of oil change.

  • Inspect, clean and gap spark plugs
    Engine
    Factory

    Manual: Spark plug clean & check gap. Factory: CL,A every 10,000 km.

  • Rear sprocket fasteners for looseness
    Engine
    Factory

    Factory: C,T at 1st service then every 10,000 km.

  • Replace oil filter
    Engine
    Factory

    Manual: Engine oil Filter. Factory: Replace in 1st service and at every 10,000 km.

  • Clean carburetor float bowl(s), check float level and jets
    Fuel and air
    Factory

    Manual: Carburetor float chamber cleaning. Factory: CL at 1st service then every 10,000 km.

  • Clean fuel tap filter / sediment bowl
    Fuel and air
    Factory

    Manual: Fuel cock sediment bowl cleaning. Factory: CL at 1st service then every 10,000 km.

  • Repack / replace steering head bearings
    Front end
    Factory

    Manual: Steering stem bearing & Cap steering bearing. Factory: C,CL,L at 1st service then every 10,000 km.

Every 15,000 km

3 items
  • Replace air filter element
    Fuel and air
    Factory

    Manual: Air cleaner element. Factory: Replace air filter element (and cover O ring) every 15,000 km.

  • Replace fuel lines
    Fuel and air
    Factory

    Manual: Fuel pipes for cracks. Factory: Check every service; replace at every 15,000 km.

  • Replace brake linings / skim drums (wear based)
    Brakes
    Factory

    Manual: Brake shoes (Front & Rear) for wear limit. Factory: Check every service; R at 15,000 km multiples per chart.

Every 16,000 km or 2 years

1 item
  • Compression test (or leak-down)
    Engine
    Guideline

Every 19,500 km or 2 years

2 items
  • Synchronize throttle bodies
    Fuel and air
    Guideline
  • Grease swingarm pivot
    Rear suspension and frame
    Guideline

Every 20,000 km

2 items
  • Drive chain link lock
    Final drive
    Factory

    Factory: Replace at every 20,000 km.

  • Grease and check center / side stand and springs
    Rear suspension and frame
    Factory

    Manual: Main stand & side stand both pivot pin. Factory: C,L at 1st service then every 20,000 km.

Every 29,000 km

1 item
  • Replace chain and sprockets (wear based)
    Final drive
    Guideline

Every 30,000 km

2 items
  • Replace spark plugs
    Engine
    Factory

    Manual: Spark plug. Factory: Replace at every 30,000 km.

  • Change fork oil
    Front end
    Factory

    Manual: Front fork oil & seal. Factory: Replace oil, oil seal and dust seal at every 30,000 km; check each service.

Every 32,000 km or 4 years

1 item
  • Repack / replace wheel bearings
    Wheels and tires
    Guideline

    Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 38,500 km or 4 years

1 item
  • Replace fuel filter
    Fuel and air
    Guideline

Every 40,000 km or 6 years

1 item
  • Replace swingarm bushes / bearings
    Rear suspension and frame
    Guideline

Every 48,500 km or 6 years

1 item
  • Rebuild forks: seals, bushes, springs
    Front end
    Guideline

Every 2 years

2 items
  • Inspect wiring, bullet connectors and ground points
    Ignition and electrics
    Guideline
  • Inspect frame, welds and lugs for cracks
    Rear suspension and frame
    Guideline

Every 6 years

1 item
  • Replace tires on age (regardless of tread)
    Wheels and tires
    Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.

Keep up with this schedule on your phone

Add the bike in the app and this chart loads itself, ready to log against and edit.

Coming soon to Google Play

Other 2025 Bajaj models

All 2025 Bajaj