MotoService Log
No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

Chang Jiang · Shim-adjusted overhead-cam four-stroke twin, wet sump, separate gearbox oil, shaft drive

Siberian Express 750

Library entry covers 2024-2026

45 factory 52 guideline

Published source

Changjiang Siberian Express 750 Manual, regular inspection and replacement tables printed pp.68-79 (ManualsLib viewer pp.69-80)

Factory source. Covers Changjiang Siberian Express 750 manual (ManualsLib title; names factory codes CJ700B-A, CJ700B-2, CJ700B-6), no year printed.

97 items for a 2024 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)
Engine cycle
Four-stroke
Engine lubrication
Wet sump (oil in crankcase)
Oil filtration
Replaceable cartridge or spin-on filter
Valve gear
Overhead cam, shim adjusted (incl. desmo)
Ignition
Electronic (CDI / transistor / ECU)
Charging
Alternator / stator with rectifier
Battery
Wet cell (flooded lead-acid, needs topping up)
Fuel system
Fuel injection
Cooling
Liquid cooled
Primary drive
Gear or chain inside engine, shares engine oil
Gearbox oil
Separate gearbox oil
Clutch control
Hand lever, cable
Final drive
Shaft
Front suspension
Telescopic fork
Rear suspension
Swingarm, twin shocks
Front brake
Disc, hydraulic
Rear brake
Disc, hydraulic
Wheels
Cast / alloy, tubeless
Sidecar
Sidecar fitted
Maintenance schedule

2024 Chang Jiang Siberian Express 750

On the road: every 200 mi

1 item
  • Check engine oil level
    Pre-ride / on the road
    Guideline

    Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 300 mi

2 items
  • Check lights, horn, brake light switches
    Pre-ride / on the road
    Guideline
  • Check tire pressures
    Pre-ride / on the road
    Guideline

On the road: every 500 mi

1 item
  • Check coolant level
    Pre-ride / on the road
    Guideline

Every 373 mi

1 item
  • Drive chain (lubricate)
    Final drive
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every 600 km (#). Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

Every 621 mi

1 item
  • Drive chain tension (inspect)
    Final drive
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every 1,000 km (#). Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

Every 1,000 mi or 6 months

2 items
  • Inspect tire tread, sidewalls and date codes
    Wheels and tires
    Guideline
  • Check sidecar mounts and clamps for tightness and cracks
    Sidecar
    Guideline

Every 1,864 mi or 6 months

1 item
  • Engine oil (replace)
    Engine
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every half year or every 3,000 km; first at 500 km (#). Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

Every 2,000 mi or 12 months

1 item
  • Adjust sidecar brake (if fitted)
    Sidecar
    Guideline

Every 3,000 mi or 12 months

8 items
  • Check throttle cable(s) free play and return
    Fuel and air
    Guideline
  • Check steering head bearing adjustment
    Front end
    Guideline
  • Inspect fork seals, stanchions and fork boots
    Front end
    Guideline
  • Check footrests, pegs, rear brake and gear lever pivots
    Rear suspension and frame
    Guideline
  • Grease and check center / side stand and springs
    Rear suspension and frame
    Guideline
  • Check brake pads and discs
    Brakes
    Guideline
  • Check wheel bearings for play
    Wheels and tires
    Guideline
  • Check sidecar alignment (toe-in and lean-out)
    Sidecar
    Guideline

Every 3,728 mi or 6 months

2 items
  • Oil filter (replace)
    Engine
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every half year or every 6,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Brake fluid level (inspect)
    Brakes
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every 6 months; at 1,000 km and every 6,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

Every 3,728 mi or 12 months

3 items
  • Brake fluid leaks and brake pipe damage (inspect)
    Brakes
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every year; at 1,000 km and every 6,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Brake operation (inspect)
    Brakes
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every year; at 1,000 km and every 6,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Brake pipe installation (inspect)
    Brakes
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every year; at 1,000 km and every 6,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

Every 3,728 mi

4 items
  • Throttle valve body (clean)
    Engine
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every 6,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Fuel evaporation system (inspect)
    Fuel and air
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): one mark at 6,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Brake light switch (inspect)
    Brakes
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): at 1,000 km and every 6,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Brake pad wear (inspect)
    Brakes
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every 6,000 km (#). Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

Every 4,000 mi or 12 months

2 items
  • Inspect, clean and gap spark plugs
    Engine
    Guideline
  • Adjust clutch free play, lubricate cable and lever pivot
    Primary and gearbox
    Guideline

Every 5,000 mi or 12 months

2 items
  • Change engine oil
    Engine
    Guideline

    Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.

  • Replace oil filter
    Engine
    Guideline

Every 6,000 mi or 12 months

8 items
  • Inspect coolant hoses and clamps
    Engine
    Guideline
  • Clean / inspect air filter
    Fuel and air
    Guideline

    Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.

  • Check charging voltage and regulator / cut-out
    Ignition and electrics
    Guideline
  • Check final drive for leaks and bearing play
    Final drive
    Guideline
  • Check swingarm bushes for play
    Rear suspension and frame
    Guideline
  • Inspect rear shocks for leaks and damping
    Rear suspension and frame
    Guideline
  • Lubricate control cables and lever pivots
    Controls and cables
    Guideline
  • Lubricate speedometer / tachometer cables, check drive
    Controls and cables
    Guideline

    A dry speedo cable whips the needle and eventually kills the instrument.

Every 6,000 mi or 2 years

1 item
  • Check / repack sidecar wheel bearing
    Sidecar
    Guideline

Every 7,456 mi or 12 months

13 items
  • Alarm system (inspect)
    Engine
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every year; every 12,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Bolt and nut torque (inspect)
    Engine
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every year; at 1,000 km and every 12,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Chassis components (lubricate)
    Engine
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every year; every 12,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Coolant level and leaks (inspect)
    Engine
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every year; at 1,000 km and every 12,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Engine stop switch (inspect)
    Engine
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every year; every 12,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Lights, switches and headlight aim (inspect)
    Engine
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every year; every 12,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Radiator and water pipes damage (inspect)
    Engine
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every year; at 1,000 km and every 12,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Throttle system clearance and return (inspect)
    Engine
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every year; at 1,000 km and every 12,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Fuel leaks, fuel pipe damage and installation (inspect)
    Fuel and air
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every year; at 1,000 km and every 12,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Fork and rear shock oil leaks (inspect)
    Front end
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every year; every 12,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Steering play (inspect)
    Front end
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every year; at 1,000 km and every 12,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Tire pressure (inspect)
    Wheels and tires
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every year; at 1,000 km and every 12,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Wheel bearings damage (inspect)
    Wheels and tires
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every year; every 12,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

Every 7,456 mi or 2 years

1 item
  • Steering bearing (lubricate)
    Front end
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every 2 years; every 12,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

Every 7,456 mi

11 items
  • Air intake system damage (inspect)
    Engine
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every 12,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Idle speed (inspect)
    Engine
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): at 1,000 km and every 12,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Pedals (lubricate)
    Engine
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): at 1,000 km and every 12,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Spark plugs (replace)
    Engine
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): at 12,000, 24,000, 36,000 and 48,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Sprocket carrier bearing (inspect)
    Engine
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every 12,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Sprocket carrier cush block (replace)
    Engine
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): at 12,000, 24,000, 36,000 and 48,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Air filter element (clean)
    Fuel and air
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): at 12,000, 24,000 and 36,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Clutch control (inspect)
    Primary and gearbox
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): at 1,000 km and every 12,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Drive chain and chain guard wear (inspect)
    Final drive
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every 12,000 km (#). Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Fork and rear shock action (inspect)
    Front end
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every 12,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Rims and tires, damage and wear (inspect)
    Wheels and tires
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every 12,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

Every 10,000 mi or 2 years

2 items
  • Compression test (or leak-down)
    Engine
    Guideline
  • Change gearbox oil
    Primary and gearbox
    Guideline

Every 12,000 mi or 2 years

4 items
  • Replace air filter element
    Fuel and air
    Guideline
  • Synchronize throttle bodies
    Fuel and air
    Guideline
  • Change final drive (rear drive) oil
    Final drive
    Guideline
  • Grease swingarm pivot
    Rear suspension and frame
    Guideline

Every 14,913 mi or 2 years

1 item
  • Brake fluid, front and rear (replace)
    Brakes
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every 2 years; at 24,000 and 48,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

Every 15,000 mi or 3 years

1 item
  • Change fork oil
    Front end
    Guideline

    Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 15,000 mi or 4 years

1 item
  • Check valve clearances (shim adjusted)
    Engine
    Guideline

Every 16,000 mi or 4 years

1 item
  • Replace spark plugs
    Engine
    Guideline

Every 20,000 mi or 4 years

3 items
  • Lubricate drive shaft splines / check U-joint
    Final drive
    Guideline
  • Repack / replace steering head bearings
    Front end
    Guideline

    Many old machines use loose balls in cups and cones. Taper roller conversions are common.

  • Repack / replace wheel bearings
    Wheels and tires
    Guideline

    Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 22,369 mi or 2 years

2 items
  • Coolant (replace)
    Engine
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every 2 years; at 36,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Radiator and water pipes (replace)
    Engine
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every 2 years; at 36,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

Every 24,000 mi or 4 years

1 item
  • Replace fuel filter
    Fuel and air
    Guideline

Every 25,000 mi or 6 years

1 item
  • Replace swingarm bushes / bearings
    Rear suspension and frame
    Guideline

Every 26,098 mi

1 item
  • Valve clearance (inspect)
    Engine
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every 42,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

Every 29,826 mi or 4 years

3 items
  • Fuel pipe (replace)
    Fuel and air
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every 4 years; at 48,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Brake hoses (replace)
    Brakes
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every 4 years; at 48,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Brake master cylinder rubber seals (replace)
    Brakes
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every 4 years; at 48,000 km. Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

Every 30,000 mi or 6 years

1 item
  • Rebuild forks: seals, bushes, springs
    Front end
    Guideline

Every 6 months

1 item
  • Clean battery terminals, check charge and strap
    Ignition and electrics
    Guideline

Every 2 years

5 items
  • Replace coolant
    Engine
    Guideline
  • Air filter element (replace)
    Fuel and air
    Factory

    Factory: Regular inspection and replacement tables (printed pp.68-79, ManualsLib viewer pp.69-80): every 2 years (#). Columns as printed: inspection at 1,000 km, then 6,000 km steps to 36,000 km; replacement at 1,000, 12,000, 24,000, 36,000 and 48,000 km; whichever comes first with the period column. Items marked # need a shorter period in dust, humidity, mud, high speed or frequent stop-start use.

  • Inspect wiring, bullet connectors and ground points
    Ignition and electrics
    Guideline
  • Inspect frame, welds and lugs for cracks
    Rear suspension and frame
    Guideline
  • Replace brake fluid
    Brakes
    Guideline

Every 4 years

3 items
  • Replace fuel lines
    Fuel and air
    Guideline

    Old rubber and modern ethanol fuel do not mix well.

  • Inspect brake hoses; replace old rubber
    Brakes
    Guideline
  • Rebuild calipers and master cylinders (seals)
    Brakes
    Guideline

Every 6 years

1 item
  • Replace tires on age (regardless of tread)
    Wheels and tires
    Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.

Keep up with this schedule on your phone

Add the bike in the app and this chart loads itself, ready to log against and edit.

Coming soon to Google Play

Other 2024 Chang Jiang models

All 2024 Chang Jiang
Chang Jiang CJ750 sidecar
1957-2026
CJ750 sidecar
Guideline
2017-2026
650 Dynasty / Pekin Express / 650 GT / CJ650 (CFMoto 650 twin)
Factory
2021-2026
CJ700 Dynasty 700 / Adept 700 / Bobbie (CFMoto 693 twin)
Guideline