XE 125

Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.

Two-strokes coke up the exhaust port and muffler baffles; power falls off gradually.

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.

Ethanol fuel varnishes old carbs quickly in storage.

A dry speedo cable whips the needle and eventually kills the instrument.

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Many old machines use loose balls in cups and cones. Taper roller conversions are common.

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Factory: Maintenance table, XE 125 amateur version (p.46): check coolant level and leakage after break-in and every 10 hours; inspect hoses every 10 hours; check radiator cap operation as required. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.46): inspect and clean after break-in and every 10 hours; replace as required. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.46): after break-in and every 10 hours. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.46): after break-in and every 10 hours; clean every 20 hours; replace fiber as required. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.46): after break-in and every 10 hours. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.46): inspect and clean after break-in and every 10 hours. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.46): inspect every 10 hours; replace as required. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.46): inspect after break-in and every 10 hours. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.46): after break-in and every 10 hours; replace as required. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.46): after break-in and every 10 hours. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.46): clean and lubricate after break-in and every 10 hours; replace as required. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.46): after break-in and every 10 hours. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.46): after break-in and every 10 hours. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.46): inspect and adjust after break-in and every 10 hours; replace as required. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.46): after break-in and every 10 hours; replace as required. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.47): inspect after break-in and every 10 hours. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.47): clean and lube after break-in and every 10 hours. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.47): inspect and adjust after break-in and every 10 hours; replace oil after break-in. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.47): inspect free play and retighten after break-in and every 10 hours; replace bearing as required. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.46): after break-in and every 10 hours. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.47): inspect, adjust and retighten after break-in and every 10 hours; lube every 10 hours and after riding in rain. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.47): after break-in and every 10 hours. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.47): adjust lever position and pedal height, lubricate pivot point, check disc surface, check fluid level and leakage, retighten disc, caliper, master cylinder and union bolts after break-in and every 10 hours; replace pads as required. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.47): inspect air pressure, wheel runout, tire wear and spoke looseness and retighten the sprocket bolt after break-in and every 10 hours; inspect or replace bearings and lubricate every 10 hours; replace bearings as required. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.47): check routing and connection and lubricate after break-in and every 10 hours. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.46): inspect and clean every 20 hours and as required. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.46): clean every 20 hours. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.46): replace every 20 hours and as required. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.46): retighten after break-in and every 20 hours. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.46): replace oil after break-in and every 20 hours; inspect or replace bearing as required. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.47): replace oil after break-in and every 20 hours; replace oil seal as required. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.47): clean and lube every 20 hours. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.47): replace brake fluid every one year. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.46): replace coolant every two years. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Old rubber and modern ethanol fuel do not mix well.

Factory: Maintenance table, XE 125 amateur version (p.46): replace as required. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.47): replace as required. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.

Factory: Maintenance table, XE 125 amateur version (p.46): inspect as required. Columns: after break-in, every 10 hours, every 20 hours, as required. Weather, terrain, location and use change the intervals; check earlier in rain or dirt. Timely service with documentation is needed for the warranty.