Elite (125 cc)
Library entry covers 1985-2022
Published source
Honda Elite 125 (SCV125SR) Manual del Propietario 2024, 35K1JQ00 (Argentina market, Spanish), Programa de mantenimiento pp.51-52
Factory owner's handbook. Covers SCV125SR Elite 125; 2024 owner's manual 35K1JQ00; Argentina market, Spanish. Note: the catalog row spans 1985-2022; this schedule is from the 2024 Argentine manual.
Open the source60 items for a 2006 model, grouped by interval the way a factory chart is laid out.
How this bike is built (what the schedule is based on)
- Engine cycle
- Four-stroke
- Engine lubrication
- Wet sump (oil in crankcase)
- Oil filtration
- Replaceable cartridge or spin-on filter
- Valve gear
- Overhead cam, screw/locknut adjusters
- Ignition
- Electronic (CDI / transistor / ECU)
- Charging
- Alternator / stator with rectifier
- Battery
- Wet cell (flooded lead-acid, needs topping up)
- Fuel system
- Single carburetor
- Cooling
- Air / oil cooled
- Primary drive
- Gear or chain inside engine, shares engine oil
- Gearbox oil
- Separate gearbox oil
- Clutch control
- Automatic or semi-automatic
- Final drive
- Belt CVT, scooter automatic
- Front suspension
- Telescopic fork
- Rear suspension
- Swingarm, twin shocks
- Front brake
- Disc, hydraulic
- Rear brake
- Drum (or band / belt rim)
- Wheels
- Cast / alloy, tubeless
- Sidecar
- No sidecar
2006 Honda Elite (125 cc)
On the road: every 200 mi
1 item-
Check engine oil levelPre-ride / on the roadGuideline
Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.
On the road: every 300 mi
2 items-
Check lights, horn, brake light switchesPre-ride / on the roadGuideline
-
Check tire pressuresPre-ride / on the roadGuideline
Every 1,000 mi or 6 months
1 item-
Adjust rear drum brake and rod / cable linkageBrakesGuideline
Every 3,000 mi or 12 months
5 items-
Clean fuel tap filter / sediment bowlFuel and airGuideline
-
Adjust automatic / semi-automatic clutchPrimary and gearboxGuideline
-
Inspect fork seals, stanchions and fork bootsFront endGuideline
-
Check footrests, pegs, rear brake and gear lever pivotsRear suspension and frameGuideline
-
Check wheel bearings for playWheels and tiresGuideline
Every 4,000 mi or 12 months
14 items-
Change engine oilEngineFactory
Manual: Engine oil (replace). Factory: Replace at 1000 km initial, then every 6000 km; annual replace; also pre-ride check (Aceite del motor)
-
Engine idle speed (inspect)EngineFactory
Factory: Inspect at 1000 km, then every 6000 km; annual check (Velocidad de ralentí del motor); dealer item (intermediate)
-
Headlight aim (inspect)EngineFactory
Factory: Inspect every 6000 km; annual check (Reglaje del faro)
-
Inspect, clean and gap spark plugsEngineGuideline
-
Check throttle cable(s) free play and returnFuel and airFactory
Manual: Throttle operation (inspect). Factory: Inspect every 6000 km; annual check; also pre-ride check (Funcionamiento del acelerador); dealer item (intermediate)
-
Replace fuel linesFuel and airFactory
Manual: Fuel line (inspect). Factory: Inspect every 6000 km; annual check (Tubería del combustible); dealer item (intermediate)
-
Battery (inspect)Ignition and electricsFactory
Factory: Inspect every 6000 km; annual check (Batería); dealer item (intermediate)
-
Inspect CVT drive belt, rollers / sliders and clutch shoesFinal driveGuideline
Typical scooter interval. Your owner's manual figure governs; check belt width against the service limit.
-
Grease and check center / side stand and springsRear suspension and frameFactory
Manual: Side stand (inspect). Factory: Inspect every 6000 km; annual check; also pre-ride check (Caballete lateral)
-
Inspect rear shocks for leaks and dampingRear suspension and frameFactory
Manual: Suspension (inspect). Factory: Inspect every 6000 km; annual check (Suspensión); dealer item (intermediate)
-
Brake system (inspect)BrakesFactory
Factory: Inspect at 1000 km, then every 6000 km; annual check; also pre-ride check (Sistema de frenos)
-
Check brake pads and discsBrakesFactory
Manual: Brake shoes/pads wear (inspect). Factory: Inspect every 6000 km; annual check; also pre-ride check (Desgaste de las zapatas/pastillas de freno)
-
Lubricate brake cam spindles, check linings and drumsBrakesGuideline
-
Inspect tire tread, sidewalls and date codesWheels and tiresFactory
Manual: Wheels/tires (inspect). Factory: Inspect every 6000 km; annual check; also pre-ride check (Ruedas/neumáticos); dealer item (technical)
Every 4,000 mi
4 items-
Check and adjust valve clearancesEngineFactory
Manual: Valve clearance (inspect). Factory: Inspect every 6000 km (6000-36000 km) (Holgura de las válvulas); dealer item (intermediate)
-
Check engine breather and oil returnEngineFactory
Manual: Crankcase breather (clean). Factory: Clean every 6000 km; more often in rain or at full throttle (Respiradero del cárter)
-
Honda diagnostic system (inspect)EngineFactory
Factory: Inspect at 1000 km (0.6k mi), then every 6000 km (4000 mi) to 36000 km (Sistema de diagnóstico de Honda); dealer item (technical)
-
Brake lock operation (inspect)BrakesFactory
Factory: Inspect every 6000 km; no annual mark (Funcionamiento del bloqueo del freno); dealer item (intermediate)
Every 5,000 mi or 12 months
1 item-
Replace oil filterEngineGuideline
Every 6,000 mi or 12 months
6 items-
Clean / inspect air filterFuel and airGuideline
Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
-
Clean carburetor float bowl(s), check float level and jetsFuel and airGuideline
Ethanol fuel varnishes old carbs quickly in storage.
-
Check charging voltage and regulator / cut-outIgnition and electricsGuideline
-
Check swingarm bushes for playRear suspension and frameGuideline
-
Lubricate control cables and lever pivotsControls and cablesGuideline
-
Lubricate speedometer / tachometer cables, check driveControls and cablesGuideline
A dry speedo cable whips the needle and eventually kills the instrument.
Every 8,000 mi or 12 months
2 items-
Nuts, bolts, fasteners (inspect)EngineFactory
Factory: Inspect at 1000 km, then at 12000/24000/36000 km; annual check (Tuercas, pernos y elementos de sujeción); dealer item (intermediate)
-
Check steering head bearing adjustmentFront endFactory
Manual: Steering head bearings (inspect). Factory: Inspect at 12000, 24000, 36000 km; annual check (Cojinetes del cabezal de la dirección); dealer item (technical)
Every 8,000 mi
3 items-
Clean oil strainers / mesh screensEngineFactory
Manual: Engine oil strainer screen (clean). Factory: Clean at 12000, 24000, 36000 km (Filtro tamiz del aceite del motor)
-
Replace spark plugsEngineFactory
Manual: Spark plug (replace). Factory: Inspect at 6000/18000/30000 km, replace at 12000/24000/36000 km (Bujía)
-
Clutch shoes wear (inspect)Primary and gearboxFactory
Factory: Inspect at 12000, 24000, 36000 km (Desgaste de las zapatas del embrague); dealer item (technical)
Every 10,000 mi or 2 years
2 items-
Compression test (or leak-down)EngineGuideline
-
Change gearbox oilPrimary and gearboxGuideline
Every 12,000 mi or 2 years
1 item-
Grease swingarm pivotRear suspension and frameGuideline
Every 12,000 mi or 3 years
1 item-
Replace CVT drive beltFinal driveGuideline
Typical scooter interval, or sooner if the belt is cracked, glazed or below its width limit.
Every 12,000 mi
2 items-
Replace air filter elementFuel and airFactory
Manual: Air cleaner (replace). Factory: Replace at 18000 and 36000 km; service more often in wet or dusty areas (Filtro de aire); dealer item (intermediate)
-
Evaporative emission control system (inspect)Controls and cablesFactory
Factory: Inspect at 18000 and 36000 km (Sistema de control de emisiones de vapor de combustible); dealer item (intermediate)
Every 15,000 mi or 3 years
1 item-
Change fork oilFront endGuideline
Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.
Every 15,000 mi
1 item-
Replace brake linings / skim drums (wear based)BrakesGuideline
Every 16,000 mi
1 item-
Replace drive belt (wear or damage based)Final driveFactory
Manual: Drive belt (replace). Factory: Inspect at 12000 and 36000 km, replace at 24000 km (Correa de transmisión); dealer item (intermediate)
Every 20,000 mi or 4 years
2 items-
Repack / replace steering head bearingsFront endGuideline
Many old machines use loose balls in cups and cones. Taper roller conversions are common.
-
Repack / replace wheel bearingsWheels and tiresGuideline
Cup-and-cone and taper roller hubs need periodic repacking and adjustment.
Every 25,000 mi or 6 years
1 item-
Replace swingarm bushes / bearingsRear suspension and frameGuideline
Every 30,000 mi or 6 years
1 item-
Rebuild forks: seals, bushes, springsFront endGuideline
Every 6 months
1 item-
Clean battery terminals, check charge and strapIgnition and electricsGuideline
Every 2 years
4 items-
Inspect wiring, bullet connectors and ground pointsIgnition and electricsGuideline
-
Change final drive (rear drive) oilFinal driveFactory
Manual: Final drive oil (replace). Factory: Replace every 2 years; replacement requires mechanical skill (Aceite del grupo final); dealer item (intermediate)
-
Inspect frame, welds and lugs for cracksRear suspension and frameGuideline
-
Replace brake fluidBrakesFactory
Manual: Brake fluid (replace). Factory: Replace every 2 years; inspect every 6000 km and annually; also pre-ride check; replacement requires mechanical skill (Líquido de frenos)
Every 4 years
2 items-
Inspect brake hoses; replace old rubberBrakesGuideline
-
Rebuild calipers and master cylinders (seals)BrakesGuideline
Every 6 years
1 item-
Replace tires on age (regardless of tread)Wheels and tiresGuideline
Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.
Keep up with this schedule on your phone
Add the bike in the app and this chart loads itself, ready to log against and edit.




