V-Rod (VRSC)
Library entry covers 2002-2017
Published source
Harley-Davidson/Buell 2006 Service Intervals, Table 46: VRSC Models
Factory factory bulletin. Covers 2006 VRSC (Table 46).
Open the source48 items for a 2005 model, grouped by interval the way a factory chart is laid out.
How this bike is built (what the schedule is based on)
- Engine cycle
- Four-stroke
- Engine lubrication
- Dry sump (separate oil tank)
- Oil filtration
- Replaceable cartridge or spin-on filter
- Valve gear
- Overhead cam, shim adjusted (incl. desmo)
- Ignition
- Electronic (CDI / transistor / ECU)
- Charging
- Alternator / stator with rectifier
- Battery
- Wet cell (flooded lead-acid, needs topping up)
- Fuel system
- Fuel injection
- Cooling
- Liquid cooled
- Primary drive
- Gear or chain inside engine, shares engine oil
- Gearbox oil
- Separate gearbox oil
- Clutch control
- Hand lever, hydraulic
- Final drive
- Toothed belt
- Front suspension
- Telescopic fork
- Rear suspension
- Swingarm, twin shocks
- Front brake
- Disc, hydraulic
- Rear brake
- Disc, hydraulic
- Wheels
- Cast / alloy, tubeless
- Sidecar
- No sidecar
2005 Harley-Davidson V-Rod (VRSC)
On the road: every 200 mi
1 item-
Check engine oil levelPre-ride / on the roadGuideline
Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.
On the road: every 300 mi
2 items-
Check lights, horn, brake light switchesPre-ride / on the roadGuideline
-
Check tire pressuresPre-ride / on the roadGuideline
On the road: every 500 mi
1 item-
Check coolant levelPre-ride / on the roadGuideline
Every 3,000 mi or 12 months
5 items-
Check throttle cable(s) free play and returnFuel and airGuideline
-
Check steering head bearing adjustmentFront endGuideline
-
Inspect fork seals, stanchions and fork bootsFront endGuideline
-
Check footrests, pegs, rear brake and gear lever pivotsRear suspension and frameGuideline
-
Check wheel bearings for playWheels and tiresGuideline
Every 4,000 mi or 12 months
1 item-
Inspect, clean and gap spark plugsEngineGuideline
Every 5,000 mi
8 items-
Change engine oilEngineFactory
Manual: Engine oil and filter: replace. Factory: Cols 1,000/5,000/10,000/15,000/20,000/25,000 mi; marked every column.
-
Replace oil filterEngineFactory
Manual: Engine oil and filter: replace. Factory: Every column.
-
Clean / inspect air filterFuel and airFactory
Manual: Air cleaner: inspect, service as required. Factory: Every column.
-
Inspect drive belt, pulleys and tensionFinal driveFactory
Manual: Rear belt and sprockets: inspect, adjust belt. Factory: Every column.
-
Grease and check center / side stand and springsRear suspension and frameFactory
Manual: Jiffy stand: inspect and lubricate. Factory: Every column.
-
Check brake pads and discsBrakesFactory
Manual: Brake pads and discs: inspect for wear. Factory: Every column.
-
Inspect tire tread, sidewalls and date codesWheels and tiresFactory
Manual: Tires: check pressure, inspect tread. Factory: Every column.
-
Lubricate control cables and lever pivotsControls and cablesFactory
Manual: Throttle, brake and clutch controls: check, adjust, lubricate. Factory: Every column.
Every 6,000 mi or 12 months
5 items-
Inspect coolant hoses and clampsEngineGuideline
-
Check charging voltage and regulator / cut-outIgnition and electricsGuideline
-
Check swingarm bushes for playRear suspension and frameGuideline
-
Inspect rear shocks for leaks and dampingRear suspension and frameGuideline
-
Lubricate speedometer / tachometer cables, check driveControls and cablesGuideline
A dry speedo cable whips the needle and eventually kills the instrument.
Every 10,000 mi or 2 years
2 items-
Compression test (or leak-down)EngineGuideline
-
Change gearbox oilPrimary and gearboxGuideline
Every 12,000 mi or 2 years
2 items-
Replace air filter elementFuel and airGuideline
-
Synchronize throttle bodiesFuel and airGuideline
Every 12,000 mi
1 item-
Check and adjust valve clearancesEngineFactory
Manual: Valve lash: adjust. Factory: Text row; interval may vary with riding style (fn 4).
Every 15,000 mi or 4 years
1 item-
Check valve clearances (shim adjusted)EngineGuideline
Every 16,000 mi or 4 years
1 item-
Replace spark plugsEngineGuideline
Every 20,000 mi or 4 years
1 item-
Repack / replace wheel bearingsWheels and tiresGuideline
Cup-and-cone and taper roller hubs need periodic repacking and adjustment.
Every 24,000 mi or 4 years
1 item-
Replace fuel filterFuel and airGuideline
Every 25,000 mi or 6 years
1 item-
Replace swingarm bushes / bearingsRear suspension and frameGuideline
Every 30,000 mi or 6 years
1 item-
Rebuild forks: seals, bushes, springsFront endGuideline
Every 30,000 mi
4 items-
Replace coolantEngineFactory
Manual: Coolant: replace. Factory: Text row.
-
Change fork oilFront endFactory
Manual: Front fork oil: replace. Factory: Text row.
-
Repack / replace steering head bearingsFront endFactory
Manual: Steering head bearings. Factory: Fn 2: disassemble, lubricate, inspect every 30,000 mi.
-
Grease swingarm pivotRear suspension and frameFactory
Manual: Rear fork bearings: repack. Factory: Text row.
Every 50,000 mi
1 item-
Replace drive belt (wear or damage based)Final driveGuideline
Every 12 months
1 item-
Clean battery terminals, check charge and strapIgnition and electricsFactory
Manual: Battery: check and clean connections. Factory: Annually (fn 3).
Every 2 years
4 items-
Inspect wiring, bullet connectors and ground pointsIgnition and electricsGuideline
-
Replace hydraulic clutch fluidPrimary and gearboxGuideline
-
Inspect frame, welds and lugs for cracksRear suspension and frameGuideline
-
Replace brake fluidBrakesFactory
Manual: Brake fluid. Factory: Replace DOT 4 and flush system every two years (fn 5).
Every 4 years
3 items-
Replace fuel linesFuel and airGuideline
Old rubber and modern ethanol fuel do not mix well.
-
Inspect brake hoses; replace old rubberBrakesGuideline
-
Rebuild calipers and master cylinders (seals)BrakesGuideline
Every 6 years
1 item-
Replace tires on age (regardless of tread)Wheels and tiresGuideline
Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.
Keep up with this schedule on your phone
Add the bike in the app and this chart loads itself, ready to log against and edit.