No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

Hero · Overhead-cam four-stroke single, wet sump, separate gearbox oil, CVT belt drive

Destini (125 cc)

Library entry covers 2019-2024

36 factory 48 guideline

Published source

Hero Destini 125 Platinum Programd FI 2021 Owner's Manual, maintenance schedule pp.55-57 (manualsnet)

Factory source. Covers Hero Destini 125 Platinum Programd FI 2021 owner's manual (fuel-injected); the 2019 carburetor model in the 2019-2024 row uses a different manual.

84 items for a 2021 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, screw/locknut adjusters
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Air / oil cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Separate gearbox oil
Clutch control: Automatic or semi-automatic
Final drive: Belt CVT, scooter automatic
Front suspension: Telescopic fork
Rear suspension: Swingarm, single shock / cantilever
Front brake: Disc, hydraulic
Rear brake: Drum (or band / belt rim)
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

2021 Hero Destini (125 cc)

On the road: every 300 km

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

Every 1,600 km or 6 months

2 items

Adjust rear drum brake and rod / cable linkage

Brakes

Guideline
Inspect tire tread, sidewalls and date codes

Wheels and tires

Guideline

Every 3,000 km

24 items

Belt case and kick starter driven gear (clean and lubricate)

Engine

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at every service: 500-750 km, then every 3,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Crankcase drain and breather tube (inspect and clean)

Engine

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at every service: 500-750 km, then every 3,000 km; more often in rain or at full throttle. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Engine idle speed (inspect)

Engine

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at every service: 500-750 km, then every 3,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Nuts, bolts and fasteners (inspect)

Engine

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at every service: 500-750 km, then every 3,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Rear suspension and mounting bushes (inspect for play)

Engine

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at every service: 500-750 km, then every 3,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Spark plug (inspect, clean and adjust)

Engine

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at every service: 500-750 km, then every 3,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Throttle operation and play (inspect and adjust)

Engine

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at every service: 500-750 km, then every 3,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Valve clearance (inspect and adjust)

Engine

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): every 3,000 km from the 2nd service. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
i3s switch (inspect)

Engine

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at every service: 500-750 km, then every 3,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Air cleaner pre-foam element (inspect and clean)

Fuel and air

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): every 3,000 km from the 2nd service. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Fuel lines (inspect)

Fuel and air

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at every service: 500-750 km, then every 3,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Fuel tank lid cover operation (inspect and adjust)

Fuel and air

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at every service: 500-750 km, then every 3,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Battery voltage, stop lamp switch and headlamp focus (inspect)

Ignition and electrics

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at every service: 500-750 km, then every 3,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Front suspension and fork oil (inspect)

Front end

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at every service: 500-750 km, then every 3,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Steering head bearings (inspect and adjust)

Front end

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at every service: 500-750 km, then every 3,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Main stand and side stand (lubricate)

Rear suspension and frame

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at every service: 500-750 km, then every 3,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Side stand switch, if installed (inspect and clean)

Rear suspension and frame

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at every service: 500-750 km, then every 3,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Brake shoe wear (inspect)

Brakes

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at every service: 500-750 km, then every 3,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Brake system (clean and lubricate)

Brakes

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at every service: 500-750 km, then every 3,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Front and integrated brake lever free play (inspect and adjust)

Brakes

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at every service: 500-750 km, then every 3,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Wheel bearings (inspect free play)

Wheels and tires

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at every service: 500-750 km, then every 3,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Wheels and tires (inspect)

Wheels and tires

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at every service: 500-750 km, then every 3,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Evaporative emission control system: canister hoses and canister (inspect)

Controls and cables

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at every service: 500-750 km, then every 3,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Lever lock operation (inspect)

Controls and cables

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at every service: 500-750 km, then every 3,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.

Every 5,000 km or 12 months

8 items

Check throttle cable(s) free play and return

Fuel and air

Guideline
Adjust automatic / semi-automatic clutch

Primary and gearbox

Guideline
Check steering head bearing adjustment

Front end

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline
Check brake pads and discs

Brakes

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 6,000 km

5 items

Drive belt (inspect)

Engine

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at 6,000 and 12,000 km, then every 6,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Engine oil (replace)

Engine

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at the 1st, 3rd and 5th services, then every 6,000 km; top up at the services between. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Engine oil strainer screen (clean)

Engine

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at the 1st, 3rd and 5th services, then every 6,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Muffler and catalytic converter (inspect; CO emission at idle)

Engine

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at 6,000 and 12,000 km, then every 6,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Clutch shoe wear (inspect)

Primary and gearbox

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at 6,000 and 12,000 km, then every 6,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.

Every 6,500 km or 12 months

3 items

Inspect, clean and gap spark plugs

Engine

Guideline
Inspect CVT drive belt, rollers / sliders and clutch shoes

Final drive

Guideline

Typical scooter interval. Your owner's manual figure governs; check belt width against the service limit.
Lubricate brake cam spindles, check linings and drums

Brakes

Guideline

Every 8,000 km or 12 months

2 items

Change engine oil

Engine

Guideline

Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.
Replace oil filter

Engine

Guideline

Every 9,500 km or 12 months

6 items

Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 10,000 km or 12 months

1 item

Final drive oil (replace)

Engine

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): every 10,000 km or once a year, whichever is earlier. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.

Every 12,000 km

2 items

Spark plug (replace)

Engine

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): every 12,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Steering head bearings (lubricate)

Front end

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): at the 5th service (12,000 km), then every 12,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.

Every 13,000 km or 2 years

1 item

Check and adjust valve clearances

Engine

Guideline

Every 15,000 km

1 item

Air cleaner elements, pre-foam and viscous (replace)

Fuel and air

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): every 15,000 km; at 12,000 km inspect the viscous element and replace if choked; replace either if damaged. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.

Every 16,000 km or 2 years

2 items

Compression test (or leak-down)

Engine

Guideline
Change gearbox oil

Primary and gearbox

Guideline

Every 19,500 km or 2 years

4 items

Replace air filter element

Fuel and air

Guideline
Synchronize throttle bodies

Fuel and air

Guideline
Clean and grease rear suspension linkage

Rear suspension and frame

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 19,500 km or 3 years

1 item

Replace CVT drive belt

Final drive

Guideline

Typical scooter interval, or sooner if the belt is cracked, glazed or below its width limit.

Every 20,000 km or 2 years

1 item

Front fork oil (replace)

Front end

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): every 2 years or 20,000 km, whichever is earlier. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.

Every 21,000 km or 2 years

1 item

Pinion starter assembly (inspect at 9,000 km; replace)

Engine

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): every 2 years or 21,000 km, whichever is earlier. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.

Every 24,000 km or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 24,000 km

2 items

Drive belt (replace)

Engine

Factory

Factory: Maintenance schedule (manual pp.55-57, manualsnet viewer pp.58-60): every 24,000 km. Columns as printed: free services 1st at 500-750 km or 60 days, 2nd 3,000-3,500 km, 3rd 6,000-6,500 km, 4th 9,000-9,500 km, 5th 12,000-12,500 km (each within the next 100 days); after the free services, once every 3,000 km (each paid service within 90 days or 3,000 km). Codes: I inspect; C clean; R replace; A adjust; L lubricate; T top up; E emission check. At higher readings repeat the same intervals.
Replace brake linings / skim drums (wear based)

Brakes

Guideline

Every 25,500 km or 4 years

1 item

Replace spark plugs

Engine

Guideline

Every 32,000 km or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 38,500 km or 4 years

1 item

Replace fuel filter

Fuel and air

Guideline

Every 40,000 km or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 48,500 km or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

3 items

Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Replace brake fluid

Brakes

Guideline

Every 4 years

3 items

Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.