
Crosstourer (1237 cc)
Library entry covers 2012-2015
Published source
Honda VFR1200X Kullanım Kılavuzu 2016, 3TMGH620 (Turkey market, Turkish), Bakım Programı pp.58-60
Factory owner's handbook. Covers VFR1200X / VFR1200XD (DCT) Crosstourer; 2016 owner's manual 3TMGH620; Turkey market, Turkish.
Open the source67 items for a 2014 model, grouped by interval the way a factory chart is laid out.
How this bike is built (what the schedule is based on)
- Engine cycle
- Four-stroke
- Engine lubrication
- Wet sump (oil in crankcase)
- Oil filtration
- Replaceable cartridge or spin-on filter
- Valve gear
- Overhead cam, screw/locknut adjusters
- Ignition
- Electronic (CDI / transistor / ECU)
- Charging
- Alternator / stator with rectifier
- Battery
- Wet cell (flooded lead-acid, needs topping up)
- Fuel system
- Fuel injection
- Cooling
- Liquid cooled
- Primary drive
- Gear or chain inside engine, shares engine oil
- Gearbox oil
- Shares engine oil
- Clutch control
- Hand lever, cable
- Final drive
- Shaft
- Front suspension
- Telescopic fork
- Rear suspension
- Swingarm, single shock / cantilever
- Front brake
- Disc, hydraulic
- Rear brake
- Disc, hydraulic
- Wheels
- Cast / alloy, tubeless
- Sidecar
- No sidecar
2014 Honda Crosstourer (1237 cc)
On the road: every 200 mi
1 item-
Check engine oil levelPre-ride / on the roadGuideline
Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.
On the road: every 300 mi
2 items-
Check lights, horn, brake light switchesPre-ride / on the roadGuideline
-
Check tire pressuresPre-ride / on the roadGuideline
On the road: every 500 mi
1 item-
Check coolant levelPre-ride / on the roadGuideline
Every 3,000 mi or 12 months
3 items-
Inspect fork seals, stanchions and fork bootsFront endGuideline
-
Check footrests, pegs, rear brake and gear lever pivotsRear suspension and frameGuideline
-
Check wheel bearings for playWheels and tiresGuideline
Every 3,728 mi or 6 months
23 items-
Change engine oilEngineFactory
Manual: Engine oil (replace). Factory: Replace at 1000 km, then every 6000 km / 6 months (D at 1, 6, 12, 18, 24 x1000 km); regular replacement '6.000 KM'; also pre-ride check (Sürüş Öncesi Kontrol K) (Motor Yağı); no mile figures printed in this table
-
Engine idle speed (inspect)EngineFactory
Factory: Inspect at 1000 km, then every 6000 km / 6 months (K at 1, 6, 12, 18, 24 x1000 km; month row 6/12/18/24) (Motor Rölanti Devri); no mile figures printed in this table
-
Headlight aim (inspect)EngineFactory
Factory: Inspect every 6000 km / 6 months (K at 6, 12, 18, 24 x1000 km; month row 6/12/18/24); no 1000 km mark (Far Yüksekliği); no mile figures printed in this table
-
Horn and lights (inspect)EngineFactory
Factory: Inspect at 1000 km, then every 6000 km / 6 months (K at 1, 6, 12, 18, 24 x1000 km; month row 6/12/18/24); also pre-ride check (Sürüş Öncesi Kontrol K) (Korna ve Lambalar); no mile figures printed in this table
-
Instrument panel (inspect)EngineFactory
Factory: Inspect at 1000 km, then every 6000 km / 6 months (K at 1, 6, 12, 18, 24 x1000 km; month row 6/12/18/24); also pre-ride check (Sürüş Öncesi Kontrol K) (Gösterge Paneli); no mile figures printed in this table
-
Keys and locks (inspect)EngineFactory
Factory: Inspect at 1000 km, then every 6000 km / 6 months (K at 1, 6, 12, 18, 24 x1000 km; month row 6/12/18/24); also pre-ride check (Sürüş Öncesi Kontrol K) (Anahtar ve Kilitler); no mile figures printed in this table
-
Replace oil filterEngineFactory
Manual: Engine oil filter (replace). Factory: Replace at 1000 km, then every 6000 km / 6 months (D at 1, 6, 12, 18, 24 x1000 km); regular replacement '6.000 KM' (Motor Yağı Filtresi); no mile figures printed in this table
-
Switches (inspect)EngineFactory
Factory: Inspect at 1000 km, then every 6000 km / 6 months (K at 1, 6, 12, 18, 24 x1000 km; month row 6/12/18/24); also pre-ride check (Sürüş Öncesi Kontrol K) (Sviçler); no mile figures printed in this table
-
Test rideEngineFactory
Factory: At 1000 km, then every 6000 km / 6 months (K at 1, 6, 12, 18, 24 x1000 km) (Test Sürüşü); no mile figures printed in this table
-
Check throttle cable(s) free play and returnFuel and airFactory
Manual: Throttle operation (inspect). Factory: Inspect every 6000 km / 6 months (K at 6, 12, 18, 24 x1000 km; month row 6/12/18/24); no 1000 km mark (Gaz Kolunun Çalışması); no mile figures printed in this table
-
Fuel level (inspect)Fuel and airFactory
Factory: Inspect at 1000 km, then every 6000 km / 6 months (K at 1, 6, 12, 18, 24 x1000 km; month row 6/12/18/24); also pre-ride check (Sürüş Öncesi Kontrol K) (Yakıt Seviyesi); no mile figures printed in this table
-
Replace fuel linesFuel and airFactory
Manual: Fuel line (inspect). Factory: Inspect every 6000 km / 6 months (K at 6, 12, 18, 24 x1000 km; month row 6/12/18/24); no 1000 km mark (Yakıt Hattı); no mile figures printed in this table
-
Battery (inspect)Ignition and electricsFactory
Factory: Inspect at 1000 km, then every 6000 km / 6 months (K at 1, 6, 12, 18, 24 x1000 km; month row 6/12/18/24) (Akü); no mile figures printed in this table
-
Clutch system (inspect)Primary and gearboxFactory
Factory: Inspect at 1000 km, then every 6000 km / 6 months (K at 1, 6, 12, 18, 24 x1000 km; month row 6/12/18/24); also pre-ride check (Sürüş Öncesi Kontrol K) (Debriyaj Sistemi); no model restriction printed; no mile figures printed in this table
-
DCT transmission oil filter (replace)Primary and gearboxFactory
Factory: VFR1200XD (DCT) only, note *5: replace at 1000 km, then every 6000 km / 6 months (D at 1, 6, 12, 18, 24 x1000 km); regular replacement '6.000 KM' (Şanzıman Yağı Filtresi); the label 'VFR1200XD' is printed in the x1.000 km cell of this row; no mile figures printed in this table
-
Grease and check center / side stand and springsRear suspension and frameFactory
Manual: Side stand (inspect). Factory: Inspect at 1000 km, then every 6000 km / 6 months (K at 1, 6, 12, 18, 24 x1000 km; month row 6/12/18/24); also pre-ride check (Sürüş Öncesi Kontrol K) (Yan Ayak); no mile figures printed in this table
-
Inspect rear shocks for leaks and dampingRear suspension and frameFactory
Manual: Suspension (inspect). Factory: Inspect every 6000 km / 6 months (K at 6, 12, 18, 24 x1000 km; month row 6/12/18/24); no 1000 km mark (Süspansiyon); no mile figures printed in this table
-
Brake discs (inspect)BrakesFactory
Factory: Inspect at 1000 km, then every 6000 km / 6 months (K at 1, 6, 12, 18, 24 x1000 km; month row 6/12/18/24); also pre-ride check (Sürüş Öncesi Kontrol K) (Fren Diskleri); no mile figures printed in this table
-
Brake system (inspect)BrakesFactory
Factory: Inspect at 1000 km, then every 6000 km / 6 months (K at 1, 6, 12, 18, 24 x1000 km; month row 6/12/18/24); also pre-ride check (Sürüş Öncesi Kontrol K) (Fren Sistemi); no mile figures printed in this table
-
Check brake pads and discsBrakesFactory
Manual: Brake pads (inspect). Factory: Inspect at 1000 km, then every 6000 km / 6 months (K at 1, 6, 12, 18, 24 x1000 km; month row 6/12/18/24); also pre-ride check (Sürüş Öncesi Kontrol K) (Fren Balataları); no mile figures printed in this table
-
Parking brake lock (inspect)BrakesFactory
Factory: VFR1200XD (DCT) only, note *5: Inspect at 1000 km, then every 6000 km / 6 months (K at 1, 6, 12, 18, 24 x1000 km; month row 6/12/18/24); also pre-ride check (Sürüş Öncesi Kontrol K) (Fren Kilidi); the label 'VFR1200XD' is printed in the x1.000 km cell of this row; no mile figures printed in this table
-
Inspect tire tread, sidewalls and date codesWheels and tiresFactory
Manual: Wheels and tires (inspect). Factory: Inspect at 1000 km, then every 6000 km / 6 months (K at 1, 6, 12, 18, 24 x1000 km; month row 6/12/18/24); also pre-ride check (Sürüş Öncesi Kontrol K) (Tekerlek ve Lastik); no mile figures printed in this table
-
Tire pressure (inspect)Wheels and tiresFactory
Factory: Inspect at 1000 km, then every 6000 km / 6 months (K at 1, 6, 12, 18, 24 x1000 km; month row 6/12/18/24); also pre-ride check (Sürüş Öncesi Kontrol K) (Lastik Basıncı); no mile figures printed in this table
Every 4,000 mi or 12 months
2 items-
Inspect, clean and gap spark plugsEngineGuideline
-
Adjust clutch free play, lubricate cable and lever pivotPrimary and gearboxGuideline
Every 6,000 mi or 12 months
6 items-
Clean / inspect air filterFuel and airGuideline
Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
-
Check charging voltage and regulator / cut-outIgnition and electricsGuideline
-
Check final drive for leaks and bearing playFinal driveGuideline
-
Check swingarm bushes for playRear suspension and frameGuideline
-
Lubricate control cables and lever pivotsControls and cablesGuideline
-
Lubricate speedometer / tachometer cables, check driveControls and cablesGuideline
A dry speedo cable whips the needle and eventually kills the instrument.
Every 7,456 mi or 12 months
4 items-
Fasteners (inspect)EngineFactory
Factory: Inspect at 1000 km, then at 12000 and 24000 km (K at 1, 12, 24 x1000 km) (Bağlantı Elemanları); no mile figures printed in this table
-
Inspect coolant hoses and clampsEngineFactory
Manual: Cooling system (inspect). Factory: Inspect every 12000 km / 12 months (K at 12 and 24 x1000 km) (Soğutma Sistemi); no mile figures printed in this table
-
Secondary air supply system (inspect)EngineFactory
Factory: Inspect every 12000 km / 12 months (K at 12 and 24 x1000 km) (Ek Hava Besleme Sistemi); no mile figures printed in this table
-
Check steering head bearing adjustmentFront endFactory
Manual: Steering head (inspect). Factory: Inspect every 12000 km / 12 months (K at 12 and 24 x1000 km) (Gidon Gövdesi, literally 'handlebar body/stem'; mapped to steering head); no mile figures printed in this table
Every 10,000 mi or 2 years
1 item-
Compression test (or leak-down)EngineGuideline
Every 12,000 mi or 2 years
3 items-
Synchronize throttle bodiesFuel and airGuideline
-
Clean and grease rear suspension linkageRear suspension and frameGuideline
-
Grease swingarm pivotRear suspension and frameGuideline
Every 14,913 mi or 2 years
2 items-
Check and adjust valve clearancesEngineFactory
Manual: Valve clearance (inspect). Factory: Inspect at 24000 km / 24 months only in the 1-24k table (Subap Boşluğu); no mile figures printed in this table
-
Evaporative emission control system (inspect)Controls and cablesFactory
Factory: Inspect at 24000 km / 24 months only in the 1-24k table (Buharlaşmalı Emisyon Kontrol Sistemi); no model restriction printed; no mile figures printed in this table
Every 14,913 mi
1 item-
Replace air filter elementFuel and airFactory
Manual: Air cleaner (replace). Factory: Inspect every 6000 km / 6 months (K at 6-24 x1000 km); regular replacement every 24000 km (Düzenli Değişim '24.000 KM') (Hava Filtresi); general intro says service more often in very wet or dusty conditions; no mile figures printed in this table
Every 20,000 mi or 4 years
3 items-
Lubricate drive shaft splines / check U-jointFinal driveGuideline
-
Repack / replace steering head bearingsFront endGuideline
Many old machines use loose balls in cups and cones. Taper roller conversions are common.
-
Repack / replace wheel bearingsWheels and tiresGuideline
Cup-and-cone and taper roller hubs need periodic repacking and adjustment.
Every 24,000 mi or 4 years
1 item-
Replace fuel filterFuel and airGuideline
Every 25,000 mi or 6 years
1 item-
Replace swingarm bushes / bearingsRear suspension and frameGuideline
Every 29,826 mi
1 item-
Replace spark plugsEngineFactory
Manual: Spark plug (replace). Factory: Inspect at 12000 and 24000 km (K); regular replacement every 48000 km (Düzenli Değişim '48.000 KM') (Buji); no mile figures printed in this table
Every 30,000 mi or 6 years
1 item-
Rebuild forks: seals, bushes, springsFront endGuideline
Every 6 months
1 item-
Clean battery terminals, check charge and strapIgnition and electricsGuideline
Every 2 years
6 items-
Inspect wiring, bullet connectors and ground pointsIgnition and electricsGuideline
-
Replace hydraulic clutch fluidPrimary and gearboxFactory
Manual: Clutch fluid (replace). Factory: VFR1200X (manual clutch) only, note *4: replace every 2 years (Düzenli Değişim '24 AY'); inspect at 1000 km then every 6000 km / 6 months; also pre-ride check (Sürüş Öncesi Kontrol K) (Debriyaj Hidroliği); the label 'VFR1200X' is printed in the x1.000 km cell of this row; no mile figures printed in this table
-
Change final drive (rear drive) oilFinal driveFactory
Manual: Final drive (reduction gear) oil (replace). Factory: Regular replacement every 2 years ('24 AY'); no distance marks (Redüksiyon Yağı); no mile figures printed in this table
-
Change fork oilFront endFactory
Manual: Front fork oil (replace). Factory: Regular replacement every 2 years ('24 AY'); no distance marks (Ön Amortisör Hidroliği); no mile figures printed in this table
-
Inspect frame, welds and lugs for cracksRear suspension and frameGuideline
-
Replace brake fluidBrakesFactory
Manual: Brake fluid (replace). Factory: Replace every 2 years (Düzenli Değişim '24 AY'); inspect at 1000 km then every 6000 km / 6 months; also pre-ride check (Sürüş Öncesi Kontrol K) (Fren Hidroliği); no mile figures printed in this table
Every 3 years
1 item-
Replace coolantEngineFactory
Manual: Coolant (replace). Factory: Replace every 3 years (Düzenli Değişim '36 AY'); inspect at 1000 km then every 6000 km / 6 months; also pre-ride check (Sürüş Öncesi Kontrol K) (Soğutma Sıvısı); no mile figures printed in this table
Every 4 years
2 items-
Inspect brake hoses; replace old rubberBrakesGuideline
-
Rebuild calipers and master cylinders (seals)BrakesGuideline
Every 6 years
1 item-
Replace tires on age (regardless of tread)Wheels and tiresGuideline
Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.
Keep up with this schedule on your phone
Add the bike in the app and this chart loads itself, ready to log against and edit.




