MotoService Log
No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

GPX Moto · Shim-adjusted overhead-cam four-stroke, wet sump, gearbox shares engine oil, chain drive

FSE 300R

Library entry covers 2023

27 factory 52 guideline

Published source

GPX MOTO 300R FSE Owner's Handbook, recommended service and inspection schedule pp.18-19 (ManualsLib viewer pp.18-19)

Factory source. Covers GPX MOTO 300R FSE Owner's Handbook (names the 300R FSE only), no year printed.

79 items for a 2023 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)
Engine cycle
Four-stroke
Engine lubrication
Wet sump (oil in crankcase)
Oil filtration
Replaceable cartridge or spin-on filter
Valve gear
Overhead cam, shim adjusted (incl. desmo)
Ignition
Electronic (CDI / transistor / ECU)
Charging
Alternator / stator with rectifier
Battery
Wet cell (flooded lead-acid, needs topping up)
Fuel system
Fuel injection
Cooling
Liquid cooled
Primary drive
Gear or chain inside engine, shares engine oil
Gearbox oil
Shares engine oil
Clutch control
Hand lever, cable
Final drive
Chain
Front suspension
Telescopic fork
Rear suspension
Swingarm, single shock / cantilever
Front brake
Disc, hydraulic
Rear brake
Disc, hydraulic
Wheels
Spoked, tubed
Sidecar
No sidecar
Maintenance schedule

2023 GPX Moto FSE 300R

On the road: every 300 km

1 item
  • Check engine oil level
    Pre-ride / on the road
    Guideline

    Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

3 items
  • Check lights, horn, brake light switches
    Pre-ride / on the road
    Guideline
  • Check tire pressures
    Pre-ride / on the road
    Guideline
  • Lubricate drive chain
    Pre-ride / on the road
    Guideline

    Lube warm, ideally at the end of the riding day so it soaks in overnight. Sooner after rain.

On the road: every 800 km

1 item
  • Check coolant level
    Pre-ride / on the road
    Guideline

On the road: every 1,000 km

1 item
  • Check chain slack and rear wheel alignment
    Pre-ride / on the road
    Guideline

Every 1,600 km or 6 months

1 item
  • Inspect tire tread, sidewalls and date codes
    Wheels and tires
    Guideline

Every 3,219 km

3 items
  • Engine/gear oil (change)
    Engine
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): first after 1 hour; then every 2,000 miles for aggressive off-road riding or 3,000 miles for easier trail riding. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

  • Oil strainer (remove and clean)
    Engine
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): first after 1 hour; then at every oil change. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

  • Paper oil filter (change)
    Engine
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): first after 1 hour; then at every oil change. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

Every 5,000 km or 12 months

10 items
  • Check throttle cable(s) free play and return
    Fuel and air
    Guideline
  • Clean drive chain thoroughly (remove and soak, re-lube)
    Final drive
    Guideline

    Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.

  • Inspect chain and sprockets for wear (measure stretch)
    Final drive
    Guideline
  • Check steering head bearing adjustment
    Front end
    Guideline
  • Inspect fork seals, stanchions and fork boots
    Front end
    Guideline
  • Check footrests, pegs, rear brake and gear lever pivots
    Rear suspension and frame
    Guideline
  • Grease and check center / side stand and springs
    Rear suspension and frame
    Guideline
  • Check brake pads and discs
    Brakes
    Guideline
  • Check spoke tension and wheel true
    Wheels and tires
    Guideline
  • Check wheel bearings for play
    Wheels and tires
    Guideline

Every 65 h or 5,633 km

1 item
  • Fuel filter (replace)
    Fuel and air
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): every 3,500 miles or 65 hours. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

Every 6,500 km or 12 months

2 items
  • Inspect, clean and gap spark plugs
    Engine
    Guideline
  • Adjust clutch free play, lubricate cable and lever pivot
    Primary and gearbox
    Guideline

Every 8,000 km or 12 months

2 items
  • Change engine oil
    Engine
    Guideline

    Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.

  • Replace oil filter
    Engine
    Guideline

Every 8,047 km

1 item
  • Valve clearance, cold (check)
    Engine
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): every 5,000 miles; intake 0.10-0.15 mm, exhaust 0.15-0.20 mm. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

Every 9,500 km or 12 months

7 items
  • Inspect coolant hoses and clamps
    Engine
    Guideline
  • Clean / inspect air filter
    Fuel and air
    Guideline

    Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.

  • Check charging voltage and regulator / cut-out
    Ignition and electrics
    Guideline
  • Check swingarm bushes for play
    Rear suspension and frame
    Guideline
  • Inspect rear shocks for leaks and damping
    Rear suspension and frame
    Guideline
  • Lubricate control cables and lever pivots
    Controls and cables
    Guideline
  • Lubricate speedometer / tachometer cables, check drive
    Controls and cables
    Guideline

    A dry speedo cable whips the needle and eventually kills the instrument.

Every 16,000 km or 2 years

1 item
  • Compression test (or leak-down)
    Engine
    Guideline

Every 19,500 km or 2 years

4 items
  • Replace air filter element
    Fuel and air
    Guideline
  • Synchronize throttle bodies
    Fuel and air
    Guideline
  • Clean and grease rear suspension linkage
    Rear suspension and frame
    Guideline
  • Grease swingarm pivot
    Rear suspension and frame
    Guideline

Every 24,000 km or 3 years

1 item
  • Change fork oil
    Front end
    Guideline

    Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 24,000 km or 4 years

1 item
  • Check valve clearances (shim adjusted)
    Engine
    Guideline

Every 25,500 km or 4 years

1 item
  • Replace spark plugs
    Engine
    Guideline

Every 29,000 km

1 item
  • Replace chain and sprockets (wear based)
    Final drive
    Guideline

Every 32,000 km or 4 years

2 items
  • Repack / replace steering head bearings
    Front end
    Guideline

    Many old machines use loose balls in cups and cones. Taper roller conversions are common.

  • Repack / replace wheel bearings
    Wheels and tires
    Guideline

    Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 38,500 km or 4 years

1 item
  • Replace fuel filter
    Fuel and air
    Guideline

Every 40,000 km or 6 years

1 item
  • Replace swingarm bushes / bearings
    Rear suspension and frame
    Guideline

Every 48,500 km or 6 years

1 item
  • Rebuild forks: seals, bushes, springs
    Front end
    Guideline

Every 10 h

20 items
  • Final inspection and test ride
    Engine
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): once 1 hour after the first ride, then every 10 hours. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

  • Front and rear lights (check)
    Engine
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): once 1 hour after the first ride, then every 10 hours. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

  • Moving parts (lubricate and check)
    Engine
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): every 10 hours. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

  • Screws and nuts (check tightness)
    Engine
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): once 1 hour after the first ride, then every 10 hours. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

  • Air filter and air filter box (clean)
    Fuel and air
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): every 10 hours. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

  • Battery (check and charge)
    Ignition and electrics
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): every 10 hours. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

  • Clutch and throttle cables (check damage and routing)
    Primary and gearbox
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): every 10 hours. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

  • Chain tension (check)
    Final drive
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): once 1 hour after the first ride, then every 10 hours. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

  • Chain, sprockets, guide and chain (check)
    Final drive
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): every 10 hours. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

  • Steering head bearing (check for looseness)
    Front end
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): once 1 hour after the first ride, then every 10 hours. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

  • Frame and swingarm (check)
    Rear suspension and frame
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): every 10 hours. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

  • Shock absorber top mount and linkage (check)
    Rear suspension and frame
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): every 10 hours. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

  • Brake pedal and brake lever free play (check)
    Brakes
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): every 10 hours. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

  • Brake tubing (inspect for damage or leaks)
    Brakes
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): every 10 hours. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

  • Front and rear brake fluid level (check)
    Brakes
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): every 10 hours. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

  • Front and rear disc brakes and discs (check)
    Brakes
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): every 10 hours. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

  • Hub bearings and wheel hubs (check)
    Wheels and tires
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): every 10 hours. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

  • Rim runout and spoke tension (check)
    Wheels and tires
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): once 1 hour after the first ride, then every 10 hours. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

  • Tire condition and pressure (check)
    Wheels and tires
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): once 1 hour after the first ride, then every 10 hours. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

  • Throttle cable adjustment (check)
    Controls and cables
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): once 1 hour after the first ride, then every 10 hours. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

Every 20 h

1 item
  • Swingarm bearing wear (check)
    Rear suspension and frame
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): every 20 hours. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

Every 30 h

1 item
  • Clutch (check)
    Primary and gearbox
    Factory

    Factory: Recommended service and inspection schedule (Owner's Handbook pp.18-19): every 30 hours. Columns as printed: 1 hour after each ride (one-off), every 10 hours or after every race, every 20 hours, every 30 hours. The table is for reference; adjust to the model and use.

Every 6 months

1 item
  • Clean battery terminals, check charge and strap
    Ignition and electrics
    Guideline

Every 2 years

4 items
  • Replace coolant
    Engine
    Guideline
  • Inspect wiring, bullet connectors and ground points
    Ignition and electrics
    Guideline
  • Inspect frame, welds and lugs for cracks
    Rear suspension and frame
    Guideline
  • Replace brake fluid
    Brakes
    Guideline

Every 4 years

3 items
  • Replace fuel lines
    Fuel and air
    Guideline

    Old rubber and modern ethanol fuel do not mix well.

  • Inspect brake hoses; replace old rubber
    Brakes
    Guideline
  • Rebuild calipers and master cylinders (seals)
    Brakes
    Guideline

Every 6 years

2 items
  • Replace inner tubes and rim tape with tires
    Wheels and tires
    Guideline
  • Replace tires on age (regardless of tread)
    Wheels and tires
    Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.

Keep up with this schedule on your phone

Add the bike in the app and this chart loads itself, ready to log against and edit.

Coming soon to Google Play

Other 2023 GPX Moto models

All 2023 GPX Moto
2023
FSE 250E
Guideline
2023
FSE 450R
Guideline
2023
Kove FSE 450R Rally
Guideline
2023
TSE 250R
Factory