Honda NSC 110 — Example photo: Alex Neman, CC BY-SA 4.0, Wikimedia Commons

Have this bike? Send a photo or the manual's service chart

Honda · Overhead-cam four-stroke single, wet sump, separate gearbox oil, CVT belt drive

NSC 110

Library entry covers 2013-2022

25 factory 36 guideline

Published source

Honda NSC110MPD Owner's Manual 32K44L10 (English), Maintenance Schedule pp.47-48

Factory owner's handbook. Covers NSC110MPD Vision 110; 2019 EU owner's manual 32K44L10.

61 items for a 2022 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, screw/locknut adjusters
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Air / oil cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Separate gearbox oil
Clutch control: Automatic or semi-automatic
Final drive: Belt CVT, scooter automatic
Front suspension: Telescopic fork
Rear suspension: Swingarm, single shock / cantilever
Front brake: Disc, hydraulic
Rear brake: Drum (or band / belt rim)
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

2022 Honda NSC 110

On the road: every 300 km

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

Every 1,600 km or 6 months

1 item

Adjust rear drum brake and rod / cable linkage

Brakes

Guideline

Every 5,000 km or 12 months

4 items

Adjust automatic / semi-automatic clutch

Primary and gearbox

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 6,000 km or 12 months

11 items

Change engine oil

Engine

Factory

Manual: Engine oil (replace). Factory: Replace at 1000 km initial, then every 6000 km; annual replace
Engine idle speed (inspect)

Engine

Factory

Factory: At 1000 km, then every 6000 km; annual check
Headlight Aim

Engine

Factory

Factory: I at 6 to 36 x1,000 km and annual check (Maintenance schedule p.48, rendered from the Honda PDF in the browser; columns 1, 6, 12, 18, 24, 30, 36 x1,000 km (0.6, 4, 8, 12, 16, 20, 24 x1,000 mi), annual check)
Check throttle cable(s) free play and return

Fuel and air

Factory

Manual: Throttle operation (inspect). Factory: Every 6000 km; annual check
Replace fuel lines

Fuel and air

Factory

Manual: Fuel line (inspect). Factory: Every 6000 km; annual check; dealer item
Battery (inspect)

Ignition and electrics

Factory

Factory: Every 6000 km; annual check
Grease and check center / side stand and springs

Rear suspension and frame

Factory

Manual: Side stand (inspect). Factory: Every 6000 km; annual check
Inspect rear shocks for leaks and damping

Rear suspension and frame

Factory

Manual: Suspension (inspect). Factory: Every 6000 km; annual check
Brake System

Brakes

Factory

Factory: I at 6 to 36 x1,000 km and annual check; pre-ride check (Maintenance schedule p.48, rendered from the Honda PDF in the browser; columns 1, 6, 12, 18, 24, 30, 36 x1,000 km (0.6, 4, 8, 12, 16, 20, 24 x1,000 mi), annual check)
Check brake pads and discs

Brakes

Factory

Manual: Brake shoes/pads wear (inspect). Factory: Every 6000 km; annual check
Inspect tire tread, sidewalls and date codes

Wheels and tires

Factory

Manual: Wheels/tires (inspect). Factory: Every 6000 km; annual check; dealer item

Every 6,000 km

3 items

Check and adjust valve clearances

Engine

Factory

Manual: Valve clearance (inspect). Factory: Every 6000 km; dealer item
Check engine breather and oil return

Engine

Factory

Manual: Crankcase breather (clean). Factory: Every 6000 km; more often in rain or at full throttle
Brake Lock Operation

Brakes

Factory

Factory: I at 6 to 36 x1,000 km (Maintenance schedule p.48, rendered from the Honda PDF in the browser; columns 1, 6, 12, 18, 24, 30, 36 x1,000 km (0.6, 4, 8, 12, 16, 20, 24 x1,000 mi), annual check)

Every 6,500 km or 12 months

3 items

Inspect, clean and gap spark plugs

Engine

Guideline
Inspect CVT drive belt, rollers / sliders and clutch shoes

Final drive

Guideline

Typical scooter interval. Your owner's manual figure governs; check belt width against the service limit.
Lubricate brake cam spindles, check linings and drums

Brakes

Guideline

Every 8,000 km or 12 months

1 item

Replace oil filter

Engine

Guideline

Every 9,500 km or 12 months

5 items

Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 12,000 km or 12 months

2 items

Nuts, Bolts, Fasteners

Engine

Factory

Factory: I at 12, 24 and 36 x1,000 km and annual check (Maintenance schedule p.48, rendered from the Honda PDF in the browser; columns 1, 6, 12, 18, 24, 30, 36 x1,000 km (0.6, 4, 8, 12, 16, 20, 24 x1,000 mi), annual check)
Check steering head bearing adjustment

Front end

Factory

Manual: Steering head bearings (inspect). Factory: Every 12000 km; annual check; dealer item

Every 12,000 km

3 items

Clean oil strainers / mesh screens

Engine

Factory

Manual: Engine oil strainer screen (clean). Factory: Clean at 12000, 24000, 36000 km
Replace spark plugs

Engine

Factory

Manual: Spark plug (replace). Factory: Inspect at 6000/18000/30000 km, replace at 12000/24000/36000 km
Clutch shoes wear (inspect)

Primary and gearbox

Factory

Factory: Every 12000 km; dealer item

Every 16,000 km or 2 years

2 items

Compression test (or leak-down)

Engine

Guideline
Change gearbox oil

Primary and gearbox

Guideline

Every 18,000 km

1 item

Replace air filter element

Fuel and air

Factory

Manual: Air cleaner (replace). Factory: Replace at 18000 and 36000 km; sooner in wet or dusty areas; dealer item

Every 19,500 km or 2 years

3 items

Synchronize throttle bodies

Fuel and air

Guideline
Clean and grease rear suspension linkage

Rear suspension and frame

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 19,500 km or 3 years

1 item

Replace CVT drive belt

Final drive

Guideline

Typical scooter interval, or sooner if the belt is cracked, glazed or below its width limit.

Every 24,000 km or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 24,000 km

2 items

Replace drive belt (wear or damage based)

Final drive

Factory

Manual: Drive belt (replace). Factory: Inspect at 12000 and 36000 km, replace at 24000 km; dealer item
Replace brake linings / skim drums (wear based)

Brakes

Guideline

Every 32,000 km or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 38,500 km or 4 years

1 item

Replace fuel filter

Fuel and air

Guideline

Every 40,000 km or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 48,500 km or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

4 items

Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Change final drive (rear drive) oil

Final drive

Factory

Manual: Final drive oil (replace). Factory: Every 2 years; replacement requires mechanical skill
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Replace brake fluid

Brakes

Factory

Manual: Brake fluid (replace). Factory: Every 2 years; inspect every 6000 km and annually

Every 4 years

2 items

Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

No interval set

2 items

Lights/Horn (pre-ride check)

Engine

Factory

Factory: pre-ride check (Maintenance schedule p.48, rendered from the Honda PDF in the browser; columns 1, 6, 12, 18, 24, 30, 36 x1,000 km (0.6, 4, 8, 12, 16, 20, 24 x1,000 mi), annual check)
Fuel Level (pre-ride check)

Fuel and air

Factory

Factory: pre-ride check (Maintenance schedule p.48, rendered from the Honda PDF in the browser; columns 1, 6, 12, 18, 24, 30, 36 x1,000 km (0.6, 4, 8, 12, 16, 20, 24 x1,000 mi), annual check)

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.