Honda ADV150 — Example photo: Firzafp, CC BY 4.0, Wikimedia Commons

Have this bike? Send a photo or the manual's service chart

Honda · Overhead-cam four-stroke single, wet sump, separate gearbox oil, CVT belt drive

ADV150

Library entry covers 2021-2023

26 factory 36 guideline

Published source

Honda ADV150 Buku Pedoman Pemilik 2019, BPP_ADV150 (Astra Honda Motor, Indonesia market, Indonesian), Jadwal Perawatan Berkala pp.73-74

Factory owner's handbook. Covers ADV150; 2019 Astra Honda Motor owner's manual (Buku Pedoman Pemilik); Indonesia market, Indonesian. Table gives km and month (Bulan) per column (1-36 thousand km); no mile figures printed; footnote *1 repeat at the established frequency beyond the table. In the source render the letters inside the gray squares are missing, so inspect (P) and clean (B) marks look identical; replace (G) shows as a filled circle.

62 items for a 2023 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, screw/locknut adjusters
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Liquid cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Separate gearbox oil
Clutch control: Automatic or semi-automatic
Final drive: Belt CVT, scooter automatic
Front suspension: Telescopic fork
Rear suspension: Swingarm, twin shocks
Front brake: Disc, hydraulic
Rear brake: Drum (or band / belt rim)
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

2023 Honda ADV150

On the road: every 300 km

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

On the road: every 800 km

1 item

Check coolant level

Pre-ride / on the road

Guideline

Every 1,600 km or 6 months

1 item

Adjust rear drum brake and rod / cable linkage

Brakes

Guideline

Every 5,000 km or 12 months

4 items

Adjust automatic / semi-automatic clutch

Primary and gearbox

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 6,000 km or 6 months

13 items

Change engine oil

Engine

Factory

Manual: Engine oil (replace). Factory: Replace (G, filled circle) at 1000 km/2 months initial, then every 6000 km/6 months through 36000 km; also replace at annual check; level check before riding (Oli Mesin)
Check and adjust valve clearances

Engine

Factory

Manual: Valve clearance (Jarak Renggang Klep). Factory: Square mark every 6000 km/6 months from 6000 km through 36000 km; no annual check; dealer item (wrench: intermediate, AHASS recommended). This PDF prints Periksa (inspect) and Bersihkan (clean) with identical squares, so the chart does not show which of the two applies (rendered from the Honda PDF in the browser)
Check engine breather and oil return

Engine

Factory

Manual: Crankcase breather (service). Factory: Marked every 6000 km/6 months from 6000 km with a square mark; the source render shows P (inspect) and B (clean) as identical blank gray squares, letter not visible, so clean vs inspect cannot be read from this image; service more often if ridden in rain or at high speed (Pernapasan Bak Mesin)
Engine idle speed (inspect)

Engine

Factory

Factory: Square mark at 1000 km/2 months, then every 6000 km/6 months; annual check (Putaran Stasioner Mesin); dealer item (wrench: intermediate, AHASS recommended)
Headlight aim (inspect)

Engine

Factory

Factory: Square mark every 6000 km/6 months from 6000 km; annual check (Arah Sinar Lampu Depan)
Check throttle cable(s) free play and return

Fuel and air

Factory

Manual: Throttle operation (inspect). Factory: Square mark every 6000 km/6 months from 6000 km; annual check; pre-ride check (Cara Kerja Gas Tangan); dealer item (wrench: intermediate, AHASS recommended)
Replace fuel lines

Fuel and air

Factory

Manual: Fuel line (inspect). Factory: Square mark every 6000 km/6 months from 6000 km; annual check (Saluran Bahan Bakar); dealer item (wrench: intermediate, AHASS recommended)
Battery (inspect)

Ignition and electrics

Factory

Factory: Square mark every 6000 km/6 months from 6000 km; annual check (Baterai); dealer item (wrench: intermediate, AHASS recommended)
Grease and check center / side stand and springs

Rear suspension and frame

Factory

Manual: Side stand (inspect). Factory: Square mark every 6000 km/6 months from 6000 km; annual check; pre-ride check (Standar Samping)
Inspect rear shocks for leaks and damping

Rear suspension and frame

Factory

Manual: Suspension (inspect). Factory: Square mark every 6000 km/6 months from 6000 km; annual check (Suspensi); dealer item (wrench: intermediate, AHASS recommended)
Brake system (inspect)

Brakes

Factory

Factory: Square mark at 1000 km/2 months, then every 6000 km/6 months; annual check (Sistem Rem)
Check brake pads and discs

Brakes

Factory

Manual: Brake pad wear (inspect). Factory: Square mark every 6000 km/6 months from 6000 km; annual check; pre-ride check (Keausan Kampas Rem)
Inspect tire tread, sidewalls and date codes

Wheels and tires

Factory

Manual: Wheels/tires (inspect). Factory: Square mark every 6000 km/6 months from 6000 km; annual check; pre-ride check (Roda/Ban); dealer item (crossed tools: technical, service at AHASS)

Every 6,500 km or 12 months

3 items

Inspect, clean and gap spark plugs

Engine

Guideline
Inspect CVT drive belt, rollers / sliders and clutch shoes

Final drive

Guideline

Typical scooter interval. Your owner's manual figure governs; check belt width against the service limit.
Lubricate brake cam spindles, check linings and drums

Brakes

Guideline

Every 8,000 km or 12 months

1 item

Replace oil filter

Engine

Guideline

Every 9,500 km or 12 months

5 items

Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 12,000 km or 12 months

6 items

Clean oil strainers / mesh screens

Engine

Factory

Manual: Engine oil strainer screen (service). Factory: Marked at 12000/24000/36000 km (12/24/36 months) with a square mark; the source render shows P (inspect) and B (clean) as identical blank gray squares, letter not visible, so clean vs inspect cannot be read from this image (Saringan Kasa Oli Mesin); no dealer icon
Inspect coolant hoses and clamps

Engine

Factory

Manual: Cooling system (inspect). Factory: Square mark at 12000/24000/36000 km (12/24/36 months); annual check (Sistem Pendingin); dealer item (wrench: intermediate, AHASS recommended)
Nuts, bolts, fasteners (inspect)

Engine

Factory

Factory: Square mark at 1000 km/2 months, then 12000/24000/36000 km; annual check (Mur, Baut, Pengencang); dealer item (wrench: intermediate, AHASS recommended)
Replace spark plugs

Engine

Factory

Manual: Spark plug (replace). Factory: Square mark (inspect, letter not rendered) at 6000/18000/30000 km, replace (G, filled circle) at 12000/24000/36000 km (same figures in months) (Busi)
Clutch shoe wear (inspect)

Primary and gearbox

Factory

Factory: Square mark at 12000/24000/36000 km (12/24/36 months); no annual check (Keausan Kampas Kopling); dealer item (crossed tools: technical, service at AHASS)
Check steering head bearing adjustment

Front end

Factory

Manual: Steering head bearings (inspect). Factory: Square mark at 12000/24000/36000 km; annual check (Bantalan Kepala Kemudi); dealer item (crossed tools: technical, service at AHASS)

Every 16,000 km or 2 years

2 items

Compression test (or leak-down)

Engine

Guideline
Change gearbox oil

Primary and gearbox

Guideline

Every 18,000 km or 18 months

1 item

Replace air filter element

Fuel and air

Factory

Manual: Air cleaner (replace). Factory: Replace (G, filled circle) at 18000/36000 km (18/36 months); service more often if often ridden in wet or dusty areas (Saringan Udara); dealer item (wrench: intermediate, AHASS recommended)

Every 19,500 km or 2 years

2 items

Synchronize throttle bodies

Fuel and air

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 19,500 km or 3 years

1 item

Replace CVT drive belt

Final drive

Guideline

Typical scooter interval, or sooner if the belt is cracked, glazed or below its width limit.

Every 24,000 km or 2 years

3 items

Change final drive (rear drive) oil

Final drive

Factory

Manual: Final drive oil (replace). Factory: Replace (G, filled circle) at 24000 km/24 months; regular replace column '2 Tahun' (2 years); replacement requires mechanical skill (Oli Final Drive); dealer item (wrench: intermediate, AHASS recommended)
Replace drive belt (wear or damage based)

Final drive

Factory

Manual: Drive belt (replace). Factory: Square mark (inspect) at 12000 and 36000 km, replace (G, filled circle) at 24000 km/24 months; no annual check (Drive Belt); dealer item (wrench: intermediate, AHASS recommended)
Replace brake fluid

Brakes

Factory

Manual: Brake fluid (replace). Factory: Replace (G, filled circle) at 24000 km/24 months; regular replace column '2 Tahun' (2 years); square mark (inspect) at 6000/12000/18000/30000/36000 km and at annual check; pre-ride check; replacement requires mechanical skill (Minyak Rem)

Every 24,000 km or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 24,000 km

1 item

Replace brake linings / skim drums (wear based)

Brakes

Guideline

Every 32,000 km or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 36,000 km or 3 years

1 item

Replace coolant

Engine

Factory

Manual: Radiator coolant (replace). Factory: Replace (G, filled circle) at 36000 km/36 months; regular replace column '3 Tahun' (3 years); square mark (inspect) at 12000/24000 km and at annual check; pre-ride check; replacement requires mechanical skill (Cairan Pendingin Radiator)

Every 38,500 km or 4 years

1 item

Replace fuel filter

Fuel and air

Guideline

Every 40,000 km or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 48,500 km or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

2 items

Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline

Every 4 years

2 items

Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

No interval set

2 items

Ketinggian Bahan Bakar (pre-ride check)

Engine

Factory

Factory: pre-ride check only; no odometer or annual mark (Jadwal perawatan berkala, rendered from the Honda PDF in the browser; the Scoopy 2024 chart was checked: Lampu/Klakson and Ketinggian Bahan Bakar are pre-ride checks only)
Lampu/Klakson (pre-ride check)

Engine

Factory

Factory: pre-ride check only; no odometer or annual mark (Jadwal perawatan berkala, rendered from the Honda PDF in the browser; the Scoopy 2024 chart was checked: Lampu/Klakson and Ketinggian Bahan Bakar are pre-ride checks only)

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.