No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

Bimota · Shim-adjusted overhead-cam four-stroke, wet sump, gearbox shares engine oil, chain drive

Tesi 3D (803 cc)

Library entry covers 2007-2019

26 factory 47 guideline

Published source

Bimota Tesi3D 2009 Workshop Manual, tabella manutenzione periodica (ManualsLib viewer p.24)

Factory service manual. Covers Bimota Tesi3D 2009 Workshop Manual (Italian table read; page footer Tesi3D); other years of the 2007-2019 row not compared.

73 items for a 2010 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, shim adjusted (incl. desmo)
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Air / oil cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Shares engine oil
Clutch control: Hand lever, cable
Final drive: Chain
Front suspension: Telescopic fork
Rear suspension: Swingarm, single shock / cantilever
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

2010 Bimota Tesi 3D (803 cc)

On the road: every 300 km

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

3 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline
Lubricate drive chain

Pre-ride / on the road

Guideline

Lube warm, ideally at the end of the riding day so it soaks in overnight. Sooner after rain.

On the road: every 1,000 km

1 item

Check chain slack and rear wheel alignment

Pre-ride / on the road

Guideline

Every 1,000 km

6 items

Engine oil level (check)

Engine

Factory

Factory: Tabella manutenzione periodica (workshop manual p.20, ManualsLib viewer p.24, Italian): at pre-delivery, then every 1,000 km. Columns as printed: pre-delivery, after the first 1,000 km, every 1,000 km, every 10,000 km, every 20,000 km, every 30,000 km. Codes: C check and adjust; L lubricate or grease; P clean; S replace.
Battery charging system (check)

Ignition and electrics

Factory

Factory: Tabella manutenzione periodica (workshop manual p.20, ManualsLib viewer p.24, Italian): after the first 1,000 km, then every 1,000 km. Columns as printed: pre-delivery, after the first 1,000 km, every 1,000 km, every 10,000 km, every 20,000 km, every 30,000 km. Codes: C check and adjust; L lubricate or grease; P clean; S replace.
Chain tension and lubrication

Final drive

Factory

Factory: Tabella manutenzione periodica (workshop manual p.20, ManualsLib viewer p.24, Italian): every 1,000 km. Columns as printed: pre-delivery, after the first 1,000 km, every 1,000 km, every 10,000 km, every 20,000 km, every 30,000 km. Codes: C check and adjust; L lubricate or grease; P clean; S replace.
Brake and clutch fluid (check)

Brakes

Factory

Factory: Tabella manutenzione periodica (workshop manual p.20, ManualsLib viewer p.24, Italian): every 1,000 km. Columns as printed: pre-delivery, after the first 1,000 km, every 1,000 km, every 10,000 km, every 20,000 km, every 30,000 km. Codes: C check and adjust; L lubricate or grease; P clean; S replace.
Brake pad wear (check)

Brakes

Factory

Factory: Tabella manutenzione periodica (workshop manual p.20, ManualsLib viewer p.24, Italian): every 1,000 km. Columns as printed: pre-delivery, after the first 1,000 km, every 1,000 km, every 10,000 km, every 20,000 km, every 30,000 km. Codes: C check and adjust; L lubricate or grease; P clean; S replace.
Tires: wear and pressure (check)

Wheels and tires

Factory

Factory: Tabella manutenzione periodica (workshop manual p.20, ManualsLib viewer p.24, Italian): at pre-delivery, then every 1,000 km. Columns as printed: pre-delivery, after the first 1,000 km, every 1,000 km, every 10,000 km, every 20,000 km, every 30,000 km. Codes: C check and adjust; L lubricate or grease; P clean; S replace.

Every 1,600 km or 6 months

1 item

Inspect tire tread, sidewalls and date codes

Wheels and tires

Guideline

Every 5,000 km or 12 months

9 items

Check throttle cable(s) free play and return

Fuel and air

Guideline
Clean drive chain thoroughly (remove and soak, re-lube)

Final drive

Guideline

Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.
Inspect chain and sprockets for wear (measure stretch)

Final drive

Guideline
Check steering head bearing adjustment

Front end

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline
Check brake pads and discs

Brakes

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 6,500 km or 12 months

2 items

Inspect, clean and gap spark plugs

Engine

Guideline
Adjust clutch free play, lubricate cable and lever pivot

Primary and gearbox

Guideline

Every 8,000 km or 12 months

2 items

Change engine oil

Engine

Guideline

Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.
Replace oil filter

Engine

Guideline

Every 9,500 km or 12 months

6 items

Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 10,000 km

9 items

Engine oil (replace)

Engine

Factory

Factory: Tabella manutenzione periodica (workshop manual p.20, ManualsLib viewer p.24, Italian): after the first 1,000 km, then every 10,000 km. Columns as printed: pre-delivery, after the first 1,000 km, every 1,000 km, every 10,000 km, every 20,000 km, every 30,000 km. Codes: C check and adjust; L lubricate or grease; P clean; S replace.
Engine oil filter (replace)

Engine

Factory

Factory: Tabella manutenzione periodica (workshop manual p.20, ManualsLib viewer p.24, Italian): after the first 1,000 km, then every 10,000 km. Columns as printed: pre-delivery, after the first 1,000 km, every 1,000 km, every 10,000 km, every 20,000 km, every 30,000 km. Codes: C check and adjust; L lubricate or grease; P clean; S replace.
General vehicle road test

Engine

Factory

Factory: Tabella manutenzione periodica (workshop manual p.20, ManualsLib viewer p.24, Italian): every 10,000 km. Columns as printed: pre-delivery, after the first 1,000 km, every 1,000 km, every 10,000 km, every 20,000 km, every 30,000 km. Codes: C check and adjust; L lubricate or grease; P clean; S replace.
Safety-critical fasteners (check tightening)

Engine

Factory

Factory: Tabella manutenzione periodica (workshop manual p.20, ManualsLib viewer p.24, Italian): every 10,000 km. Columns as printed: pre-delivery, after the first 1,000 km, every 1,000 km, every 10,000 km, every 20,000 km, every 30,000 km. Codes: C check and adjust; L lubricate or grease; P clean; S replace.
Spark plugs (replace)

Engine

Factory

Factory: Tabella manutenzione periodica (workshop manual p.20, ManualsLib viewer p.24, Italian): every 10,000 km. Columns as printed: pre-delivery, after the first 1,000 km, every 1,000 km, every 10,000 km, every 20,000 km, every 30,000 km. Codes: C check and adjust; L lubricate or grease; P clean; S replace.
Valve clearance (check)

Engine

Factory

Factory: Tabella manutenzione periodica (workshop manual p.20, ManualsLib viewer p.24, Italian): every 10,000 km. Columns as printed: pre-delivery, after the first 1,000 km, every 1,000 km, every 10,000 km, every 20,000 km, every 30,000 km. Codes: C check and adjust; L lubricate or grease; P clean; S replace.
Air filter (clean)

Fuel and air

Factory

Factory: Tabella manutenzione periodica (workshop manual p.20, ManualsLib viewer p.24, Italian): every 10,000 km. Columns as printed: pre-delivery, after the first 1,000 km, every 1,000 km, every 10,000 km, every 20,000 km, every 30,000 km. Codes: C check and adjust; L lubricate or grease; P clean; S replace.
Timing belts (check)

Ignition and electrics

Factory

Factory: Tabella manutenzione periodica (workshop manual p.20, ManualsLib viewer p.24, Italian): after the first 1,000 km, then every 10,000 km. Columns as printed: pre-delivery, after the first 1,000 km, every 1,000 km, every 10,000 km, every 20,000 km, every 30,000 km. Codes: C check and adjust; L lubricate or grease; P clean; S replace.
Brake and clutch hydraulic controls (check)

Brakes

Factory

Factory: Tabella manutenzione periodica (workshop manual p.20, ManualsLib viewer p.24, Italian): at pre-delivery, then every 10,000 km. Columns as printed: pre-delivery, after the first 1,000 km, every 1,000 km, every 10,000 km, every 20,000 km, every 30,000 km. Codes: C check and adjust; L lubricate or grease; P clean; S replace.

Every 16,000 km or 2 years

1 item

Compression test (or leak-down)

Engine

Guideline

Every 19,500 km or 2 years

4 items

Replace air filter element

Fuel and air

Guideline
Synchronize throttle bodies

Fuel and air

Guideline
Clean and grease rear suspension linkage

Rear suspension and frame

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 20,000 km

8 items

Cylinder compression (check)

Engine

Factory

Factory: Tabella manutenzione periodica (workshop manual p.20, ManualsLib viewer p.24, Italian): every 20,000 km. Columns as printed: pre-delivery, after the first 1,000 km, every 1,000 km, every 10,000 km, every 20,000 km, every 30,000 km. Codes: C check and adjust; L lubricate or grease; P clean; S replace.
Engine oil pressure (check)

Engine

Factory

Factory: Tabella manutenzione periodica (workshop manual p.20, ManualsLib viewer p.24, Italian): every 20,000 km. Columns as printed: pre-delivery, after the first 1,000 km, every 1,000 km, every 10,000 km, every 20,000 km, every 30,000 km. Codes: C check and adjust; L lubricate or grease; P clean; S replace.
General lubrication and greasing

Engine

Factory

Factory: Tabella manutenzione periodica (workshop manual p.20, ManualsLib viewer p.24, Italian): every 20,000 km. Columns as printed: pre-delivery, after the first 1,000 km, every 1,000 km, every 10,000 km, every 20,000 km, every 30,000 km. Codes: C check and adjust; L lubricate or grease; P clean; S replace.
Throttle body synchronization and idle (check)

Engine

Factory

Factory: Tabella manutenzione periodica (workshop manual p.20, ManualsLib viewer p.24, Italian): every 20,000 km. Columns as printed: pre-delivery, after the first 1,000 km, every 1,000 km, every 10,000 km, every 20,000 km, every 30,000 km. Codes: C check and adjust; L lubricate or grease; P clean; S replace.
Fuel filter (replace)

Fuel and air

Factory

Factory: Tabella manutenzione periodica (workshop manual p.20, ManualsLib viewer p.24, Italian): every 20,000 km. Columns as printed: pre-delivery, after the first 1,000 km, every 1,000 km, every 10,000 km, every 20,000 km, every 30,000 km. Codes: C check and adjust; L lubricate or grease; P clean; S replace.
Fuel tank (clean)

Fuel and air

Factory

Factory: Tabella manutenzione periodica (workshop manual p.20, ManualsLib viewer p.24, Italian): every 20,000 km. Columns as printed: pre-delivery, after the first 1,000 km, every 1,000 km, every 10,000 km, every 20,000 km, every 30,000 km. Codes: C check and adjust; L lubricate or grease; P clean; S replace.
Timing belts (replace)

Ignition and electrics

Factory

Factory: Tabella manutenzione periodica (workshop manual p.20, ManualsLib viewer p.24, Italian): every 20,000 km. Columns as printed: pre-delivery, after the first 1,000 km, every 1,000 km, every 10,000 km, every 20,000 km, every 30,000 km. Codes: C check and adjust; L lubricate or grease; P clean; S replace.
Steering bearing play (check)

Front end

Factory

Factory: Tabella manutenzione periodica (workshop manual p.20, ManualsLib viewer p.24, Italian): every 20,000 km. Columns as printed: pre-delivery, after the first 1,000 km, every 1,000 km, every 10,000 km, every 20,000 km, every 30,000 km. Codes: C check and adjust; L lubricate or grease; P clean; S replace.

Every 24,000 km or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 24,000 km or 4 years

1 item

Check valve clearances (shim adjusted)

Engine

Guideline

Every 25,500 km or 4 years

1 item

Replace spark plugs

Engine

Guideline

Every 29,000 km

1 item

Replace chain and sprockets (wear based)

Final drive

Guideline

Every 30,000 km

2 items

Engine oil intake filter (check and clean)

Engine

Factory

Factory: Tabella manutenzione periodica (workshop manual p.20, ManualsLib viewer p.24, Italian): every 30,000 km. Columns as printed: pre-delivery, after the first 1,000 km, every 1,000 km, every 10,000 km, every 20,000 km, every 30,000 km. Codes: C check and adjust; L lubricate or grease; P clean; S replace.
Front fork oil (replace)

Front end

Factory

Factory: Tabella manutenzione periodica (workshop manual p.20, ManualsLib viewer p.24, Italian): every 30,000 km. Columns as printed: pre-delivery, after the first 1,000 km, every 1,000 km, every 10,000 km, every 20,000 km, every 30,000 km. Codes: C check and adjust; L lubricate or grease; P clean; S replace.

Every 32,000 km or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 38,500 km or 4 years

1 item

Replace fuel filter

Fuel and air

Guideline

Every 40,000 km or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 48,500 km or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

3 items

Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Replace brake fluid

Brakes

Guideline

Every 4 years

3 items

Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

No interval set

1 item

General cleaning

Engine

Factory

Factory: Tabella manutenzione periodica (workshop manual p.20, ManualsLib viewer p.24, Italian): at pre-delivery. Columns as printed: pre-delivery, after the first 1,000 km, every 1,000 km, every 10,000 km, every 20,000 km, every 30,000 km. Codes: C check and adjust; L lubricate or grease; P clean; S replace.

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.