No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

Genuine Scooter · Overhead-cam four-stroke single, wet sump, gearbox shares engine oil, CVT belt drive

Urbano 200i

Library entry covers 2025

33 factory 47 guideline

Published source

Genuine Scooter Co. Urbano 200i Owner's Manual, Periodic Maintenance pp.31-33 (genuinescooters.com)

Factory source. Covers Genuine Scooter Co. Urbano 200i owner's manual (official PDF; no model year printed).

80 items for a 2025 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, screw/locknut adjusters
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Air / oil cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Shares engine oil
Clutch control: Automatic or semi-automatic
Final drive: Belt CVT, scooter automatic
Front suspension: Telescopic fork
Rear suspension: Swingarm, single shock / cantilever
Front brake: Disc, hydraulic
Rear brake: Drum (or band / belt rim)
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

2025 Genuine Scooter Urbano 200i

On the road: every 200 mi

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 300 mi

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

Every 1,000 mi or 6 months

2 items

Adjust rear drum brake and rod / cable linkage

Brakes

Guideline
Inspect tire tread, sidewalls and date codes

Wheels and tires

Guideline

Every 2,485 mi or 6 months

22 items

Chassis bolts and nuts (inspect)

Engine

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): after 800 km, then every 4,000 km or 6 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Crankcase leakage and crankcase ventilation hoses (inspect)

Engine

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): after 800 km, then every 4,000 km or 6 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Drive belt and roller weights (examine)

Engine

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): after 800 km, then every 4,000 km or 6 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Engine bolts and nuts (examine; check fasteners before each trip)

Engine

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): after 800 km, then every 4,000 km or 6 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Engine oil, JASO MB 15W-40 (replace)

Engine

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): after 800 km, then every 4,000 km or 6 months; check level before each trip. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Exhaust system (inspect)

Engine

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): after 800 km, then every 4,000 km or 6 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Lighting system (examine)

Engine

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): after 800 km, then every 4,000 km or 6 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Oil filter screen (clean or replace)

Engine

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): after 800 km, then every 4,000 km or 6 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Spark plug (examine)

Engine

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): after 800 km, then every 4,000 km or 6 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Air cleaner foam (examine)

Fuel and air

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): after 800 km, then every 4,000 km or 6 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Fuel filter (examine; check for leaks before each trip)

Fuel and air

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): after 800 km, then every 4,000 km or 6 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Fuel tank and fuel hoses (inspect)

Fuel and air

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): after 800 km, then every 4,000 km or 6 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Battery (inspect)

Ignition and electrics

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): after 800 km, then every 4,000 km or 6 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Clutch discs (examine)

Primary and gearbox

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): after 800 km, then every 4,000 km or 6 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Transmission leakage (examine)

Primary and gearbox

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): after 800 km, then every 4,000 km or 6 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Steering and bearings (examine)

Front end

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): after 800 km, then every 4,000 km or 6 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Front and rear suspension and shock absorption (examine)

Rear suspension and frame

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): after 800 km, then every 4,000 km or 6 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Main and side stand (examine, lubricate)

Rear suspension and frame

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): after 800 km, then every 4,000 km or 6 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Brake fluid (examine; check level before each trip)

Brakes

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): after 800 km, then every 4,000 km or 6 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Brake function and brake pads (examine)

Brakes

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): after 800 km, then every 4,000 km or 6 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Tire pressure (examine; check before each trip)

Wheels and tires

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): after 800 km, then every 4,000 km or 6 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Throttle cable adjustment (examine; check free play before each trip)

Controls and cables

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): after 800 km, then every 4,000 km or 6 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.

Every 3,000 mi or 12 months

8 items

Check throttle cable(s) free play and return

Fuel and air

Guideline
Adjust automatic / semi-automatic clutch

Primary and gearbox

Guideline
Check steering head bearing adjustment

Front end

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline
Check brake pads and discs

Brakes

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 4,000 mi or 12 months

3 items

Inspect, clean and gap spark plugs

Engine

Guideline
Inspect CVT drive belt, rollers / sliders and clutch shoes

Final drive

Guideline

Typical scooter interval. Your owner's manual figure governs; check belt width against the service limit.
Lubricate brake cam spindles, check linings and drums

Brakes

Guideline

Every 4,971 mi or 12 months

6 items

Compression (check)

Engine

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): every 8,000 km or 12 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Drive belt and roller weights (replace)

Engine

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): every 8,000 km or 12 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Idle speed (examine, adjust)

Engine

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): every 8,000 km or 12 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Valve clearance (examine, adjust)

Engine

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): every 8,000 km or 12 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Ignition timing (examine)

Ignition and electrics

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): every 8,000 km or 12 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Transmission oil (replace)

Primary and gearbox

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): at 800 km, then every 8,000 km or 12 months; examine every 4,000 km; check level before each trip. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.

Every 5,000 mi or 12 months

2 items

Change engine oil

Engine

Guideline

Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.
Replace oil filter

Engine

Guideline

Every 6,000 mi or 12 months

6 items

Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 7,456 mi or 18 months

5 items

Spark plug (replace)

Engine

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): every 12,000 km or 18 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Air cleaner foam (replace)

Fuel and air

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): every 12,000 km or 18 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Fuel filter (replace)

Fuel and air

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): every 12,000 km or 18 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Clutch discs (replace)

Primary and gearbox

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): every 12,000 km or 18 months. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.
Brake fluid (replace)

Brakes

Factory

Factory: Periodic maintenance table (Genuine Scooter Co. Urbano 200i owner's manual, official PDF, printed pp.32-33): every 12,000 km / 18 months or every 2 years. Columns as printed: before each trip; 1st service after 800 km (497 mi); every 4,000 km (2,485 mi) or 6 months; every 8,000 km (4,971 mi) or 12 months; every 12,000 km (7,456 mi) or 18 months. Key: I inspection recommended, not required; C clean or replace if necessary; L lubrication; E mandatory examination, adjust/replace as necessary; R mandatory replacement. Items marked # as printed. No model year printed.

Every 8,000 mi or 2 years

1 item

Check and adjust valve clearances

Engine

Guideline

Every 10,000 mi or 2 years

1 item

Compression test (or leak-down)

Engine

Guideline

Every 12,000 mi or 2 years

4 items

Replace air filter element

Fuel and air

Guideline
Synchronize throttle bodies

Fuel and air

Guideline
Clean and grease rear suspension linkage

Rear suspension and frame

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 12,000 mi or 3 years

1 item

Replace CVT drive belt

Final drive

Guideline

Typical scooter interval, or sooner if the belt is cracked, glazed or below its width limit.

Every 15,000 mi or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 15,000 mi

1 item

Replace brake linings / skim drums (wear based)

Brakes

Guideline

Every 16,000 mi or 4 years

1 item

Replace spark plugs

Engine

Guideline

Every 20,000 mi or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 24,000 mi or 4 years

1 item

Replace fuel filter

Fuel and air

Guideline

Every 25,000 mi or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 30,000 mi or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

3 items

Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Replace brake fluid

Brakes

Guideline

Every 4 years

3 items

Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.