MotoService Log
Harley-Davidson Sportster 883 / 1200 (Evolution)
Example photo: order_242 from Chile, CC BY-SA 2.0, Wikimedia Commons
Harley-Davidson · Harley-Davidson Evolution Sportster (1986-2021)

Sportster 883 / 1200 (Evolution)

Library entry covers 1986-2003

29 factory 24 guideline

Published source

2003 Harley-Davidson International Owner's Manual, Sportster Models, Table 19 Regular Service Intervals, p.E-77

Factory owner's handbook. Covers 2003 Sportster (Evolution, last year).

Open the source

53 items for a 2000 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)
Engine cycle
Four-stroke
Engine lubrication
Dry sump (separate oil tank)
Oil filtration
Replaceable cartridge or spin-on filter
Valve gear
Hydraulic lifters (no routine clearance adjustment)
Ignition
Electronic (CDI / transistor / ECU)
Charging
Alternator / stator with rectifier
Battery
Wet cell (flooded lead-acid, needs topping up)
Fuel system
Single carburetor
Cooling
Air / oil cooled
Primary drive
Chain in oil-bath case with its own oil
Gearbox oil
Separate gearbox oil
Clutch control
Hand lever, cable
Final drive
Toothed belt
Front suspension
Telescopic fork
Rear suspension
Swingarm, twin shocks
Front brake
Disc, hydraulic
Rear brake
Disc, hydraulic
Wheels
Cast / alloy, tubeless
Sidecar
No sidecar
Maintenance schedule

2000 Harley-Davidson Sportster 883 / 1200 (Evolution)

On the road: every 200 mi

1 item
  • Check engine oil level
    Pre-ride / on the road
    Guideline

    Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 300 mi

1 item
  • Check tire pressures
    Pre-ride / on the road
    Guideline

On the road: every 2,500 mi

1 item
  • Check lights, horn, brake light switches
    Pre-ride / on the road
    Factory

    Manual: Check operation of all electrical equipment and switches. Factory: I every 2500 mi. p.E-77 Table 19

Every 2,500 mi

7 items
  • Check throttle cable(s) free play and return
    Fuel and air
    Factory

    Manual: Check, adjust operation of enrichener, throttle control. Factory: I every 2500 mi. p.E-77 Table 19

  • Clean / inspect air filter
    Fuel and air
    Factory

    Manual: Inspect air cleaner, service as required. Factory: I at every column, every 2500 mi (4000 km). p.E-77 Table 19

  • Inspect fuel valve, lines and fittings for leaks
    Fuel and air
    Factory

    Factory: I every 2500 mi. p.E-77 Table 19

  • Clean battery terminals, check charge and strap
    Ignition and electrics
    Factory

    Manual: Check battery and clean connections. Factory: I every 2500 mi. p.E-77 Table 19

  • Inspect drive belt, pulleys and tension
    Final drive
    Factory

    Manual: Check and adjust rear belt. Factory: I every 2500 mi. p.E-77 Table 19

  • Inspect oil lines and brake system for leaks
    Brakes
    Factory

    Factory: I every 2500 mi. p.E-77 Table 19

  • Inspect tire tread, sidewalls and date codes
    Wheels and tires
    Factory

    Manual: Check tire pressure and inspect tread. Factory: every column, every 2500 mi. p.E-77 Table 19

Every 3,000 mi or 12 months

4 items
  • Check steering head bearing adjustment
    Front end
    Guideline
  • Inspect fork seals, stanchions and fork boots
    Front end
    Guideline
  • Check footrests, pegs, rear brake and gear lever pivots
    Rear suspension and frame
    Guideline
  • Check wheel bearings for play
    Wheels and tires
    Guideline

Every 5,000 mi

14 items
  • Change engine oil
    Engine
    Factory

    Manual: Change engine oil and filter. Factory: R at 1000 mi then every 5000 mi (8000 km); I between. p.E-77 Table 19

  • Check engine idle speed
    Engine
    Factory

    Factory: I at 1000 mi then every 5000 mi. p.E-77 Table 19

  • Inspect, clean and gap spark plugs
    Engine
    Factory

    Manual: Spark plugs: inspect. Factory: I at 1000, 5000, 15000; R at 10000s. p.E-77 Table 19

  • Replace oil filter
    Engine
    Factory

    Manual: Change engine oil and filter (filter). Factory: changed with the oil every 5000 mi. p.E-77 Table 19

  • Check / set ignition timing
    Ignition and electrics
    Factory

    Manual: Check ignition timing. Factory: I every 5000 mi. p.E-77 Table 19

  • Adjust clutch free play, lubricate cable and lever pivot
    Primary and gearbox
    Factory

    Manual: Clutch adjustment. Factory: I at 1000 mi then every 5000 mi. p.E-77 Table 19

  • Change gearbox oil
    Primary and gearbox
    Factory

    Manual: Change transmission lube and clean drain plug. Factory: R at 1000 then every 5000 mi; I between. p.E-77 Table 19

  • Change primary chaincase oil
    Primary and gearbox
    Factory

    Manual: Change primary chaincase lube and clean drain plug. Factory: RI at 1000 mi then every 5000 mi. p.E-77 Table 19

  • Check / adjust primary chain
    Primary and gearbox
    Factory

    Manual: Adjust primary chain. Factory: A at 1000 mi then every 5000 mi. p.E-77 Table 19

  • Repack / replace steering head bearings
    Front end
    Factory

    Manual: Steering head bearings: lubricate. Factory: L or AL every 5000 mi; A at 1000; D at 30000 mi. p.E-77 Table 19

  • Check brake fluid reservoir levels and condition
    Brakes
    Factory

    Factory: I at 1000 mi then every 5000 mi. p.E-77 Table 19

  • Check brake pads and discs
    Brakes
    Factory

    Manual: Inspect brake pad linings and discs for wear. Factory: I at 1000 mi then every 5000 mi. p.E-77 Table 19

  • Check spoke tension and wheel true
    Wheels and tires
    Factory

    Manual: Check wheel spoke tightness. Factory: I every 5000 mi. p.E-77 Table 19

  • Lubricate control cables and lever pivots
    Controls and cables
    Factory

    Manual: Lubricate front brake lever, throttle and clutch cables, rear brake pedal bushing. Factory: IL at 1000 mi then every 5000 mi. p.E-77 Table 19

Every 6,000 mi or 12 months

5 items
  • Clean carburetor float bowl(s), check float level and jets
    Fuel and air
    Guideline

    Ethanol fuel varnishes old carbs quickly in storage.

  • Check charging voltage and regulator / cut-out
    Ignition and electrics
    Guideline
  • Check swingarm bushes for play
    Rear suspension and frame
    Guideline
  • Inspect rear shocks for leaks and damping
    Rear suspension and frame
    Guideline
  • Lubricate speedometer / tachometer cables, check drive
    Controls and cables
    Guideline

    A dry speedo cable whips the needle and eventually kills the instrument.

Every 10,000 mi or 2 years

1 item
  • Compression test (or leak-down)
    Engine
    Guideline

Every 10,000 mi

4 items
  • Check engine mounting bolts and plates
    Engine
    Factory

    Manual: Check engine mounts. Factory: I every 10000 mi. p.E-77 Table 19

  • Check tightness of all critical fasteners
    Engine
    Factory

    Factory: T at 1000 mi then every 10000 mi. p.E-77 Table 19

  • Replace spark plugs
    Engine
    Factory

    Manual: Change spark plugs. Factory: R every 10000 mi. p.E-77 Table 19

  • Grease and check center / side stand and springs
    Rear suspension and frame
    Factory

    Manual: Lubricate jiffy stand. Factory: L at 1000 mi then every 10000 mi. p.E-77 Table 19

Every 12,000 mi or 2 years

1 item
  • Replace air filter element
    Fuel and air
    Guideline

Every 20,000 mi or 4 years

1 item
  • Repack / replace wheel bearings
    Wheels and tires
    Guideline

    Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 20,000 mi

3 items
  • Clean fuel tap filter / sediment bowl
    Fuel and air
    Factory

    Manual: Clean fuel tank filter screen. Factory: X at 20000 and 40000 mi. p.E-77 Table 19

  • Change fork oil
    Front end
    Factory

    Manual: Change front fork oil. Factory: X at 20000 and 40000 mi. p.E-77 Table 19

  • Grease swingarm pivot
    Rear suspension and frame
    Factory

    Manual: Repack rear fork bearings (if applicable). Factory: X at 20000 and 40000 mi. p.E-77 Table 19

Every 25,000 mi or 6 years

1 item
  • Replace swingarm bushes / bearings
    Rear suspension and frame
    Guideline

Every 30,000 mi or 6 years

1 item
  • Rebuild forks: seals, bushes, springs
    Front end
    Guideline

Every 50,000 mi

1 item
  • Replace drive belt (wear or damage based)
    Final drive
    Guideline

Every 2 years

3 items
  • Inspect wiring, bullet connectors and ground points
    Ignition and electrics
    Guideline
  • Inspect frame, welds and lugs for cracks
    Rear suspension and frame
    Guideline
  • Replace brake fluid
    Brakes
    Guideline

Every 4 years

3 items
  • Replace fuel lines
    Fuel and air
    Guideline

    Old rubber and modern ethanol fuel do not mix well.

  • Inspect brake hoses; replace old rubber
    Brakes
    Guideline
  • Rebuild calipers and master cylinders (seals)
    Brakes
    Guideline

Every 6 years

1 item
  • Replace tires on age (regardless of tread)
    Wheels and tires
    Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.

Keep up with this schedule on your phone

Add the bike in the app and this chart loads itself, ready to log against and edit.

Coming soon to Google Play

Other 2000 Harley-Davidson models

All 2000 Harley-Davidson