
Dyna Superglide (1573 cc)
Library entry covers 1995-2014
Published source
Harley-Davidson 2010 Dyna Models Owner's Manual, Regular Service Intervals: 2010 Dyna Models (manuals.plus PDF)
Factory source. Covers Harley-Davidson 2010 Dyna Models owner's manual (lists FXD Dyna Super Glide); one model-year edition for the 1995-2014 row.
71 items for a 2002 model, grouped by interval the way a factory chart is laid out.
How this bike is built (what the schedule is based on)
- Engine cycle
- Four-stroke
- Engine lubrication
- Dry sump (separate oil tank)
- Oil filtration
- Replaceable cartridge or spin-on filter
- Valve gear
- Hydraulic lifters (no routine clearance adjustment)
- Ignition
- Electronic (CDI / transistor / ECU)
- Charging
- Alternator / stator with rectifier
- Battery
- Wet cell (flooded lead-acid, needs topping up)
- Fuel system
- Fuel injection
- Cooling
- Air / oil cooled
- Primary drive
- Gear or chain inside engine, shares engine oil
- Gearbox oil
- Separate gearbox oil
- Clutch control
- Hand lever, cable
- Final drive
- Toothed belt
- Front suspension
- Telescopic fork
- Rear suspension
- Swingarm, twin shocks
- Front brake
- Disc, hydraulic
- Rear brake
- Disc, hydraulic
- Wheels
- Cast / alloy, tubeless
- Sidecar
- No sidecar
2002 Harley-Davidson Dyna Superglide (1573 cc)
On the road: every 200 mi
1 item-
Check engine oil levelPre-ride / on the roadGuideline
Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.
On the road: every 300 mi
2 items-
Check lights, horn, brake light switchesPre-ride / on the roadGuideline
-
Check tire pressuresPre-ride / on the roadGuideline
Every 1,000 mi or 6 months
1 item-
Inspect tire tread, sidewalls and date codesWheels and tiresGuideline
Every 3,000 mi or 12 months
7 items-
Check throttle cable(s) free play and returnFuel and airGuideline
-
Check steering head bearing adjustmentFront endGuideline
-
Inspect fork seals, stanchions and fork bootsFront endGuideline
-
Check footrests, pegs, rear brake and gear lever pivotsRear suspension and frameGuideline
-
Grease and check center / side stand and springsRear suspension and frameGuideline
-
Check brake pads and discsBrakesGuideline
-
Check wheel bearings for playWheels and tiresGuideline
Every 4,000 mi or 12 months
2 items-
Inspect, clean and gap spark plugsEngineGuideline
-
Adjust clutch free play, lubricate cable and lever pivotPrimary and gearboxGuideline
Every 5,000 mi or 12 months
6 items-
Change engine oilEngineGuideline
Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.
-
Exhaust system (inspect for leaks, cracks, loose or missing fasteners or heat shields; note 3)EngineFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): at 1,000 mi, then every 5,000 mi, or annually. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
-
Replace oil filterEngineGuideline
-
Fuel lines and fittings (inspect for leaks, contact or abrasion; notes 1, 3)Ignition and electricsFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): at 1,000 mi, then every 5,000 mi, or annually. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
-
Inspect drive belt, pulleys and tensionFinal driveGuideline
-
Oil lines and brake system (inspect for leaks, contact or abrasion; notes 1, 3)BrakesFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): at 1,000 mi, then every 5,000 mi, or annually. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
Every 5,000 mi
11 items-
Drive belt and sprockets (inspect, adjust belt; note 1)EngineFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): at 1,000 mi, then every 5,000 mi. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
-
Electrical equipment and switches (check operation)EngineFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): at 1,000 mi, then every 5,000 mi. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
-
Engine oil and filter (replace)EngineFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): at 1,000 mi, then every 5,000 mi. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
-
Road test (verify component and system functions)EngineFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): at 1,000 mi, then every 5,000 mi. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
-
Spark plugs (inspect)EngineFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): at 1,000 mi, then every 5,000 mi. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
-
Air cleaner (inspect, service as required)Fuel and airFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): at 1,000 mi, then every 5,000 mi. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
-
Clutch (check adjustment; note 1)Primary and gearboxFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): at 1,000 mi, then every 5,000 mi. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
-
Brake fluid (check level and condition; note 4)BrakesFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): at 1,000 mi, then every 5,000 mi. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
-
Brake pads and discs (inspect for wear)BrakesFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): at 1,000 mi, then every 5,000 mi. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
-
Throttle, brake and clutch controls (check, adjust, lubricate; note 1)BrakesFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): at 1,000 mi, then every 5,000 mi. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
-
Tires (check pressure, inspect tread)Wheels and tiresFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): at 1,000 mi, then every 5,000 mi. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
Every 6,000 mi or 12 months
6 items-
Clean / inspect air filterFuel and airGuideline
Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
-
Check charging voltage and regulator / cut-outIgnition and electricsGuideline
-
Check swingarm bushes for playRear suspension and frameGuideline
-
Inspect rear shocks for leaks and dampingRear suspension and frameGuideline
-
Lubricate control cables and lever pivotsControls and cablesGuideline
-
Lubricate speedometer / tachometer cables, check driveControls and cablesGuideline
A dry speedo cable whips the needle and eventually kills the instrument.
Every 10,000 mi or 2 years
2 items-
Compression test (or leak-down)EngineGuideline
-
Change gearbox oilPrimary and gearboxGuideline
Every 10,000 mi
5 items-
Critical fasteners (check tightness; note 1)EngineFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): at 1,000 mi, then every 10,000 mi. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
-
Engine mounts and stabilizer links (inspect; note 1)EngineFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): at 10,000, 20,000 and 30,000 mi. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
-
Primary chaincase lubricant (replace)Final driveFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): at 1,000 mi, then every 10,000 mi. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
-
Steering head bearings (adjust; notes 1, 2)Front endFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): at 1,000 mi, then every 10,000 mi. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
-
Jiffy stand (inspect, lubricate; note 1)Rear suspension and frameFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): at 1,000 mi, then every 10,000 mi. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
Every 12,000 mi or 2 years
3 items-
Replace air filter elementFuel and airGuideline
-
Synchronize throttle bodiesFuel and airGuideline
-
Grease swingarm pivotRear suspension and frameGuideline
Every 15,000 mi or 3 years
1 item-
Change fork oilFront endGuideline
Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.
Every 15,000 mi
1 item-
Wheel spokes, if equipped (check tightness; notes 1, 5)Wheels and tiresFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): at 1,000, 5,000 and 20,000 mi, then every 15,000 mi. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
Every 16,000 mi or 4 years
1 item-
Replace spark plugsEngineGuideline
Every 20,000 mi or 4 years
2 items-
Repack / replace steering head bearingsFront endGuideline
Many old machines use loose balls in cups and cones. Taper roller conversions are common.
-
Repack / replace wheel bearingsWheels and tiresGuideline
Cup-and-cone and taper roller hubs need periodic repacking and adjustment.
Every 20,000 mi
2 items-
Spark plugs (replace)EngineFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): at 20,000 mi. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
-
Transmission lubricant (replace)Primary and gearboxFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): at 1,000 and 20,000 mi. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
Every 24,000 mi or 4 years
1 item-
Replace fuel filterFuel and airGuideline
Every 25,000 mi or 6 years
1 item-
Replace swingarm bushes / bearingsRear suspension and frameGuideline
Every 25,000 mi
1 item-
Fuel pump filter (replace; note 1)Fuel and airFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): at 25,000 mi. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
Every 30,000 mi or 6 years
1 item-
Rebuild forks: seals, bushes, springsFront endGuideline
Every 30,000 mi
2 items-
Rear fork bearings (inspect; note 1)Front endFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): at 30,000 mi. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
-
Steering head bearings (disassemble, lubricate, inspect; note 2)Front endFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): every 30,000 mi. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
Every 50,000 mi
2 items-
Replace drive belt (wear or damage based)Final driveGuideline
-
Front fork oil (replace and inspect; notes 1, 6)Front endFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): every 50,000 mi. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
Every 6 months
1 item-
Clean battery terminals, check charge and strapIgnition and electricsGuideline
Every 12 months
1 item-
Battery (check, clean connections; note 3)Ignition and electricsFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): annually. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
Every 2 years
4 items-
Inspect wiring, bullet connectors and ground pointsIgnition and electricsGuideline
-
Inspect frame, welds and lugs for cracksRear suspension and frameGuideline
-
Brake fluid (replace DOT 4 and flush; note 4)BrakesFactory
Factory: Regular Service Intervals: 2010 Dyna Models (Harley-Davidson 2010 Dyna owner's manual, manual pp.114-116 of the PDF; model list prints FXD Dyna Super Glide): every two years. Columns as printed: 1,000 mi (1,600 km); 5,000 mi; 10,000; 15,000; 20,000; 25,000; 30,000 mi. Notes: 1 should be done by an authorized dealer unless you have the tools, data and skills; 2 disassemble, lubricate and inspect every 30,000 mi; 3 perform annually or at the specified interval, whichever first; 4 replace DOT 4 brake fluid and flush every two years; 5 spoke tension at 1,000, 5,000 and 20,000 mi, then every 15,000 mi; 6 replace fork oil and inspect every 50,000 mi. Ride under adverse conditions calls for more frequent service.
-
Replace brake fluidBrakesGuideline
Every 4 years
3 items-
Replace fuel linesFuel and airGuideline
Old rubber and modern ethanol fuel do not mix well.
-
Inspect brake hoses; replace old rubberBrakesGuideline
-
Rebuild calipers and master cylinders (seals)BrakesGuideline
Every 6 years
1 item-
Replace tires on age (regardless of tread)Wheels and tiresGuideline
Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.
Keep up with this schedule on your phone
Add the bike in the app and this chart loads itself, ready to log against and edit.
