
Imola 125
Library entry covers 2024
Published source
Mondial Imola 125 CBS owner's manual, scheduled maintenance table English section pp.66-68 (ManualsLib.mx viewer pp.68-70)
Factory source. Covers Mondial IMOLA 125 CBS owner's manual (ManualsLib.mx title; multilingual, English section), no year printed on the pages read.
76 items for a 2024 model, grouped by interval the way a factory chart is laid out.
How this bike is built (what the schedule is based on)
- Engine cycle
- Four-stroke
- Engine lubrication
- Wet sump (oil in crankcase)
- Oil filtration
- Replaceable cartridge or spin-on filter
- Valve gear
- Overhead cam, screw/locknut adjusters
- Ignition
- Electronic (CDI / transistor / ECU)
- Charging
- Alternator / stator with rectifier
- Battery
- Wet cell (flooded lead-acid, needs topping up)
- Fuel system
- Fuel injection
- Cooling
- Air / oil cooled
- Primary drive
- Gear or chain inside engine, shares engine oil
- Gearbox oil
- Shares engine oil
- Clutch control
- Automatic or semi-automatic
- Final drive
- Belt CVT, scooter automatic
- Front suspension
- Telescopic fork
- Rear suspension
- Swingarm, twin shocks
- Front brake
- Disc, hydraulic
- Rear brake
- Disc, hydraulic
- Wheels
- Cast / alloy, tubeless
- Sidecar
- No sidecar
2024 FB Mondial Imola 125
On the road: every 200 mi
1 item-
Check engine oil levelPre-ride / on the roadGuideline
Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.
On the road: every 300 mi
2 items-
Check lights, horn, brake light switchesPre-ride / on the roadGuideline
-
Check tire pressuresPre-ride / on the roadGuideline
Every 1,000 mi or 6 months
1 item-
Inspect tire tread, sidewalls and date codesWheels and tiresGuideline
Every 3,000 mi or 12 months
8 items-
Check throttle cable(s) free play and returnFuel and airGuideline
-
Adjust automatic / semi-automatic clutchPrimary and gearboxGuideline
-
Check steering head bearing adjustmentFront endGuideline
-
Inspect fork seals, stanchions and fork bootsFront endGuideline
-
Check footrests, pegs, rear brake and gear lever pivotsRear suspension and frameGuideline
-
Grease and check center / side stand and springsRear suspension and frameGuideline
-
Check brake pads and discsBrakesGuideline
-
Check wheel bearings for playWheels and tiresGuideline
Every 3,107 mi or 6 months
22 items-
All part bolts (check tightness)EngineFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): I before each trip, at 1,000 km and every 5,000 km. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Body parts (lubricate)EngineFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): L before each trip, at 1,000 km and every 5,000 km. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Compression (check)EngineFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): I every 5,000 km. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Crankcase leaks and ventilation (check)EngineFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): I at 1,000 km and every 5,000 km or 6 months. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Engine oil (replace)EngineFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): A (replace) at 1,000 km and every 5,000 km; check before each trip. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Exhaust system (check)EngineFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): I before each trip, at 1,000 km and every 5,000 km. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Idle exhaust gas (check)EngineFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): I at 1,000 km and every 5,000 km or 6 months. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Lighting, instruments and electrical equipment (check)EngineFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): I before each trip, at 1,000 km and every 5,000 km. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Spark plug (check)EngineFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): I before each trip, at 1,000 km and every 5,000 km. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Throttle (check)EngineFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): I before each trip, at 1,000 km and every 5,000 km. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
V-belt (inspect)EngineFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): I at 5,000, 15,000 and 25,000 km. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Air filter element (clean)Fuel and airFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): R (clean) at 5,000, 10,000, 20,000 and 25,000 km. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Fuel line (check)Fuel and airFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): I before each trip, at 1,000 km and every 5,000 km. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Battery (check)Ignition and electricsFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): I at 1,000 km and every 5,000 km or 6 months. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Ignition timing (check)Ignition and electricsFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): I at 1,000 km and every 5,000 km or 6 months. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Final transmission oil (replace)Primary and gearboxFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): A (replace) at 1,000 km and every 5,000 km. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Transmission (check for leaks)Primary and gearboxFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): I before each trip, at 1,000 km and every 5,000 km. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Steering and bearings (check)Front endFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): I before each trip, at 1,000 km and every 5,000 km. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Center and side stands (check)Rear suspension and frameFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): I before each trip, at 1,000 km and every 5,000 km. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Brake hose (check)BrakesFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): I before each trip, at 1,000 km and every 5,000 km. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Front and rear brakes (check)BrakesFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): I before each trip, at 1,000 km and every 5,000 km. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Tire pressure (check)Wheels and tiresFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): I at 1,000 km and every 5,000 km or 6 months. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
Every 4,000 mi or 12 months
2 items-
Inspect, clean and gap spark plugsEngineGuideline
-
Inspect CVT drive belt, rollers / sliders and clutch shoesFinal driveGuideline
Typical scooter interval. Your owner's manual figure governs; check belt width against the service limit.
Every 5,000 mi or 12 months
2 items-
Change engine oilEngineGuideline
Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.
-
Replace oil filterEngineGuideline
Every 6,000 mi or 12 months
6 items-
Clean / inspect air filterFuel and airGuideline
Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
-
Check charging voltage and regulator / cut-outIgnition and electricsGuideline
-
Check swingarm bushes for playRear suspension and frameGuideline
-
Inspect rear shocks for leaks and dampingRear suspension and frameGuideline
-
Lubricate control cables and lever pivotsControls and cablesGuideline
-
Lubricate speedometer / tachometer cables, check driveControls and cablesGuideline
A dry speedo cable whips the needle and eventually kills the instrument.
Every 6,214 mi or 12 months
6 items-
Engine bolt torque (check)EngineFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): I at 10,000, 20,000 and 30,000 km. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
V-belt (replace)EngineFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): I/A at 10,000, 20,000 and 30,000 km. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Valve clearance (check)EngineFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): I at 1,000 km and every 10,000 km. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Front fork function and oil leaks (check)Front endFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): I before each trip, at 1,000 km and every 10,000 km. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Rear shock absorber function and oil leaks (check)Rear suspension and frameFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): I before each trip, at 1,000 km and every 10,000 km. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Brake pad linings (replace if necessary)BrakesFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): I/A at 10,000, 20,000 and 30,000 km. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
Every 8,000 mi or 2 years
1 item-
Check and adjust valve clearancesEngineGuideline
Every 9,321 mi or 18 months
4 items-
Oil filter net (clean)EngineFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): R at 5,000 and 20,000 km. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Spark plug (replace)EngineFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): A at 15,000 and 30,000 km. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Air filter element (replace)Fuel and airFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): A (replace) at 15,000 and 30,000 km. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Fuel filter (replace)Fuel and airFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): A (replace) at 15,000 and 30,000 km; I at the earlier services. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
Every 10,000 mi or 2 years
1 item-
Compression test (or leak-down)EngineGuideline
Every 12,000 mi or 2 years
3 items-
Replace air filter elementFuel and airGuideline
-
Synchronize throttle bodiesFuel and airGuideline
-
Grease swingarm pivotRear suspension and frameGuideline
Every 12,000 mi or 3 years
1 item-
Replace CVT drive beltFinal driveGuideline
Typical scooter interval, or sooner if the belt is cracked, glazed or below its width limit.
Every 15,000 mi or 3 years
1 item-
Change fork oilFront endGuideline
Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.
Every 16,000 mi or 4 years
1 item-
Replace spark plugsEngineGuideline
Every 20,000 mi or 4 years
2 items-
Repack / replace steering head bearingsFront endGuideline
Many old machines use loose balls in cups and cones. Taper roller conversions are common.
-
Repack / replace wheel bearingsWheels and tiresGuideline
Cup-and-cone and taper roller hubs need periodic repacking and adjustment.
Every 24,000 mi or 4 years
1 item-
Replace fuel filterFuel and airGuideline
Every 25,000 mi or 6 years
1 item-
Replace swingarm bushes / bearingsRear suspension and frameGuideline
Every 30,000 mi or 6 years
1 item-
Rebuild forks: seals, bushes, springsFront endGuideline
Every 6 months
1 item-
Clean battery terminals, check charge and strapIgnition and electricsGuideline
Every 2 years
3 items-
Inspect wiring, bullet connectors and ground pointsIgnition and electricsGuideline
-
Inspect frame, welds and lugs for cracksRear suspension and frameGuideline
-
Replace brake fluidBrakesGuideline
Every 4 years
4 items-
Replace fuel linesFuel and airGuideline
Old rubber and modern ethanol fuel do not mix well.
-
Brake hose (replace)BrakesFactory
Factory: Scheduled maintenance table (English section pp.66-68, ManualsLib viewer pp.68-70): each 4 years. Columns as printed: before each trip; 1,000 km or 1 month (1st service); 5,000 km or 6 months; then every 5,000 km or 6 months to 30,000 km or 36 months. After the warranty period inspect every 5,000 km or 6 months and every 10,000 km or 12 months. Key as printed: I inspect, clean and adjust; A replacement; R cleaning (replace if necessary); L lubricate; T tighten.
-
Inspect brake hoses; replace old rubberBrakesGuideline
-
Rebuild calipers and master cylinders (seals)BrakesGuideline
Every 6 years
1 item-
Replace tires on age (regardless of tread)Wheels and tiresGuideline
Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.
Keep up with this schedule on your phone
Add the bike in the app and this chart loads itself, ready to log against and edit.