No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

CFMoto · Shim-adjusted overhead-cam four-stroke, wet sump, gearbox shares engine oil, chain drive

Ibex 800

Library entry covers 2023-2025

41 factory 50 guideline

Published source

CFMOTO IBEX 800 owner's manual, periodic maintenance schedule pp.106-111

Factory owner's handbook. Covers CFMOTO IBEX 800 owner's manual (listed as IBEX 800-T), no edition year.

91 items for a 2023 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, shim adjusted (incl. desmo)
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Liquid cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Shares engine oil
Clutch control: Hand lever, cable
Final drive: Chain
Front suspension: Telescopic fork
Rear suspension: Swingarm, single shock / cantilever
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

2023 CFMoto Ibex 800

On the road: every 300 km

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

3 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline
Lubricate drive chain

Pre-ride / on the road

Guideline

Lube warm, ideally at the end of the riding day so it soaks in overnight. Sooner after rain.

On the road: every 800 km

1 item

Check coolant level

Pre-ride / on the road

Guideline

On the road: every 1,000 km

1 item

Check chain slack and rear wheel alignment

Pre-ride / on the road

Guideline

Every 600 km

1 item

Chain (lubricate)

Final drive

Factory

Factory: Periodic maintenance schedule (p.110): every 600 km; check after riding on rainy days. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.

Every 1,000 km

1 item

Chain tightness (inspect)

Final drive

Factory

Factory: Periodic maintenance schedule (p.110): every 1,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.

Every 1,600 km or 6 months

1 item

Inspect tire tread, sidewalls and date codes

Wheels and tires

Guideline

Every 5,000 km or 6 months

2 items

Fuses or circuit breakers (inspect)

Engine

Factory

Factory: Periodic maintenance schedule (p.107): every 6 months, 3,000 mi or 5,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Battery (inspect, charge)

Ignition and electrics

Factory

Factory: Periodic maintenance schedule (p.107): every 6 months, 3,000 mi or 5,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.

Every 5,000 km or 12 months

12 items

Engine oil and oil filter (replace)

Engine

Factory

Factory: Periodic maintenance schedule (p.106): replace every 12 months, 3,000 mi or 5,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Oil strainer (clean)

Engine

Factory

Factory: Periodic maintenance schedule (p.106): clean every 12 months, 3,000 mi or 5,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Check throttle cable(s) free play and return

Fuel and air

Guideline
Clean drive chain thoroughly (remove and soak, re-lube)

Final drive

Guideline

Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.
Inspect chain and sprockets for wear (measure stretch)

Final drive

Guideline
Check steering head bearing adjustment

Front end

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline
Check brake pads and discs

Brakes

Guideline
Check wheel bearings for play

Wheels and tires

Guideline
Cables and wires (inspect)

Controls and cables

Factory

Factory: Periodic maintenance schedule (p.111): dealer: every 12 months, 3,000 mi or 5,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.

Every 5,000 km

1 item

Suspension system (inspect)

Engine

Factory

Factory: Periodic maintenance schedule (p.109): dealer: every 3,000 mi or 5,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.

Every 6,500 km or 12 months

2 items

Inspect, clean and gap spark plugs

Engine

Guideline
Adjust clutch free play, lubricate cable and lever pivot

Primary and gearbox

Guideline

Every 8,000 km or 12 months

2 items

Change engine oil

Engine

Guideline

Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.
Replace oil filter

Engine

Guideline

Every 9,500 km or 12 months

7 items

Inspect coolant hoses and clamps

Engine

Guideline
Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 10,000 km or 12 months

19 items

Bolts and nuts (inspect)

Engine

Factory

Factory: Periodic maintenance schedule (p.111): dealer: every 12 months, 6,000 mi or 10,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Coolant hoses (inspect)

Engine

Factory

Factory: Periodic maintenance schedule (p.110): dealer: every 12 months, 6,000 mi or 10,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Coolant level (inspect)

Engine

Factory

Factory: Periodic maintenance schedule (p.110): every 12 months, 6,000 mi or 10,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Diagnostic connector (read with diagnostic tool)

Engine

Factory

Factory: Periodic maintenance schedule (p.111): dealer: every 12 months, 6,000 mi or 10,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Electrical parts function (inspect)

Engine

Factory

Factory: Periodic maintenance schedule (p.107): dealer: every 12 months, 6,000 mi or 10,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Moving parts (lubricate, inspect)

Engine

Factory

Factory: Periodic maintenance schedule (p.111): dealer: every 12 months, 6,000 mi or 10,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Pipes, ducts, hoses and sleeves (inspect)

Engine

Factory

Factory: Periodic maintenance schedule (p.111): dealer: every 12 months, 6,000 mi or 10,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Radiator fan (inspect)

Engine

Factory

Factory: Periodic maintenance schedule (p.110): dealer: every 12 months, 6,000 mi or 10,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Wires (inspect damage, bending, routing)

Engine

Factory

Factory: Periodic maintenance schedule (p.107): dealer: every 12 months, 6,000 mi or 10,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Rear shock absorber and front forks (inspect for leaks)

Front end

Factory

Factory: Periodic maintenance schedule (p.109): dealer: every 12 months, 6,000 mi or 10,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Steering bearings (inspect)

Front end

Factory

Factory: Periodic maintenance schedule (p.109): dealer: every 12 months, 6,000 mi or 10,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Brake discs (inspect)

Brakes

Factory

Factory: Periodic maintenance schedule (p.108): dealer: every 12 months, 6,000 mi or 10,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Brake fluid level (inspect)

Brakes

Factory

Factory: Periodic maintenance schedule (p.108): every 12 months, 6,000 mi or 10,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Brake hoses (inspect damage and sealing)

Brakes

Factory

Factory: Periodic maintenance schedule (p.108): dealer: every 12 months, 6,000 mi or 10,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Brake lever free play (inspect)

Brakes

Factory

Factory: Periodic maintenance schedule (p.108): every 12 months, 6,000 mi or 10,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Brake pads (inspect)

Brakes

Factory

Factory: Periodic maintenance schedule (p.108): every 12 months, 6,000 mi or 10,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Front and rear brake system (inspect)

Brakes

Factory

Factory: Periodic maintenance schedule (p.108): dealer: every 12 months, 6,000 mi or 10,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Tire condition (inspect)

Wheels and tires

Factory

Factory: Periodic maintenance schedule (p.107): every 12 months, 6,000 mi or 10,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Tire pressure (inspect)

Wheels and tires

Factory

Factory: Periodic maintenance schedule (p.107): every 12 months, 6,000 mi or 10,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.

Every 10,000 km

3 items

Chain guard (inspect)

Final drive

Factory

Factory: Periodic maintenance schedule (p.110): dealer: every 10,000 km (the miles cell is printed "12M"). The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Chain, rear sprocket and engine sprocket wear (inspect)

Final drive

Factory

Factory: Periodic maintenance schedule (p.110): dealer: every 10,000 km (the miles cell is printed "12M"). The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Wheel bearings (inspect)

Wheels and tires

Factory

Factory: Periodic maintenance schedule (p.107): dealer: every 6,000 mi or 10,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.

Every 15,000 km or 12 months

2 items

Coolant (inspect)

Engine

Factory

Factory: Periodic maintenance schedule (p.106): dealer: inspect every 12 months, 9,000 mi or 15,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Air filter element (replace)

Fuel and air

Factory

Factory: Periodic maintenance schedule (p.106): dealer: replace every 12 months, 9,000 mi or 15,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.

Every 15,000 km

4 items

Idle (inspect)

Engine

Factory

Factory: Periodic maintenance schedule (p.106): inspect every 9,000 mi or 15,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Throttle system (inspect)

Engine

Factory

Factory: Periodic maintenance schedule (p.106): dealer: inspect, service or replace if necessary every 9,000 mi or 15,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Throttle valve (clean)

Engine

Factory

Factory: Periodic maintenance schedule (p.106): clean every 9,000 mi or 15,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Clutch (inspect)

Primary and gearbox

Factory

Factory: Periodic maintenance schedule (p.106): dealer: inspect, service or replace if necessary every 9,000 mi or 15,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.

Every 16,000 km or 2 years

1 item

Compression test (or leak-down)

Engine

Guideline

Every 19,500 km or 2 years

4 items

Replace air filter element

Fuel and air

Guideline
Synchronize throttle bodies

Fuel and air

Guideline
Clean and grease rear suspension linkage

Rear suspension and frame

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 24,000 km or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 24,000 km or 4 years

1 item

Check valve clearances (shim adjusted)

Engine

Guideline

Every 25,500 km or 4 years

1 item

Replace spark plugs

Engine

Guideline

Every 29,000 km

1 item

Replace chain and sprockets (wear based)

Final drive

Guideline

Every 30,000 km

3 items

Spark plug (replace)

Engine

Factory

Factory: Periodic maintenance schedule (p.106): replace every 18,000 mi or 30,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Valve clearance (inspect)

Engine

Factory

Factory: Periodic maintenance schedule (p.106): dealer: inspect every 18,000 mi or 30,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Frame (inspect)

Rear suspension and frame

Factory

Factory: Periodic maintenance schedule (p.109): dealer: every 18,000 mi or 30,000 km. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.

Every 32,000 km or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 38,500 km or 4 years

1 item

Replace fuel filter

Fuel and air

Guideline

Every 40,000 km or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 48,500 km or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

5 items

Replace coolant

Engine

Guideline
Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Brake fluid (replace)

Brakes

Factory

Factory: Periodic maintenance schedule (p.108): dealer: replace every 24 months. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Replace brake fluid

Brakes

Guideline

Every 4 years

4 items

Coolant (replace)

Engine

Factory

Factory: Periodic maintenance schedule (p.106): replace every 48 months. The table gives each item an interval in months, miles and km; service at whichever comes first, and shorten intervals by 50% when the motorcycle is used hard. Items marked with a square should be done by an authorized dealer.
Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.