MotoService Log
Honda Genio (110 cc)
Example photo: オーバードライブ83, CC BY-SA 4.0, Wikimedia Commons
Honda · Overhead-cam four-stroke single, wet sump, separate gearbox oil, CVT belt drive

Genio (110 cc)

Library entry covers 2022-2023

25 factory 36 guideline

Published source

Honda Genio Buku Pedoman Pemilik 2025, BPPG_K0JJ (Indonesian, Indonesia market), Jadwal Perawatan Berkala pp.51-52

Factory owner's handbook. Covers Genio (K0J frame code per manual file BPPG_K0JJ); 2025 owner's manual (Buku Pedoman Pemilik); Indonesia market, Indonesian. Indonesian table gives km and month (Bulan) per column; no mile figures printed.

61 items for a 2022 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)
Engine cycle
Four-stroke
Engine lubrication
Wet sump (oil in crankcase)
Oil filtration
Replaceable cartridge or spin-on filter
Valve gear
Overhead cam, screw/locknut adjusters
Ignition
Electronic (CDI / transistor / ECU)
Charging
Alternator / stator with rectifier
Battery
Wet cell (flooded lead-acid, needs topping up)
Fuel system
Fuel injection
Cooling
Air / oil cooled
Primary drive
Gear or chain inside engine, shares engine oil
Gearbox oil
Separate gearbox oil
Clutch control
Automatic or semi-automatic
Final drive
Belt CVT, scooter automatic
Front suspension
Telescopic fork
Rear suspension
Swingarm, single shock / cantilever
Front brake
Disc, hydraulic
Rear brake
Drum (or band / belt rim)
Wheels
Cast / alloy, tubeless
Sidecar
No sidecar
Maintenance schedule

2022 Honda Genio (110 cc)

On the road: every 300 km

1 item
  • Check engine oil level
    Pre-ride / on the road
    Guideline

    Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

2 items
  • Check lights, horn, brake light switches
    Pre-ride / on the road
    Guideline
  • Check tire pressures
    Pre-ride / on the road
    Guideline

Every 1,600 km or 6 months

1 item
  • Adjust rear drum brake and rod / cable linkage
    Brakes
    Guideline

Every 4,000 km or 4 months

14 items
  • Change engine oil
    Engine
    Factory

    Manual: Engine oil (replace). Factory: Replace (G) at 1000 km/2 months initial, then every 4000 km/4 months; annual check replace (Oli Mesin); pre-ride check

  • Check and adjust valve clearances
    Engine
    Factory

    Manual: Valve clearance (inspect). Factory: Inspect every 4000 km/4 months from 4000 km; intermediate (wrench) item (Jarak Renggang Klep)

  • Check engine breather and oil return
    Engine
    Factory

    Manual: Crankcase breather (clean). Factory: Clean (B) every 4000 km/4 months from 4000 km; service more often in rain or at high speed (Pernapasan Bak Mesin)

  • Engine idle speed (inspect)
    Engine
    Factory

    Factory: Inspect at 1000 km/2 months, then every 4000 km/4 months; annual check; intermediate (wrench) item (Putaran Stasioner Mesin)

  • Headlight aim (inspect)
    Engine
    Factory

    Factory: Inspect every 4000 km/4 months from 4000 km; annual check (Arah Sinar Lampu Depan)

  • Check throttle cable(s) free play and return
    Fuel and air
    Factory

    Manual: Throttle operation (inspect). Factory: Inspect every 4000 km/4 months from 4000 km; annual check; pre-ride check; intermediate (wrench) item (Cara Kerja Gas Tangan)

  • Replace fuel lines
    Fuel and air
    Factory

    Manual: Fuel line (inspect). Factory: Inspect every 4000 km/4 months from 4000 km; annual check; intermediate (wrench) item (Saluran Bahan Bakar)

  • Battery (inspect)
    Ignition and electrics
    Factory

    Factory: Inspect every 4000 km/4 months from 4000 km; annual check; intermediate (wrench) item; row labelled 'Baterai (CBS ISS)' (variant)

  • Grease and check center / side stand and springs
    Rear suspension and frame
    Factory

    Manual: Side stand (inspect). Factory: Inspect every 4000 km/4 months from 4000 km; annual check; pre-ride check (Standar Samping)

  • Inspect rear shocks for leaks and damping
    Rear suspension and frame
    Factory

    Manual: Suspension (inspect). Factory: Inspect every 4000 km/4 months from 4000 km; annual check; intermediate (wrench) item (Suspensi)

  • Brake lock operation (inspect)
    Brakes
    Factory

    Factory: Inspect every 4000 km/4 months from 4000 km; no annual check; intermediate (wrench) item (Cara Kerja Kunci Rem)

  • Brake system (inspect)
    Brakes
    Factory

    Factory: Inspect at 1000 km/2 months, then every 4000 km/4 months; annual check; pre-ride check (Sistem Rem)

  • Check brake pads and discs
    Brakes
    Factory

    Manual: Brake pad/shoe wear (inspect). Factory: Inspect every 4000 km/4 months from 4000 km; annual check; pre-ride check (Keausan Kampas Rem)

  • Inspect tire tread, sidewalls and date codes
    Wheels and tires
    Factory

    Manual: Wheels/tires (inspect). Factory: Inspect every 4000 km/4 months from 4000 km; annual check; pre-ride check; technical (crossed tools) dealer item (Roda/Ban)

Every 5,000 km or 12 months

4 items
  • Adjust automatic / semi-automatic clutch
    Primary and gearbox
    Guideline
  • Inspect fork seals, stanchions and fork boots
    Front end
    Guideline
  • Check footrests, pegs, rear brake and gear lever pivots
    Rear suspension and frame
    Guideline
  • Check wheel bearings for play
    Wheels and tires
    Guideline

Every 6,500 km or 12 months

3 items
  • Inspect, clean and gap spark plugs
    Engine
    Guideline
  • Inspect CVT drive belt, rollers / sliders and clutch shoes
    Final drive
    Guideline

    Typical scooter interval. Your owner's manual figure governs; check belt width against the service limit.

  • Lubricate brake cam spindles, check linings and drums
    Brakes
    Guideline

Every 8,000 km or 8 months

4 items
  • Nuts, bolts, fasteners (inspect)
    Engine
    Factory

    Factory: Inspect at 1000 km/2 months, then 8000/16000/24000/32000/40000/48000 km; annual check; intermediate (wrench) item (Mur, Baut, Pengencang)

  • Replace spark plugs
    Engine
    Factory

    Manual: Spark plug (replace). Factory: Inspect (P) at 4000/12000/20000/28000/36000/44000 km, replace (G) at 8000/16000/24000/32000/40000/48000 km (Busi)

  • Clutch shoes wear (inspect)
    Primary and gearbox
    Factory

    Factory: Inspect at 8000/16000/24000/32000/40000/48000 km; technical (crossed tools) dealer item (Keausan Kampas Kopling)

  • Change final drive (rear drive) oil
    Final drive
    Factory

    Manual: Final drive oil (replace). Factory: Replace (G) at 8000/16000/24000/32000/40000/48000 km (8/16/.../48 months); replacement requires mechanical skill; intermediate (wrench) item (Oli Final Drive)

Every 8,000 km or 12 months

1 item
  • Replace oil filter
    Engine
    Guideline

Every 9,500 km or 12 months

5 items
  • Clean / inspect air filter
    Fuel and air
    Guideline

    Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.

  • Check charging voltage and regulator / cut-out
    Ignition and electrics
    Guideline
  • Check swingarm bushes for play
    Rear suspension and frame
    Guideline
  • Lubricate control cables and lever pivots
    Controls and cables
    Guideline
  • Lubricate speedometer / tachometer cables, check drive
    Controls and cables
    Guideline

    A dry speedo cable whips the needle and eventually kills the instrument.

Every 12,000 km or 12 months

2 items
  • Clean oil strainers / mesh screens
    Engine
    Factory

    Manual: Engine oil strainer screen (clean). Factory: Clean (B) at 12000/24000/36000/48000 km (12/24/36/48 months) (Saringan Kasa Oli Mesin)

  • Check steering head bearing adjustment
    Front end
    Factory

    Manual: Steering head bearings (inspect). Factory: Inspect at 12000/24000/36000/48000 km; annual check; technical (crossed tools) dealer item (Bantalan Kepala Kemudi)

Every 16,000 km or 16 months

1 item
  • Replace air filter element
    Fuel and air
    Factory

    Manual: Air cleaner (replace). Factory: Replace (G) at 16000/32000/48000 km (16/32/48 months); service more often in very wet or dusty areas; intermediate (wrench) item (Saringan Udara)

Every 16,000 km or 2 years

2 items
  • Compression test (or leak-down)
    Engine
    Guideline
  • Change gearbox oil
    Primary and gearbox
    Guideline

Every 19,500 km or 2 years

3 items
  • Synchronize throttle bodies
    Fuel and air
    Guideline
  • Clean and grease rear suspension linkage
    Rear suspension and frame
    Guideline
  • Grease swingarm pivot
    Rear suspension and frame
    Guideline

Every 19,500 km or 3 years

1 item
  • Replace CVT drive belt
    Final drive
    Guideline

    Typical scooter interval, or sooner if the belt is cracked, glazed or below its width limit.

Every 24,000 km or 2 years

2 items
  • Replace drive belt (wear or damage based)
    Final drive
    Factory

    Manual: Drive belt (replace). Factory: Inspect (P) at 8000/16000/32000/40000 km, replace (G) at 24000/48000 km (24/48 months); intermediate (wrench) item

  • Replace brake fluid
    Brakes
    Factory

    Manual: Brake fluid (replace). Factory: Replace (G) at 24000/48000 km (24/48 months); regular replace column '2 tahun' (2 years); inspect (P) every 4000 km/4 months otherwise; annual check; pre-ride check; replacement requires mechanical skill (Minyak Rem)

Every 24,000 km or 3 years

1 item
  • Change fork oil
    Front end
    Guideline

    Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 24,000 km

1 item
  • Replace brake linings / skim drums (wear based)
    Brakes
    Guideline

Every 32,000 km or 4 years

2 items
  • Repack / replace steering head bearings
    Front end
    Guideline

    Many old machines use loose balls in cups and cones. Taper roller conversions are common.

  • Repack / replace wheel bearings
    Wheels and tires
    Guideline

    Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 38,500 km or 4 years

1 item
  • Replace fuel filter
    Fuel and air
    Guideline

Every 40,000 km or 6 years

1 item
  • Replace swingarm bushes / bearings
    Rear suspension and frame
    Guideline

Every 48,500 km or 6 years

1 item
  • Rebuild forks: seals, bushes, springs
    Front end
    Guideline

Every 6 months

1 item
  • Clean battery terminals, check charge and strap
    Ignition and electrics
    Guideline

Every 2 years

2 items
  • Inspect wiring, bullet connectors and ground points
    Ignition and electrics
    Guideline
  • Inspect frame, welds and lugs for cracks
    Rear suspension and frame
    Guideline

Every 4 years

2 items
  • Inspect brake hoses; replace old rubber
    Brakes
    Guideline
  • Rebuild calipers and master cylinders (seals)
    Brakes
    Guideline

Every 6 years

1 item
  • Replace tires on age (regardless of tread)
    Wheels and tires
    Guideline

No interval set

2 items
  • Ketinggian Bahan Bakar (pre-ride check)
    Engine
    Factory

    Factory: pre-ride check only; no odometer or annual mark (Jadwal perawatan berkala, rendered from the Honda PDF in the browser; the Scoopy 2024 chart was checked: Lampu/Klakson and Ketinggian Bahan Bakar are pre-ride checks only)

  • Lampu/Klakson (pre-ride check)
    Engine
    Factory

    Factory: pre-ride check only; no odometer or annual mark (Jadwal perawatan berkala, rendered from the Honda PDF in the browser; the Scoopy 2024 chart was checked: Lampu/Klakson and Ketinggian Bahan Bakar are pre-ride checks only)

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.

Keep up with this schedule on your phone

Add the bike in the app and this chart loads itself, ready to log against and edit.

Coming soon to Google Play

Other 2022 Honda models

All 2022 Honda