No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

Can-Am · Shim-adjusted overhead-cam four-stroke triple, dry sump, gearbox shares engine oil, belt drive

Canyon XT

Library entry covers 2025

30 factory 47 guideline

Published source

Can-Am Canyon Series MY25 Operator's Guide, regular maintenance tables pp.6-4 to 6-8 (BRP operator guide portal)

Factory source. Covers BRP Operator's Guide, Canyon Series MY25 (document title); earlier years not compared; the guide lists Canyon STD, Canyon XT and Canyon Redrock Edition under Covered Models.

77 items for a 2025 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Dry sump (separate oil tank)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, shim adjusted (incl. desmo)
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Liquid cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Shares engine oil
Clutch control: Automatic or semi-automatic
Final drive: Toothed belt
Front suspension: Telescopic fork
Rear suspension: Swingarm, single shock / cantilever
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

2025 Can-Am Canyon XT

On the road: every 200 mi

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 300 mi

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

On the road: every 500 mi

1 item

Check coolant level

Pre-ride / on the road

Guideline

Every 932 mi

1 item

Engine oil level (inspect)

Engine

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): every 1,500 km (1,000 mi) regardless of calendar time. Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.

Every 1,000 mi or 6 months

1 item

Inspect tire tread, sidewalls and date codes

Wheels and tires

Guideline

Every 3,000 mi or 12 months

8 items

Check throttle cable(s) free play and return

Fuel and air

Guideline
Adjust automatic / semi-automatic clutch

Primary and gearbox

Guideline
Check steering head bearing adjustment

Front end

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline
Check brake pads and discs

Brakes

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 4,000 mi or 12 months

1 item

Inspect, clean and gap spark plugs

Engine

Guideline

Every 5,000 mi or 12 months

3 items

Change engine oil

Engine

Guideline

Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.
Replace oil filter

Engine

Guideline
Inspect drive belt, pulleys and tension

Final drive

Guideline

Every 6,000 mi or 12 months

7 items

Inspect coolant hoses and clamps

Engine

Guideline
Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 9,321 mi or 12 months

20 items

Body panels and hardware (inspect and torque)

Engine

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): I, T at break-in (5,000 km) and at each A service (1 year or 15,000 km). Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.
Drive belt alignment (inspect and adjust, dealer)

Engine

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): I, A at each A service (1 year or 15,000 km). Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.
Drive belt condition and tension (inspect and adjust, dealer)

Engine

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): I, A at break-in (5,000 km) and at each A service (1 year or 15,000 km). Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.
Drive components and function (inspect)

Engine

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): I at break-in (5,000 km) and at each A service (1 year or 15,000 km). Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.
Engine cooling components (inspect and adjust)

Engine

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): I, A at break-in (5,000 km) and at each A service (1 year or 15,000 km). Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.
Engine oil and oil filter (replace)

Engine

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): R at break-in (5,000 km) and at each A service (1 year or 15,000 km). Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.
Engine seals and gaskets (inspect)

Engine

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): I at each A service (1 year or 15,000 km). Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.
Exhaust clamp rings (inspect and torque)

Engine

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): I, T at each A service (1 year or 15,000 km). Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.
Exhaust components (inspect)

Engine

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): I at each A service (1 year or 15,000 km). Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.
Modules and software updates (inspect)

Engine

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): I at each A service (1 year or 15,000 km). Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.
Pivots, latches, hinges and key barrels (lubricate)

Engine

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): L at break-in (5,000 km) and at each A service (1 year or 15,000 km). Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.
Radiator (clean)

Engine

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): C at each A service (1 year or 15,000 km). Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.
Throttle operation (inspect)

Engine

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): I at each A service (1 year or 15,000 km). Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.
Fuel components and function (inspect)

Fuel and air

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): I at each A service (1 year or 15,000 km). Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.
Battery connections and condition (inspect)

Ignition and electrics

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): I at each A service (1 year or 15,000 km). Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.
Steering components and function (inspect)

Front end

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): I at each A service (1 year or 15,000 km). Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.
Brake components and function (inspect)

Brakes

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): I at break-in (5,000 km) and at each A service (1 year or 15,000 km). Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.
Tires (inspect and adjust)

Wheels and tires

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): I, A at each A service (1 year or 15,000 km). Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.
Wheel lug nuts and rear axle nut (torque)

Wheels and tires

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): T at break-in (5,000 km) and at each A service (1 year or 15,000 km). Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.
Control switches and lighting (inspect)

Controls and cables

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): I at break-in (5,000 km) and at each A service (1 year or 15,000 km). Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.

Every 9,321 mi

2 items

Engine air filter (replace)

Fuel and air

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): every 15,000 km (9,300 mi) regardless of calendar time; more often in dusty or wet conditions. Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.
Engine air filter housing (clean)

Fuel and air

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): every 15,000 km (9,300 mi) regardless of calendar time. Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.

Every 10,000 mi or 2 years

1 item

Compression test (or leak-down)

Engine

Guideline

Every 12,000 mi or 2 years

4 items

Replace air filter element

Fuel and air

Guideline
Synchronize throttle bodies

Fuel and air

Guideline
Clean and grease rear suspension linkage

Rear suspension and frame

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 15,000 mi or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 15,000 mi or 4 years

1 item

Check valve clearances (shim adjusted)

Engine

Guideline

Every 16,000 mi or 4 years

1 item

Replace spark plugs

Engine

Guideline

Every 20,000 mi or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 24,000 mi or 4 years

1 item

Replace fuel filter

Fuel and air

Guideline

Every 25,000 mi or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 27,962 mi or 5 years

3 items

Coolant (replace)

Engine

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): every 5 years or 45,000 km (28,000 mi). Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.
Suspension components and function (inspect)

Engine

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): I at the B service; the row also reads every 5 years or 45,000 km (28,000 mi). Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.
In-line fuel filter (replace)

Fuel and air

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): every 5 years or 45,000 km (28,000 mi). Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.

Every 27,962 mi

3 items

Canister vent pre-filter (replace)

Engine

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): every 45,000 km (28,000 mi), CARB and EVAP models. Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.
Spark plugs (replace)

Engine

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): every 45,000 km (28,000 mi). Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.
Hydraulic Control Module oil filter (replace)

Controls and cables

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): every 45,000 km (28,000 mi) regardless of calendar time. Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.

Every 30,000 mi or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 50,000 mi

1 item

Replace drive belt (wear or damage based)

Final drive

Guideline

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

5 items

Replace coolant

Engine

Guideline
Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Brake fluid (replace)

Brakes

Factory

Factory: Regular maintenance tables (2025 Canyon Series Operator's Guide pp.6-4 to 6-8): every 2 years regardless of the odometer. Columns as printed: break-in at 5,000 km (3,000 mi); A at 1 year or 15,000 km (9,300 mi); B after the 1st year or at 30,000 or 45,000 km (19,000 or 28,000 mi); repeat A and B alternately in later years; whichever of calendar time or odometer comes first. Key: A adjust, C clean, I inspect, L lubricate, R replace, T torque.
Replace brake fluid

Brakes

Guideline

Every 4 years

3 items

Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.