No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

E-Ton · Two-stroke single, oil injection, CVT belt drive

Matrix 50

Library entry covers 2010

24 factory 47 guideline

Published source

E-TON MATRIX 50 Owner's Manual, Maintenance Schedule p.16 (ManualsLib viewer p.17)

71 items for a 2010 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Two-stroke
Engine lubrication: Two-stroke oil injection (Autolube, Injectolube, Pilgrim pump...)
Oil filtration: None (no filter)
Valve gear: None (two-stroke porting)
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Single carburetor
Cooling: Air / oil cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Separate gearbox oil
Clutch control: Automatic or semi-automatic
Final drive: Belt CVT, scooter automatic
Front suspension: Telescopic fork
Rear suspension: Swingarm, twin shocks
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Spoked, tubed
Sidecar: No sidecar

Maintenance schedule

2010 E-Ton Matrix 50

On the road: every 200 km

1 item

Check two-stroke oil tank / carry premix oil

Pre-ride / on the road

Guideline

Running a two-stroke out of oil seizes it. Injection bikes: check the tank. Premix: carry oil and a measure.

On the road: every 500 km

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

Every 1,600 km or 6 months

1 item

Inspect tire tread, sidewalls and date codes

Wheels and tires

Guideline

Every 3,000 km or 12 months

1 item

Replace spark plugs (two-stroke)

Engine

Guideline

Every 5,000 km or 12 months

10 items

Check throttle cable(s) free play and return

Fuel and air

Guideline
Clean fuel tap filter / sediment bowl

Fuel and air

Guideline
Adjust automatic / semi-automatic clutch

Primary and gearbox

Guideline
Check steering head bearing adjustment

Front end

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline
Check brake pads and discs

Brakes

Guideline
Check spoke tension and wheel true

Wheels and tires

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 5,000 km or 2 years

1 item

Decarbonize exhaust ports, pipes and baffles

Engine

Guideline

Two-strokes coke up the exhaust port and muffler baffles; power falls off gradually.

Every 6,500 km or 12 months

3 items

Check / bleed / adjust oil injection pump cable

Engine

Guideline
Inspect, clean and gap spark plugs

Engine

Guideline
Inspect CVT drive belt, rollers / sliders and clutch shoes

Final drive

Guideline

Typical scooter interval. Your owner's manual figure governs; check belt width against the service limit.

Every 9,500 km or 12 months

7 items

Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Clean carburetor float bowl(s), check float level and jets

Fuel and air

Guideline

Ethanol fuel varnishes old carbs quickly in storage.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 16,000 km or 2 years

2 items

Compression test (or leak-down)

Engine

Guideline
Change gearbox oil

Primary and gearbox

Guideline

Every 16,093 km or 12 months

1 item

Transmission oil (replace)

Primary and gearbox

Factory

Factory: Maintenance Schedule (owner's manual p.16, ManualsLib viewer p.17): every year; replace every 10,000 miles (notes). Columns as printed: first week, every 30 days, every year, notes. Key: I inspect, clean, adjust, lubricate or replace as needed; C clean; L lubricate; R replace.

Every 19,500 km or 2 years

2 items

Replace air filter element

Fuel and air

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 19,500 km or 3 years

1 item

Replace CVT drive belt

Final drive

Guideline

Typical scooter interval, or sooner if the belt is cracked, glazed or below its width limit.

Every 24,000 km or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 25,500 km or 4 years

1 item

Replace spark plugs

Engine

Guideline

Every 32,000 km or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 40,000 km or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 48,500 km or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 100 h

1 item

Spark arrester (clean)

Engine

Factory

Factory: Maintenance Schedule (owner's manual p.16, ManualsLib viewer p.17): every 100 hours. Columns as printed: first week, every 30 days, every year, notes. Key: I inspect, clean, adjust, lubricate or replace as needed; C clean; L lubricate; R replace.

Every 200 h

1 item

Spark arrester (replace)

Engine

Factory

Factory: Maintenance Schedule (owner's manual p.16, ManualsLib viewer p.17): every 200 hours (notes). Columns as printed: first week, every 30 days, every year, notes. Key: I inspect, clean, adjust, lubricate or replace as needed; C clean; L lubricate; R replace.

Every 1 month

10 items

Bolts, nuts and fasteners (inspect)

Engine

Factory

Factory: Maintenance Schedule (owner's manual p.16, ManualsLib viewer p.17): first week and every 30 days; also part of the pre-ride inspection. Columns as printed: first week, every 30 days, every year, notes. Key: I inspect, clean, adjust, lubricate or replace as needed; C clean; L lubricate; R replace.
CVT filter (clean)

Engine

Factory

Factory: Maintenance Schedule (owner's manual p.16, ManualsLib viewer p.17): every 30 days. Columns as printed: first week, every 30 days, every year, notes. Key: I inspect, clean, adjust, lubricate or replace as needed; C clean; L lubricate; R replace.
Choke (inspect)

Engine

Factory

Factory: Maintenance Schedule (owner's manual p.16, ManualsLib viewer p.17): every 30 days. Columns as printed: first week, every 30 days, every year, notes. Key: I inspect, clean, adjust, lubricate or replace as needed; C clean; L lubricate; R replace.
Spark plug (inspect)

Engine

Factory

Factory: Maintenance Schedule (owner's manual p.16, ManualsLib viewer p.17): every 30 days. Columns as printed: first week, every 30 days, every year, notes. Key: I inspect, clean, adjust, lubricate or replace as needed; C clean; L lubricate; R replace.
Throttle operation (inspect)

Engine

Factory

Factory: Maintenance Schedule (owner's manual p.16, ManualsLib viewer p.17): first week and every 30 days; also part of the pre-ride inspection. Columns as printed: first week, every 30 days, every year, notes. Key: I inspect, clean, adjust, lubricate or replace as needed; C clean; L lubricate; R replace.
Air filter (clean)

Fuel and air

Factory

Factory: Maintenance Schedule (owner's manual p.16, ManualsLib viewer p.17): every 30 days. Columns as printed: first week, every 30 days, every year, notes. Key: I inspect, clean, adjust, lubricate or replace as needed; C clean; L lubricate; R replace.
Drive chain (inspect and lubricate)

Final drive

Factory

Factory: Maintenance Schedule (owner's manual p.16, ManualsLib viewer p.17): first week and every 30 days. Columns as printed: first week, every 30 days, every year, notes. Key: I inspect, clean, adjust, lubricate or replace as needed; C clean; L lubricate; R replace.
Brake shoes (inspect)

Brakes

Factory

Factory: Maintenance Schedule (owner's manual p.16, ManualsLib viewer p.17): every 30 days and every year. Columns as printed: first week, every 30 days, every year, notes. Key: I inspect, clean, adjust, lubricate or replace as needed; C clean; L lubricate; R replace.
Brake system (inspect)

Brakes

Factory

Factory: Maintenance Schedule (owner's manual p.16, ManualsLib viewer p.17): first week and every 30 days; also part of the pre-ride inspection. Columns as printed: first week, every 30 days, every year, notes. Key: I inspect, clean, adjust, lubricate or replace as needed; C clean; L lubricate; R replace.
Wheels (inspect)

Wheels and tires

Factory

Factory: Maintenance Schedule (owner's manual p.16, ManualsLib viewer p.17): first week and every 30 days; also part of the pre-ride inspection. Columns as printed: first week, every 30 days, every year, notes. Key: I inspect, clean, adjust, lubricate or replace as needed; C clean; L lubricate; R replace.

Every 6 months

2 items

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline
Steering system (inspect)

Front end

Factory

Factory: Maintenance Schedule (owner's manual p.16, ManualsLib viewer p.17): every 6 months (printed in the every-year column); also part of the pre-ride inspection. Columns as printed: first week, every 30 days, every year, notes. Key: I inspect, clean, adjust, lubricate or replace as needed; C clean; L lubricate; R replace.

Every 12 months

7 items

CVT drive belt (inspect)

Engine

Factory

Factory: Maintenance Schedule (owner's manual p.16, ManualsLib viewer p.17): every year; replace as needed. Columns as printed: first week, every 30 days, every year, notes. Key: I inspect, clean, adjust, lubricate or replace as needed; C clean; L lubricate; R replace.
Spark plug (replace)

Engine

Factory

Factory: Maintenance Schedule (owner's manual p.16, ManualsLib viewer p.17): every year. Columns as printed: first week, every 30 days, every year, notes. Key: I inspect, clean, adjust, lubricate or replace as needed; C clean; L lubricate; R replace.
Suspension system (inspect)

Engine

Factory

Factory: Maintenance Schedule (owner's manual p.16, ManualsLib viewer p.17): every year. Columns as printed: first week, every 30 days, every year, notes. Key: I inspect, clean, adjust, lubricate or replace as needed; C clean; L lubricate; R replace.
Air filter (replace)

Fuel and air

Factory

Factory: Maintenance Schedule (owner's manual p.16, ManualsLib viewer p.17): every year. Columns as printed: first week, every 30 days, every year, notes. Key: I inspect, clean, adjust, lubricate or replace as needed; C clean; L lubricate; R replace.
Fuel filter (replace)

Fuel and air

Factory

Factory: Maintenance Schedule (owner's manual p.16, ManualsLib viewer p.17): every year. Columns as printed: first week, every 30 days, every year, notes. Key: I inspect, clean, adjust, lubricate or replace as needed; C clean; L lubricate; R replace.
Fuel lines (inspect)

Fuel and air

Factory

Factory: Maintenance Schedule (owner's manual p.16, ManualsLib viewer p.17): every year. Columns as printed: first week, every 30 days, every year, notes. Key: I inspect, clean, adjust, lubricate or replace as needed; C clean; L lubricate; R replace.
Battery (inspect and clean)

Ignition and electrics

Factory

Factory: Maintenance Schedule (owner's manual p.16, ManualsLib viewer p.17): every year. Columns as printed: first week, every 30 days, every year, notes. Key: I inspect, clean, adjust, lubricate or replace as needed; C clean; L lubricate; R replace.

Every 2 years

5 items

Fuel and vent lines (replace)

Fuel and air

Factory

Factory: Maintenance Schedule (owner's manual p.16, ManualsLib viewer p.17): every 2 years (notes). Columns as printed: first week, every 30 days, every year, notes. Key: I inspect, clean, adjust, lubricate or replace as needed; C clean; L lubricate; R replace.
Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Brake fluid (replace)

Brakes

Factory

Factory: Maintenance Schedule (owner's manual p.16, ManualsLib viewer p.17): every 2 years (notes). Columns as printed: first week, every 30 days, every year, notes. Key: I inspect, clean, adjust, lubricate or replace as needed; C clean; L lubricate; R replace.
Replace brake fluid

Brakes

Guideline

Every 4 years

4 items

Replace oil injection delivery lines

Engine

Guideline
Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

2 items

Replace inner tubes and rim tape with tires

Wheels and tires

Guideline
Replace tires on age (regardless of tread)

Wheels and tires

Guideline

No interval set

1 item

Brake fluid (inspect)

Brakes

Factory

Factory: Maintenance Schedule (owner's manual p.16, ManualsLib viewer p.17): first week; also part of the pre-ride inspection. Columns as printed: first week, every 30 days, every year, notes. Key: I inspect, clean, adjust, lubricate or replace as needed; C clean; L lubricate; R replace.

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.