MotoService Log
No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

CCM · Shim-adjusted overhead-cam four-stroke, wet sump, gearbox shares engine oil, chain drive

Heritage (600 cc)

Library entry covers 2022-2023

34 factory 50 guideline

Published source

CCM 2024 Heritage 71 Owner's Manual, Scheduled Maintenance (ManualsLib viewer pp.35-38)

Factory source. Covers CCM Owners Manual 2024 Heritage 71 (cover); the row is 2022-2023 and earlier editions were not compared.

84 items for a 2023 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)
Engine cycle
Four-stroke
Engine lubrication
Wet sump (oil in crankcase)
Oil filtration
Replaceable cartridge or spin-on filter
Valve gear
Overhead cam, shim adjusted (incl. desmo)
Ignition
Electronic (CDI / transistor / ECU)
Charging
Alternator / stator with rectifier
Battery
Wet cell (flooded lead-acid, needs topping up)
Fuel system
Fuel injection
Cooling
Liquid cooled
Primary drive
Gear or chain inside engine, shares engine oil
Gearbox oil
Shares engine oil
Clutch control
Hand lever, hydraulic
Final drive
Chain
Front suspension
Telescopic fork
Rear suspension
Swingarm, single shock / cantilever
Front brake
Disc, hydraulic
Rear brake
Disc, hydraulic
Wheels
Cast / alloy, tubeless
Sidecar
No sidecar
Maintenance schedule

2023 CCM Heritage (600 cc)

On the road: every 200 mi

1 item
  • Check engine oil level
    Pre-ride / on the road
    Guideline

    Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 300 mi

3 items
  • Check lights, horn, brake light switches
    Pre-ride / on the road
    Guideline
  • Check tire pressures
    Pre-ride / on the road
    Guideline
  • Lubricate drive chain
    Pre-ride / on the road
    Guideline

    Lube warm, ideally at the end of the riding day so it soaks in overnight. Sooner after rain.

On the road: every 500 mi

1 item
  • Check coolant level
    Pre-ride / on the road
    Guideline

On the road: every 600 mi

1 item
  • Check chain slack and rear wheel alignment
    Pre-ride / on the road
    Guideline

Every 1,000 mi or 6 months

1 item
  • Inspect tire tread, sidewalls and date codes
    Wheels and tires
    Guideline

Every 3,000 mi or 12 months

9 items
  • Check throttle cable(s) free play and return
    Fuel and air
    Guideline
  • Clean drive chain thoroughly (remove and soak, re-lube)
    Final drive
    Guideline

    Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.

  • Inspect chain and sprockets for wear (measure stretch)
    Final drive
    Guideline
  • Check steering head bearing adjustment
    Front end
    Guideline
  • Inspect fork seals, stanchions and fork boots
    Front end
    Guideline
  • Check footrests, pegs, rear brake and gear lever pivots
    Rear suspension and frame
    Guideline
  • Grease and check center / side stand and springs
    Rear suspension and frame
    Guideline
  • Check brake pads and discs
    Brakes
    Guideline
  • Check wheel bearings for play
    Wheels and tires
    Guideline

Every 3,500 mi or 12 months

30 items
  • CCM software (scan and update)
    Engine
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): at 500 miles, then every 3,500 miles or annually. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Coolant (replace; Coolant Level row)
    Engine
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): inspect at 500 miles and at the annual check; marked in the replace column every 3,500 miles from 4,000 miles. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Cooling system (inspect)
    Engine
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): at 500 miles, then every 3,500 miles or annually. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Engine leaks (inspect)
    Engine
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): at 500 miles, then every 3,500 miles or annually. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Engine oil (replace)
    Engine
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): replace at 500 miles, then every 3,500 miles or annually. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Engine oil filter (replace)
    Engine
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): replace at 500 miles, then every 3,500 miles or annually. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Exhaust system (inspect)
    Engine
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): at 500 miles, then every 3,500 miles or annually. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Full bike fastener inspection
    Engine
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): at 500 miles, then every 3,500 miles or annually. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Lights, instruments and full electrical system (inspect)
    Engine
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): at 500 miles, then every 3,500 miles or annually. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Oil breather (replace)
    Engine
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): replace at 500 miles, then every 3,500 miles or annually. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Service record, inspection report and dash service indicator reset
    Engine
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): at 500 miles, then every 3,500 miles or annually. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Spark plugs (replace)
    Engine
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): inspect at 500 miles and at the annual check; replace every 3,500 miles from 4,000 miles. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Throttle body (check and adjust idle)
    Engine
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): at 500 miles, then every 3,500 miles or annually. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Air filter (replace)
    Fuel and air
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): inspect at 500 miles and at the annual check; replace every 3,500 miles from 4,000 miles. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Fuel system leaks and chafing (inspect)
    Fuel and air
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): at 500 miles, then every 3,500 miles or annually. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Clutch fluid (replace)
    Primary and gearbox
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): every 3,500 miles from 4,000 miles and at the annual check. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Clutch operation and free play (inspect)
    Primary and gearbox
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): at 500 miles, then every 3,500 miles or annually. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Chain, sprockets, tires and cables (replace if required)
    Final drive
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): at 500 miles, then every 3,500 miles or annually. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Drive chain slack, wear and slipper (inspect and adjust)
    Final drive
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): at 500 miles, then every 3,500 miles or annually. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Forks: leaks and smooth operation (inspect)
    Front end
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): at 500 miles, then every 3,500 miles or annually. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Steering free movement (inspect)
    Front end
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): at 500 miles, then every 3,500 miles or annually. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Outstanding service bulletins and warranty (check)
    Rear suspension and frame
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): at 500 miles, then every 3,500 miles or annually. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Rear suspension and swingarm (inspect)
    Rear suspension and frame
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): at 500 miles, then every 3,500 miles or annually. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Side stand operation (inspect)
    Rear suspension and frame
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): at 500 miles, then every 3,500 miles or annually. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Brake fluid (replace)
    Brakes
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): inspect at 500 miles; replace every 3,500 miles (from 4,000 miles) and at the annual check. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Brake pads, master cylinders and calipers (inspect)
    Brakes
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): at 500 miles, then every 3,500 miles or annually. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Tires: wear, damage and pressure (inspect)
    Wheels and tires
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): at 500 miles, then every 3,500 miles or annually. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Wheels for damage, wheel bearings, spokes (inspect)
    Wheels and tires
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): at 500 miles, then every 3,500 miles or annually. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Road test; customer bike setup of suspension and controls
    Controls and cables
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): at 500 miles, then every 3,500 miles or annually. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Throttle cables (inspect and adjust)
    Controls and cables
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): at 500 miles, then every 3,500 miles or annually. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

Every 3,500 mi

2 items
  • Headstock bearings (inspect)
    Engine
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): every 3,500 miles from 4,000 miles; not marked at 500 miles or the annual check. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Valve clearances (inspect and adjust)
    Engine
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): every 3,500 miles from 4,000 miles; not marked at 500 miles or the annual check. Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

Every 4,000 mi or 12 months

1 item
  • Inspect, clean and gap spark plugs
    Engine
    Guideline

Every 5,000 mi or 12 months

2 items
  • Change engine oil
    Engine
    Guideline

    Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.

  • Replace oil filter
    Engine
    Guideline

Every 6,000 mi or 12 months

7 items
  • Inspect coolant hoses and clamps
    Engine
    Guideline
  • Clean / inspect air filter
    Fuel and air
    Guideline

    Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.

  • Check charging voltage and regulator / cut-out
    Ignition and electrics
    Guideline
  • Check swingarm bushes for play
    Rear suspension and frame
    Guideline
  • Inspect rear shocks for leaks and damping
    Rear suspension and frame
    Guideline
  • Lubricate control cables and lever pivots
    Controls and cables
    Guideline
  • Lubricate speedometer / tachometer cables, check drive
    Controls and cables
    Guideline

    A dry speedo cable whips the needle and eventually kills the instrument.

Every 7,000 mi

2 items
  • Headstock bearings (adjust and grease)
    Engine
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): at 7,500 and 14,500 miles (every 7,000 miles). Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

  • Swingarm bushes (grease)
    Rear suspension and frame
    Factory

    Factory: Scheduled maintenance (manual pp.32-35, ManualsLib viewer pp.35-38): at 7,500 and 14,500 miles (every 7,000 miles). Columns as printed: 500, 4,000, 7,500, 11,000 and 14,500 miles, plus an annual check (done every year unless a mileage service is done instead), each split into R (replace) and I/A/L (inspect, adjust, lubricate). From 14,500 miles, carry out all items every 3,500 miles or annually, whichever comes first. Heavy use needs extra servicing.

Every 10,000 mi or 2 years

1 item
  • Compression test (or leak-down)
    Engine
    Guideline

Every 12,000 mi or 2 years

4 items
  • Replace air filter element
    Fuel and air
    Guideline
  • Synchronize throttle bodies
    Fuel and air
    Guideline
  • Clean and grease rear suspension linkage
    Rear suspension and frame
    Guideline
  • Grease swingarm pivot
    Rear suspension and frame
    Guideline

Every 15,000 mi or 3 years

1 item
  • Change fork oil
    Front end
    Guideline

    Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 15,000 mi or 4 years

1 item
  • Check valve clearances (shim adjusted)
    Engine
    Guideline

Every 16,000 mi or 4 years

1 item
  • Replace spark plugs
    Engine
    Guideline

Every 18,000 mi

1 item
  • Replace chain and sprockets (wear based)
    Final drive
    Guideline

Every 20,000 mi or 4 years

2 items
  • Repack / replace steering head bearings
    Front end
    Guideline

    Many old machines use loose balls in cups and cones. Taper roller conversions are common.

  • Repack / replace wheel bearings
    Wheels and tires
    Guideline

    Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 24,000 mi or 4 years

1 item
  • Replace fuel filter
    Fuel and air
    Guideline

Every 25,000 mi or 6 years

1 item
  • Replace swingarm bushes / bearings
    Rear suspension and frame
    Guideline

Every 30,000 mi or 6 years

1 item
  • Rebuild forks: seals, bushes, springs
    Front end
    Guideline

Every 6 months

1 item
  • Clean battery terminals, check charge and strap
    Ignition and electrics
    Guideline

Every 2 years

5 items
  • Replace coolant
    Engine
    Guideline
  • Inspect wiring, bullet connectors and ground points
    Ignition and electrics
    Guideline
  • Replace hydraulic clutch fluid
    Primary and gearbox
    Guideline
  • Inspect frame, welds and lugs for cracks
    Rear suspension and frame
    Guideline
  • Replace brake fluid
    Brakes
    Guideline

Every 4 years

3 items
  • Replace fuel lines
    Fuel and air
    Guideline

    Old rubber and modern ethanol fuel do not mix well.

  • Inspect brake hoses; replace old rubber
    Brakes
    Guideline
  • Rebuild calipers and master cylinders (seals)
    Brakes
    Guideline

Every 6 years

1 item
  • Replace tires on age (regardless of tread)
    Wheels and tires
    Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.

Keep up with this schedule on your phone

Add the bike in the app and this chart loads itself, ready to log against and edit.

Coming soon to Google Play

Other 2023 CCM models

All 2023 CCM
2018-2024
Spitfire 600
Factory
2021-2024
Maverick (600 cc)
Guideline
2021-2025
Street Moto (600 cc)
Guideline
2023
Classic Tracker
Guideline
2023
Six
Guideline
2023-2024
Street Tracker (600 cc)
Guideline