No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

Bullit · Overhead-cam four-stroke single, wet sump, gearbox shares engine oil, chain drive

Bluroc 125

Library entry covers 2021

22 factory 36 guideline

Published source

Bullit Bluroc 125 Owner's Manual, Checking and maintenance / Agenda of maintenance printed pp.13-14

Factory owner's handbook. Covers Bullit Bluroc 125 owner's manual (ManualsLib 1981866), no year printed; km chart to 15000 km, repeat the pattern above that; dusty or bad roads: service more often.

58 items for a 2021 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, screw/locknut adjusters
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Air / oil cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Shares engine oil
Clutch control: Hand lever, cable
Final drive: Chain
Front suspension: Telescopic fork
Rear suspension: Swingarm, twin shocks
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Spoked, tubed
Sidecar: No sidecar

Maintenance schedule

2021 Bullit Bluroc 125

On the road: every 300 km

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

On the road: every 1,000 km

2 items

Check chain slack and rear wheel alignment

Pre-ride / on the road

Guideline
Lubricate drive chain

Pre-ride / on the road

Factory

Manual: Driving chain (inspect, lubricate, adjust). Factory: Agenda of maintenance pp.13-14 (columns 300 km, then 1000 to 15000 km in 1000 km steps, everyday check before riding; I = checking, clean, adjust; C = clean; R = change; A = adjust; L = lubrication; T = tight): every 1000 km I, L, A (Remark 3)

Every 1,000 km

2 items

Driving chain (inspect, adjust)

Final drive

Factory

Factory: Agenda of maintenance pp.13-14 (columns 300 km, then 1000 to 15000 km in 1000 km steps, everyday check before riding; I = checking, clean, adjust; C = clean; R = change; A = adjust; L = lubrication; T = tight): every 1000 km I, A; everyday check before riding: I
Brake pedal (I)

Brakes

Factory

Factory: Agenda of maintenance pp.13-14 (columns 300 km, then 1000 to 15000 km in 1000 km steps, everyday check before riding; I = checking, clean, adjust; C = clean; R = change; A = adjust; L = lubrication; T = tight): I at every 1000 km column and everyday check before riding

Every 2,000 km

2 items

Change engine oil

Engine

Factory

Manual: Oil for crankcase (change). Factory: Agenda of maintenance pp.13-14 (columns 300 km, then 1000 to 15000 km in 1000 km steps, everyday check before riding; I = checking, clean, adjust; C = clean; R = change; A = adjust; L = lubrication; T = tight): R at 300 km, then every 2000 km R
Clean oil strainers / mesh screens

Engine

Factory

Manual: Oil filter and oil net (clean). Factory: Agenda of maintenance pp.13-14 (columns 300 km, then 1000 to 15000 km in 1000 km steps, everyday check before riding; I = checking, clean, adjust; C = clean; R = change; A = adjust; L = lubrication; T = tight): C at 300 km, then every 2000 km C

Every 4,000 km

12 items

Check and adjust valve clearances

Engine

Factory

Manual: Valve clearance (I). Factory: Agenda of maintenance pp.13-14 (columns 300 km, then 1000 to 15000 km in 1000 km steps, everyday check before riding; I = checking, clean, adjust; C = clean; R = change; A = adjust; L = lubrication; T = tight): I at 1000, 4000, 8000 and 12000 km
Friction disc (I)

Engine

Factory

Factory: Agenda of maintenance pp.13-14 (columns 300 km, then 1000 to 15000 km in 1000 km steps, everyday check before riding; I = checking, clean, adjust; C = clean; R = change; A = adjust; L = lubrication; T = tight): I at 4000, 8000 and 12000 km
Front headlight beam adjustment (I)

Engine

Factory

Factory: Agenda of maintenance pp.13-14 (columns 300 km, then 1000 to 15000 km in 1000 km steps, everyday check before riding; I = checking, clean, adjust; C = clean; R = change; A = adjust; L = lubrication; T = tight): I at 4000, 8000 and 12000 km
Inspect, clean and gap spark plugs

Engine

Factory

Manual: Spark plug (I). Factory: Agenda of maintenance pp.13-14 (columns 300 km, then 1000 to 15000 km in 1000 km steps, everyday check before riding; I = checking, clean, adjust; C = clean; R = change; A = adjust; L = lubrication; T = tight): I at 1000, 4000, 8000 and 12000 km
Clean / inspect air filter

Fuel and air

Factory

Manual: Air filter (clean). Factory: Agenda of maintenance pp.13-14 (columns 300 km, then 1000 to 15000 km in 1000 km steps, everyday check before riding; I = checking, clean, adjust; C = clean; R = change; A = adjust; L = lubrication; T = tight): every 4000 km clean filter, if necessary please change (Remark 1)
Replace fuel filter

Fuel and air

Factory

Manual: Gasoline filter (clean). Factory: Agenda of maintenance pp.13-14 (columns 300 km, then 1000 to 15000 km in 1000 km steps, everyday check before riding; I = checking, clean, adjust; C = clean; R = change; A = adjust; L = lubrication; T = tight): C at 4000, 8000 and 12000 km
Adjust clutch free play, lubricate cable and lever pivot

Primary and gearbox

Factory

Manual: Clutch (I). Factory: Agenda of maintenance pp.13-14 (columns 300 km, then 1000 to 15000 km in 1000 km steps, everyday check before riding; I = checking, clean, adjust; C = clean; R = change; A = adjust; L = lubrication; T = tight): I at 1000, 4000, 8000 and 12000 km
Grease and check center / side stand and springs

Rear suspension and frame

Factory

Manual: Stand (I). Factory: Agenda of maintenance pp.13-14 (columns 300 km, then 1000 to 15000 km in 1000 km steps, everyday check before riding; I = checking, clean, adjust; C = clean; R = change; A = adjust; L = lubrication; T = tight): I at 4000, 8000 and 12000 km
Inspect rear shocks for leaks and damping

Rear suspension and frame

Factory

Manual: Suspension (I). Factory: Agenda of maintenance pp.13-14 (columns 300 km, then 1000 to 15000 km in 1000 km steps, everyday check before riding; I = checking, clean, adjust; C = clean; R = change; A = adjust; L = lubrication; T = tight): I at 4000, 8000 and 12000 km
Brake (I)

Brakes

Factory

Factory: Agenda of maintenance pp.13-14 (columns 300 km, then 1000 to 15000 km in 1000 km steps, everyday check before riding; I = checking, clean, adjust; C = clean; R = change; A = adjust; L = lubrication; T = tight): I at 4000, 8000 and 12000 km
Check brake pads and discs

Brakes

Factory

Manual: Brake system (inspect, adjust). Factory: Agenda of maintenance pp.13-14 (columns 300 km, then 1000 to 15000 km in 1000 km steps, everyday check before riding; I = checking, clean, adjust; C = clean; R = change; A = adjust; L = lubrication; T = tight): I, A at 300, 4000, 8000 and 12000 km
Inspect tire tread, sidewalls and date codes

Wheels and tires

Factory

Manual: Wheel (I). Factory: Agenda of maintenance pp.13-14 (columns 300 km, then 1000 to 15000 km in 1000 km steps, everyday check before riding; I = checking, clean, adjust; C = clean; R = change; A = adjust; L = lubrication; T = tight): I at 1000, 4000, 8000 and 12000 km (Remark 3)

Every 5,000 km or 12 months

7 items

Check throttle cable(s) free play and return

Fuel and air

Guideline
Clean drive chain thoroughly (remove and soak, re-lube)

Final drive

Guideline

Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.
Inspect chain and sprockets for wear (measure stretch)

Final drive

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Check spoke tension and wheel true

Wheels and tires

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 5,000 km

1 item

Screw (tighten)

Engine

Factory

Factory: Agenda of maintenance pp.13-14 (columns 300 km, then 1000 to 15000 km in 1000 km steps, everyday check before riding; I = checking, clean, adjust; C = clean; R = change; A = adjust; L = lubrication; T = tight): T at 300, 5000, 10000 and 15000 km

Every 8,000 km or 12 months

1 item

Replace oil filter

Engine

Guideline

Every 8,000 km

1 item

Screw/bolt/fasteners (I)

Engine

Factory

Factory: Agenda of maintenance pp.13-14 (columns 300 km, then 1000 to 15000 km in 1000 km steps, everyday check before riding; I = checking, clean, adjust; C = clean; R = change; A = adjust; L = lubrication; T = tight): I at 1000 and 8000 km (Remark 3)

Every 9,500 km or 12 months

4 items

Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 12,000 km

1 item

Check steering head bearing adjustment

Front end

Factory

Manual: Turning system (I). Factory: Agenda of maintenance pp.13-14 (columns 300 km, then 1000 to 15000 km in 1000 km steps, everyday check before riding; I = checking, clean, adjust; C = clean; R = change; A = adjust; L = lubrication; T = tight): I at 1000 and 12000 km

Every 16,000 km or 2 years

1 item

Compression test (or leak-down)

Engine

Guideline

Every 19,500 km or 2 years

3 items

Replace air filter element

Fuel and air

Guideline
Synchronize throttle bodies

Fuel and air

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 24,000 km or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 25,500 km or 4 years

1 item

Replace spark plugs

Engine

Guideline

Every 29,000 km

1 item

Replace chain and sprockets (wear based)

Final drive

Guideline

Every 32,000 km or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 40,000 km or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 48,500 km or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

3 items

Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Replace brake fluid

Brakes

Guideline

Every 4 years

3 items

Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

2 items

Replace inner tubes and rim tape with tires

Wheels and tires

Guideline
Replace tires on age (regardless of tread)

Wheels and tires

Guideline

No interval set

2 items

Oil for crankcase (check, pre-ride check)

Engine

Factory

Factory: Agenda of maintenance pp.13-14 (columns 300 km, then 1000 to 15000 km in 1000 km steps, everyday check before riding; I = checking, clean, adjust; C = clean; R = change; A = adjust; L = lubrication; T = tight): everyday check before riding: I
Brake oil (check, pre-ride check)

Brakes

Factory

Factory: Agenda of maintenance pp.13-14 (columns 300 km, then 1000 to 15000 km in 1000 km steps, everyday check before riding; I = checking, clean, adjust; C = clean; R = change; A = adjust; L = lubrication; T = tight): everyday check before riding: I

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.