Honda Integra (745 cc) — Example photo: Bull-Doser, Public domain, Wikimedia Commons

Have this bike? Send a photo or the manual's service chart

Honda · Overhead-cam four-stroke twin, wet sump, gearbox shares engine oil, chain drive

Integra (745 cc)

Library entry covers 2012-2020

36 factory 32 guideline

Published source

Honda Integra Kullanım Kılavuzu 2018, 3TMKL700 (Turkey market, Turkish), Bakım Programı pp.71-74 (Europe direct sales/Singapore/Hong Kong/Macao/Korea/Turkey table pp.71-72; Gulf countries table pp.73-74)

Factory owner's handbook. Covers Integra (DCT); 2018 owner's manual 3TMKL700; Turkey market, Turkish. Manual has two tables: 'Avrupa direkt satışları, Singapur, Hong Kong, Macao, Kore, Türkiye' (pp.71-72, transcribed here) and 'Körfez Ülkeleri' (Gulf countries, pp.73-74, differences noted in detail).

68 items for a 2017 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, screw/locknut adjusters
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Liquid cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Shares engine oil
Clutch control: Automatic or semi-automatic
Final drive: Chain
Front suspension: Telescopic fork
Rear suspension: Swingarm, single shock / cantilever
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

2017 Honda Integra (745 cc)

On the road: every 300 km

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

On the road: every 800 km

1 item

Check coolant level

Pre-ride / on the road

Guideline

On the road: every 1,000 km

2 items

Check chain slack and rear wheel alignment

Pre-ride / on the road

Factory

Manual: Drive chain (inspect). Factory: Every 1000 km (600 mi): inspect and lubricate ('Her 1.000 km (600 mi): K, Y'); also pre-ride check (Tahrik Zinciri); same in Gulf table
Lubricate drive chain

Pre-ride / on the road

Factory

Manual: Drive chain (inspect and lubricate). Factory: Every 1000 km (600 mi): inspect and lubricate ('Her 1.000 km (600 mi): K, Y'); also pre-ride check (Tahrik Zinciri); same in Gulf table

Every 5,000 km or 12 months

6 items

Adjust automatic / semi-automatic clutch

Primary and gearbox

Guideline
Clean drive chain thoroughly (remove and soak, re-lube)

Final drive

Guideline

Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.
Inspect chain and sprockets for wear (measure stretch)

Final drive

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 6,000 km or 12 months

2 items

Change engine oil

Engine

Factory

Manual: Engine oil (replace). Factory: Replace at 1000 km initial, then every 6000 km ('Her 6.000 km'de bir: D'); annual replace; also pre-ride check (Motor Yağı); no mile figure printed for this interval. Gulf table: replace at 1000 km, then 12000/24000/36000 km, annual replace
Inspect tire tread, sidewalls and date codes

Wheels and tires

Factory

Manual: Wheels/tires (inspect). Factory: Inspect every 6000 km ('Her 6.000 km'de bir: K'); annual check; also pre-ride check (Lastikler / Tekerlekler); dealer item (technical); no mile figure printed for this interval. Gulf table: every 12000 km

Every 6,000 km

3 items

Lights/horn (inspect)

Engine

Factory

Factory: Inspect every 6000 km ('Her 6.000 km'de bir: K'); no annual mark and no pre-ride mark in this table (Lambalar/Korna); no mile figure printed for this interval. Gulf table: pre-ride check only
Replace oil filter

Engine

Factory

Manual: Engine oil filter (replace). Factory: Replace at 1000 km initial, then every 6000 km ('Her 6.000 km'de bir: D'); no annual mark (Motor Yağı Filtresi); no mile figure printed for this interval. Gulf table: replace at 1000 and 24000 km
Battery (inspect)

Ignition and electrics

Factory

Factory: Inspect every 6000 km ('Her 6.000 km'de bir: K'); no annual mark (Akü); no mile figure printed for this interval. No such row in the Gulf table

Every 6,500 km or 12 months

1 item

Inspect, clean and gap spark plugs

Engine

Guideline

Every 9,500 km or 12 months

5 items

Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 12,000 km or 12 months

14 items

Engine idle speed (inspect)

Engine

Factory

Factory: Inspect every 12000 km; annual check (Motor Rölanti Devri); dealer item (intermediate)
Headlight aim (inspect)

Engine

Factory

Factory: Inspect every 12000 km; annual check (Far Ayarı)
Inspect coolant hoses and clamps

Engine

Factory

Manual: Cooling system (inspect). Factory: Inspect every 12000 km; annual check (Soğutma Sistemi); dealer item (intermediate)
Nuts, bolts, fasteners (inspect)

Engine

Factory

Factory: Inspect every 12000 km; annual check (Somun, Cıvatalar, Bağlantı Elemanları); dealer item (intermediate)
Radiator coolant (inspect)

Engine

Factory

Factory: Bakım Programı for Europe direct sales, Singapore, Hong Kong, Macao, Korea and Turkey pp.71-72 (rendered from the Honda PDF in the browser; columns 1, 12, 24, 36, 48 x1,000 km, annual check, regular replace): pre-ride check, K at 12 to 48 x1,000 km and annual check; replace every 3 years
Test ride

Engine

Factory

Factory: Every 12000 km; annual (Test Sürüşü). No such row in the Gulf table
Check throttle cable(s) free play and return

Fuel and air

Factory

Manual: Throttle operation (inspect). Factory: Inspect every 12000 km; annual check; also pre-ride check (Gaz Kolunun Çalışması); dealer item (intermediate)
Replace fuel lines

Fuel and air

Factory

Manual: Fuel line (inspect). Factory: Inspect every 12000 km (12000-48000 km); annual check (Yakıt Hattı); dealer item (intermediate)
Check steering head bearing adjustment

Front end

Factory

Manual: Steering head bearings (inspect). Factory: Inspect every 12000 km; annual check (Gidon Kafası Rulmanları); dealer item (technical)
Grease and check center / side stand and springs

Rear suspension and frame

Factory

Manual: Side stand (inspect). Factory: Inspect every 12000 km; annual check; also pre-ride check (Yan ayak)
Inspect rear shocks for leaks and damping

Rear suspension and frame

Factory

Manual: Suspension (inspect). Factory: Inspect every 12000 km; annual check; also pre-ride check in this table (Süspansiyon); dealer item (intermediate)
Brake fluid (inspect)

Brakes

Factory

Factory: Bakım Programı for Europe direct sales, Singapore, Hong Kong, Macao, Korea and Turkey pp.71-72 (rendered from the Honda PDF in the browser; columns 1, 12, 24, 36, 48 x1,000 km, annual check, regular replace): pre-ride check, K at 12 to 48 x1,000 km and annual check; replace every 2 years
Brake system (inspect)

Brakes

Factory

Factory: Inspect every 12000 km; annual check (Fren Sistemi)
Check brake pads and discs

Brakes

Factory

Manual: Brake pads wear (inspect). Factory: Inspect every 12000 km; annual check; also pre-ride check (Fren Balatasının Aşınması). Gulf table: inspect every 6000 km

Every 12,000 km

4 items

Check engine breather and oil return

Engine

Factory

Manual: Crankcase breather (clean). Factory: Clean every 12000 km; no annual mark; service more often in rain or at full throttle (Karter Havalandırması). Gulf table: clean every 6000 km
Air cleaner (inspect)

Fuel and air

Factory

Factory: Bakım Programı for Europe direct sales, Singapore, Hong Kong, Macao, Korea and Turkey pp.71-72 (rendered from the Honda PDF in the browser; columns 1, 12, 24, 36, 48 x1,000 km, annual check, regular replace): K at 12 and 36 x1,000 km between replacements
Drive chain slider (inspect)

Final drive

Factory

Factory: Inspect every 12000 km; no annual mark (Tahrik Zinciri Sürgüsü)
Parking brake lock operation (inspect)

Brakes

Factory

Factory: Inspect every 12000 km; no annual mark (Fren Kilidinin Çalışması); dealer item (intermediate). Gulf table: inspect every 6000 km

Every 16,000 km or 2 years

1 item

Compression test (or leak-down)

Engine

Guideline

Every 19,500 km or 2 years

3 items

Synchronize throttle bodies

Fuel and air

Guideline
Clean and grease rear suspension linkage

Rear suspension and frame

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 24,000 km or 2 years

1 item

Change fork oil

Front end

Factory

Manual: Front fork oil (replace). Factory: Replace at 24000 and 48000 km and every 2 years (Ön Amortisör Yağı); replacement requires mechanical skill. No such row in the Gulf table

Every 24,000 km

5 items

Check and adjust valve clearances

Engine

Factory

Manual: Valve clearance (inspect). Factory: Inspect at 24000 and 48000 km (Subap Boşluğu); dealer item (intermediate). Gulf table: inspect at 24000 km (only 24000 marked in its 1-36k table)
Spark plug (inspect)

Engine

Factory

Factory: Bakım Programı for Europe direct sales, Singapore, Hong Kong, Macao, Korea and Turkey pp.71-72 (rendered from the Honda PDF in the browser; columns 1, 12, 24, 36, 48 x1,000 km, annual check, regular replace): K at 24 x1,000 km; replace at 48 x1,000 km
Replace air filter element

Fuel and air

Factory

Manual: Air cleaner (replace). Factory: Inspect at 12000/36000 km, replace at 24000/48000 km; service more often in very wet or dusty areas (Hava Filtresi); dealer item (intermediate). Gulf table: replace at 18000 and 36000 km, no inspect marks
DCT clutch oil filter (replace)

Primary and gearbox

Factory

Factory: Replace at 1000 km, 24000 km and 48000 km (Debriyaj Yağ filtresi). Gulf table: replace at 1000 and 24000 km
Evaporative emission control system (inspect)

Controls and cables

Factory

Factory: Inspect at 24000 and 48000 km (Buhar Emisyonu Kontrol Sistemi); dealer item (intermediate)

Every 29,000 km

1 item

Replace chain and sprockets (wear based)

Final drive

Guideline

Every 32,000 km or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 38,500 km or 4 years

1 item

Replace fuel filter

Fuel and air

Guideline

Every 40,000 km or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 48,000 km

1 item

Replace spark plugs

Engine

Factory

Manual: Spark plug (replace). Factory: Inspect at 24000 km, replace at 48000 km (Buji); dealer item (intermediate). Gulf table: same, printed as 'Her 24.000 km (16.000 mi): K / Her 48.000 km (32.000 mi): D'

Every 48,500 km or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

3 items

Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Replace brake fluid

Brakes

Factory

Manual: Brake fluid (replace). Factory: Replace every 2 years; inspect every 12000 km and annually; also pre-ride check; replacement requires mechanical skill (Fren Hidroliği). Gulf table: inspect every 6000 km

Every 3 years

1 item

Replace coolant

Engine

Factory

Manual: Radiator coolant (replace). Factory: Replace every 3 years; inspect every 12000 km and annually; also pre-ride check; replacement requires mechanical skill (Radyatör Soğutma Suyu)

Every 4 years

2 items

Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

No interval set

2 items

Engine stop switch (pre-ride check)

Engine

Factory

Factory: Bakım Programı for Europe direct sales, Singapore, Hong Kong, Macao, Korea and Turkey pp.71-72 (rendered from the Honda PDF in the browser; columns 1, 12, 24, 36, 48 x1,000 km, annual check, regular replace): pre-ride check only
Fuel level (pre-ride check)

Fuel and air

Factory

Factory: Bakım Programı for Europe direct sales, Singapore, Hong Kong, Macao, Korea and Turkey pp.71-72 (rendered from the Honda PDF in the browser; columns 1, 12, 24, 36, 48 x1,000 km, annual check, regular replace): pre-ride check only

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.