No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

Ducati · Shim-adjusted overhead-cam four-stroke, wet sump, gearbox shares engine oil, chain drive

Panigale V2 (955 cc)

Library entry covers 2020-2025

42 factory 50 guideline

Published source

Ducati Panigale V2 2020 Owner's Manual, Scheduled maintenance chart pp.221-226 (manualsnet)

Factory source. Covers Ducati Panigale V2 2020 Owner's Manual (MY2020); other years of the 2020-2025 row not compared.

92 items for a 2022 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, shim adjusted (incl. desmo)
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Liquid cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Shares engine oil
Clutch control: Hand lever, cable
Final drive: Chain
Front suspension: Telescopic fork
Rear suspension: Swingarm, single shock / cantilever
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

2022 Ducati Panigale V2 (955 cc)

On the road: every 300 km

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

3 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline
Lubricate drive chain

Pre-ride / on the road

Guideline

Lube warm, ideally at the end of the riding day so it soaks in overnight. Sooner after rain.

On the road: every 800 km

1 item

Check coolant level

Pre-ride / on the road

Guideline

On the road: every 1,000 km

1 item

Check chain slack and rear wheel alignment

Pre-ride / on the road

Guideline

Every 1,000 km or 6 months

5 items

Owner check: engine oil level

Engine

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): every 1,000 km (600 mi) or 6 months (customer chart). Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Owner check: drive chain tension and lubrication

Final drive

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): every 1,000 km (600 mi) or 6 months (customer chart). Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Owner check: brake and clutch fluid level

Brakes

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): every 1,000 km (600 mi) or 6 months (customer chart). Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Owner check: brake pads

Brakes

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): every 1,000 km (600 mi) or 6 months (customer chart); contact the dealer to replace. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Owner check: tire pressure and wear

Wheels and tires

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): every 1,000 km (600 mi) or 6 months (customer chart). Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.

Every 1,600 km or 6 months

1 item

Inspect tire tread, sidewalls and date codes

Wheels and tires

Guideline

Every 5,000 km or 12 months

9 items

Check throttle cable(s) free play and return

Fuel and air

Guideline
Clean drive chain thoroughly (remove and soak, re-lube)

Final drive

Guideline

Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.
Inspect chain and sprockets for wear (measure stretch)

Final drive

Guideline
Check steering head bearing adjustment

Front end

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline
Check brake pads and discs

Brakes

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 6,500 km or 12 months

2 items

Inspect, clean and gap spark plugs

Engine

Guideline
Adjust clutch free play, lubricate cable and lever pivot

Primary and gearbox

Guideline

Every 8,000 km or 12 months

2 items

Change engine oil

Engine

Guideline

Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.
Replace oil filter

Engine

Guideline

Every 9,500 km or 12 months

7 items

Inspect coolant hoses and clamps

Engine

Guideline
Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 12,000 km or 12 months

21 items

Coolant level (visual check)

Engine

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): at 1,000 km (600 mi), then every 12,000 km (7,500 mi) or 12 months. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Engine oil and filter (change)

Engine

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): at 1,000 km (600 mi), then every 12,000 km (7,500 mi) or 12 months. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Final inspection and road test: safety devices such as ABS and DTC, idling

Engine

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): at 1,000 km (600 mi), then every 12,000 km (7,500 mi) or 12 months. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Motorcycle (clean gently)

Engine

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): at 1,000 km (600 mi), then every 12,000 km (7,500 mi) or 12 months. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Service booklet (record the service)

Engine

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): at 1,000 km (600 mi), then every 12,000 km (7,500 mi) or 12 months. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Service indication (reset through DDS 2.0)

Engine

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): at 1,000 km (600 mi), then every 12,000 km (7,500 mi) or 12 months. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Technical updates and recall campaigns (check)

Engine

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): at 1,000 km (600 mi), then every 12,000 km (7,500 mi) or 12 months. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Battery charge level (check)

Ignition and electrics

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): at 1,000 km (600 mi), then every 12,000 km (7,500 mi) or 12 months. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Final drive chain tension and lubrication (check)

Final drive

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): at 1,000 km (600 mi), then every 12,000 km (7,500 mi) or 12 months. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Final drive: chain, sprockets and sliding shoe wear; chain stretch (check)

Final drive

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): at 1,000 km (600 mi), then every 12,000 km (7,500 mi) or 12 months. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Front fork and rear shock absorber seals (visual check)

Front end

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): at 1,000 km (600 mi), then every 12,000 km (7,500 mi) or 12 months. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Side stand freedom of movement and tightening (check)

Rear suspension and frame

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): at 1,000 km (600 mi), then every 12,000 km (7,500 mi) or 12 months. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Brake and clutch fluid level (check)

Brakes

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): at 1,000 km (600 mi), then every 12,000 km (7,500 mi) or 12 months. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Brake pads (check wear; change if necessary)

Brakes

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): every 12,000 km (7,500 mi) or 12 months. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Electric safety devices: clutch and side stand sensors, brake switches, engine kill switch, gear/neutral sensor (check)

Brakes

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): at 1,000 km (600 mi), then every 12,000 km (7,500 mi) or 12 months. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Front and rear brake caliper bolts and front brake disc bolts (check tightening)

Brakes

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): every 12,000 km (7,500 mi) or 12 months. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Gaiters and flexible hoses: fuel, brake and clutch fluid, cooling, bleeding, drainage (check for cracks, sealing and position)

Brakes

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): at 1,000 km (600 mi), then every 12,000 km (7,500 mi) or 12 months. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Front and rear wheel nuts and rear sprocket nut (check tightening)

Wheels and tires

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): every 12,000 km (7,500 mi) or 12 months. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Tire pressure and wear (check)

Wheels and tires

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): at 1,000 km (600 mi), then every 12,000 km (7,500 mi) or 12 months. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Error memory (read with DDS 2.0) and control-unit software version (check)

Controls and cables

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): at 1,000 km (600 mi), then every 12,000 km (7,500 mi) or 12 months. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Lighting, turn indicators, horn and controls (check)

Controls and cables

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): at 1,000 km (600 mi), then every 12,000 km (7,500 mi) or 12 months. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.

Every 12,000 km

1 item

Frame-to-engine fasteners and swingarm (check tightening)

Rear suspension and frame

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): every 12,000 km (7,500 mi) or 12 months. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.

Every 16,000 km or 2 years

1 item

Compression test (or leak-down)

Engine

Guideline

Every 19,500 km or 2 years

4 items

Replace air filter element

Fuel and air

Guideline
Synchronize throttle bodies

Fuel and air

Guideline
Clean and grease rear suspension linkage

Rear suspension and frame

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 24,000 km or 2 years

1 item

Steering tube bearing play (check)

Front end

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): every 24,000 km (15,000 mi) or 24 months. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.

Every 24,000 km or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 24,000 km or 4 years

1 item

Check valve clearances (shim adjusted)

Engine

Guideline

Every 24,000 km

10 items

Cush drive damper on rear sprocket (check)

Engine

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): every 24,000 km (15,000 mi). Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Engine oil mesh filter assembly (change)

Engine

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): every 24,000 km (15,000 mi). Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Secondary air reeds (check; replace if necessary)

Engine

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): every 24,000 km (15,000 mi). Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Spark plugs (change)

Engine

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): every 24,000 km (15,000 mi). Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Valve clearance (check and adjust)

Engine

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): every 24,000 km (15,000 mi). Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Air filter (change)

Fuel and air

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): every 24,000 km (15,000 mi). Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Air filter (check and clean)

Fuel and air

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): at 12,000 km (7,500 mi) and 36,000 km (22,500 mi), between the changes. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Rear brake disc and phonic wheel bolts (check tightening)

Brakes

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): every 24,000 km (15,000 mi). Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Front and rear wheel hub bearings (check)

Wheels and tires

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): every 24,000 km (15,000 mi). Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Rear wheel shaft (check and lubricate)

Wheels and tires

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): every 24,000 km (15,000 mi). Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.

Every 25,500 km or 4 years

1 item

Replace spark plugs

Engine

Guideline

Every 29,000 km

1 item

Replace chain and sprockets (wear based)

Final drive

Guideline

Every 32,000 km or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 38,500 km or 4 years

1 item

Replace fuel filter

Fuel and air

Guideline

Every 40,000 km or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 48,000 km or 4 years

1 item

Coolant (change)

Engine

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): every 48,000 km (30,000 mi) or 48 months. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.

Every 48,500 km or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

5 items

Replace coolant

Engine

Guideline
Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Brake and clutch fluid (change)

Brakes

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): every 24 months. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.
Replace brake fluid

Brakes

Guideline

Every 3 years

1 item

Front fork fluid (change)

Front end

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): every 36 months. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.

Every 4 years

3 items

Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

No interval set

1 item

Electric fans switching on and off (check for interference)

Engine

Factory

Factory: Scheduled maintenance chart (manual pp.221-226, manualsnet viewer pp.222-227): listed in the chart with no interval marked. Dealer chart columns as printed: 1,000 km (600 mi), 12,000 km (7,500 mi), 24,000 km (15,000 mi), 36,000 km (22,500 mi), 48,000 km (30,000 mi), plus a time column in months; whichever comes first. Chart is for road use; track use calls for more frequent service.

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.