MotoService Log
Hesketh V1000
Example photo: Mike Schinkel, CC BY 2.0, Wikimedia Commons
Hesketh · Modern chain-drive motorcycle (2000-)

V1000

Library entry covers 1980-1982

19 factory 41 guideline

Published source

Hesketh V1000 Owner's Manual (Hesketh Motorcycles PLC), Regular Servicing p.114

Factory owner's handbook. Covers Hesketh V1000 owner's manual (Hesketh Motorcycles PLC); chart in miles.

Open the source

60 items for a 1980 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)
Engine cycle
Four-stroke
Engine lubrication
Wet sump (oil in crankcase)
Oil filtration
Replaceable cartridge or spin-on filter
Valve gear
Overhead cam, shim adjusted (incl. desmo)
Ignition
Electronic (CDI / transistor / ECU)
Charging
Alternator / stator with rectifier
Battery
Wet cell (flooded lead-acid, needs topping up)
Fuel system
Two or more carburetors
Cooling
Air / oil cooled
Primary drive
Gear or chain inside engine, shares engine oil
Gearbox oil
Shares engine oil
Clutch control
Hand lever, cable
Final drive
Chain
Front suspension
Telescopic fork
Rear suspension
Swingarm, twin shocks
Front brake
Disc, hydraulic
Rear brake
Disc, hydraulic
Wheels
Cast / alloy, tubeless
Sidecar
No sidecar
Maintenance schedule

1980 Hesketh V1000

On the road: every 200 mi

1 item
  • Check engine oil level
    Pre-ride / on the road
    Guideline

    Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 300 mi

3 items
  • Check lights, horn, brake light switches
    Pre-ride / on the road
    Guideline
  • Check tire pressures
    Pre-ride / on the road
    Guideline
  • Lubricate drive chain
    Pre-ride / on the road
    Guideline

    Lube warm, ideally at the end of the riding day so it soaks in overnight. Sooner after rain.

On the road: every 600 mi

1 item
  • Check chain slack and rear wheel alignment
    Pre-ride / on the road
    Guideline

On the road: every 1,000 mi

1 item
  • Check road kit: plugs, points file, master link, tube patches, wire, tape
    Pre-ride / on the road
    Guideline

On the road: every 3,000 mi

1 item
  • Walk-around: check nuts and bolts for vibration loosening
    Pre-ride / on the road
    Factory

    Manual: Check all fastenings and correct where necessary. Factory: Regular servicing p.114: every 3000 miles; first dealer check at 600 miles (p.30)

Every 1,000 mi or 1 month

1 item
  • Check battery electrolyte, top up with distilled water
    Ignition and electrics
    Guideline

    Wet-cell batteries on old machines need regular topping up, more in hot weather.

Every 1,000 mi or 6 months

1 item
  • Inspect tire tread, sidewalls and date codes
    Wheels and tires
    Guideline

Every 1,500 mi or 12 months

1 item
  • Adjust clutch free play, lubricate cable and lever pivot
    Primary and gearbox
    Guideline

Every 3,000 mi or 12 months

13 items
  • Check engine mounting bolts and plates
    Engine
    Guideline
  • Check throttle cable(s) free play and return
    Fuel and air
    Guideline
  • Clean / inspect air filter
    Fuel and air
    Guideline

    Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.

  • Clean fuel tap filter / sediment bowl
    Fuel and air
    Guideline
  • Synchronize carburetors
    Fuel and air
    Guideline
  • Adjust clutch pushrod / clutch adjuster
    Primary and gearbox
    Guideline
  • Check chain guard, chain oiler (if fitted), rear chain case
    Final drive
    Guideline
  • Check steering damper (friction or hydraulic)
    Front end
    Guideline
  • Check steering head bearing adjustment
    Front end
    Guideline
  • Inspect fork seals, stanchions and fork boots
    Front end
    Guideline
  • Check footrests, pegs, rear brake and gear lever pivots
    Rear suspension and frame
    Guideline
  • Grease and check center / side stand and springs
    Rear suspension and frame
    Guideline
  • Check wheel bearings for play
    Wheels and tires
    Guideline

Every 3,000 mi

7 items
  • Change engine oil
    Engine
    Factory

    Factory: Regular servicing p.114: every 3000 miles

  • Inspect, clean and gap spark plugs
    Engine
    Factory

    Manual: Check and adjust sparking plugs. Factory: Regular servicing p.114: every 3000 miles

  • Replace oil filter
    Engine
    Factory

    Manual: Renew oil filter. Factory: Regular servicing p.114: every 3000 miles

  • Clean drive chain thoroughly (remove and soak, re-lube)
    Final drive
    Factory

    Manual: Lubricate chain. Factory: Regular servicing p.114: every 3000 miles, plus the daily checks (p.16)

  • Inspect chain and sprockets for wear (measure stretch)
    Final drive
    Factory

    Manual: Check drive sprockets, chain and rear brake linkage bearings. Factory: Regular servicing p.114: every 3000 miles; cam chains also checked and adjusted at this interval

  • Check brake pads and discs
    Brakes
    Factory

    Manual: Check brake pad wear and renew if necessary. Factory: Regular servicing p.114: every 3000 miles

  • Lubricate control cables and lever pivots
    Controls and cables
    Factory

    Manual: Lubricate cables, control pivots and stands. Factory: Regular servicing p.114: every 3000 miles

Every 4,000 mi or 12 months

1 item
  • Replace spark plugs
    Engine
    Guideline

Every 5,000 mi or 2 years

1 item
  • Check cylinder head bolt torque
    Engine
    Guideline

    Air-cooled iron and alloy engines can lose head bolt tension; follow your manual's sequence and whether it is done hot or cold.

Every 6,000 mi or 12 months

4 items
  • Clean carburetor float bowl(s), check float level and jets
    Fuel and air
    Guideline

    Ethanol fuel varnishes old carbs quickly in storage.

  • Check charging voltage and regulator / cut-out
    Ignition and electrics
    Guideline
  • Check swingarm bushes for play
    Rear suspension and frame
    Guideline
  • Inspect rear shocks for leaks and damping
    Rear suspension and frame
    Guideline

Every 6,000 mi or 2 years

2 items
  • Check engine breather and oil return
    Engine
    Guideline
  • Check valve clearances (shim adjusted)
    Engine
    Guideline

Every 9,000 mi

2 items
  • Check and adjust valve clearances
    Engine
    Factory

    Manual: Check valve clearances. Factory: Regular servicing p.114: every 9000 miles (see workshop manual)

  • Replace air filter element
    Fuel and air
    Factory

    Manual: Renew air filter elements. Factory: Regular servicing p.114: every 9000 miles in normal use

Every 10,000 mi or 2 years

1 item
  • Compression test (or leak-down)
    Engine
    Guideline

Every 10,000 mi

1 item
  • Replace chain and sprockets (wear based)
    Final drive
    Guideline

Every 15,000 mi or 5 years

1 item
  • Inspect clutch plates and springs
    Primary and gearbox
    Guideline

Every 20,000 mi or 4 years

1 item
  • Repack / replace wheel bearings
    Wheels and tires
    Guideline

    Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 25,000 mi or 6 years

1 item
  • Replace swingarm bushes / bearings
    Rear suspension and frame
    Guideline

Every 30,000 mi or 6 years

1 item
  • Rebuild forks: seals, bushes, springs
    Front end
    Guideline

Every 12 months

1 item
  • Check speedometer / odometer against a known distance
    Controls and cables
    Guideline

    Old speedos drift with tire size and drive wear. Use phone GPS over a measured 10 miles / km.

Every 2 years

11 items
  • Inspect fuel tank for rust, sealer failure, leaks
    Fuel and air
    Guideline
  • Replace fuel lines
    Fuel and air
    Factory

    Manual: Renew gas pipes. Factory: Regular servicing p.114

  • Clean battery terminals, check charge and strap
    Ignition and electrics
    Factory

    Manual: Check battery condition and renew if necessary. Factory: Regular servicing p.114

  • Inspect wiring, bullet connectors and ground points
    Ignition and electrics
    Factory

    Manual: Check all bulbs, renew any blackened or silvered. Factory: Regular servicing p.114

  • Change fork oil
    Front end
    Factory

    Manual: Renew oil in front forks and rear dampers. Factory: Regular servicing p.114: overhaul every 2 years irrespective of mileage

  • Repack / replace steering head bearings
    Front end
    Factory

    Manual: Dismantle and grease steering head bearings. Factory: Regular servicing p.114

  • Grease swingarm pivot
    Rear suspension and frame
    Factory

    Manual: Dismantle and grease swinging arm bearings. Factory: Regular servicing p.114

  • Inspect frame, welds and lugs for cracks
    Rear suspension and frame
    Guideline
  • Rebuild calipers and master cylinders (seals)
    Brakes
    Factory

    Manual: Renew all hydraulic rubbers and hoses. Factory: Regular servicing p.114: refill with new fluid

  • Replace brake fluid
    Brakes
    Factory

    Manual: Refill hydraulic systems with new fluid. Factory: Regular servicing p.114: done with the hydraulic rubber and hose renewal

  • Lubricate speedometer / tachometer cables, check drive
    Controls and cables
    Factory

    Manual: Grease inner cables of speedometer, rev counter and throttle drum. Factory: Regular servicing p.114

Every 4 years

1 item
  • Inspect brake hoses; replace old rubber
    Brakes
    Guideline

Every 6 years

1 item
  • Replace tires on age (regardless of tread)
    Wheels and tires
    Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.

Keep up with this schedule on your phone

Add the bike in the app and this chart loads itself, ready to log against and edit.

Coming soon to Google Play