No photo of this model in the library yet.

Honda · Modern air-cooled single (2000-)

Scoopy (108 cc)

Library entry covers 2013-2015

23 factory 35 guideline

Published source

Honda Scoopy Buku Pedoman Pemilik 2024 (BPPG_K2FP, Astra Honda Motor, Indonesia market, Indonesian), Jadwal Perawatan Berkala pp.89-90

Factory owner's handbook. Covers Scoopy K2F (code from file name BPPG_K2FP); 2024 Astra Honda Motor owner's manual; Indonesia market, Indonesian. Note: catalog row is the older 108 cc Scoopy (2013-2015); this schedule is from the 2024 manual, not a manual for those years.

Open the source

58 items for a 2014 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, screw/locknut adjusters
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Single carburetor
Cooling: Air / oil cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Shares engine oil
Clutch control: Automatic or semi-automatic
Final drive: Leather or rubber V-belt (veteran)
Front suspension: Telescopic fork
Rear suspension: Swingarm, single shock / cantilever
Front brake: Disc, hydraulic
Rear brake: Drum (or band / belt rim)
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

2014 Honda Scoopy (108 cc)

On the road: every 100 mi

1 item

Check drive belt tension and belt fastener

Pre-ride / on the road

Guideline

Leather and early rubber belts stretch and slip when wet. Carry a spare fastener and a belt punch.

On the road: every 200 mi

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 300 mi

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

Every 500 mi

1 item

Dress / clean V-belt and pulley rims

Final drive

Guideline

Every 1,000 mi or 6 months

1 item

Adjust rear drum brake and rod / cable linkage

Brakes

Guideline

Every 2,485 mi or 4 months

14 items

Change engine oil

Engine

Factory

Manual: Engine oil (replace). Factory: Replace at 1000 km/2 months initial, then every 4000 km/4 months (columns pair km with months); also replace at annual check; level check before riding (Oli Mesin); schedule is km/months only (no mile figures printed)
Check and adjust valve clearances

Engine

Factory

Manual: Valve clearance (inspect). Factory: Inspect every 4000 km/4 months from 4000 km (no 1000 km check) (Jarak Renggang Klep); dealer item (wrench: intermediate, AHASS recommended)
Check engine breather and oil return

Engine

Factory

Manual: Crankcase breather (clean). Factory: Clean every 4000 km/4 months from 4000 km; service more often if ridden in rain or at high speed (Pernapasan Bak Mesin)
Engine idle speed (inspect)

Engine

Factory

Factory: Inspect at 1000 km/2 months, then every 4000 km/4 months; annual check (Putaran Stasioner Mesin); dealer item (wrench: intermediate, AHASS recommended)
Headlight aim (inspect)

Engine

Factory

Factory: Inspect every 4000 km/4 months from 4000 km; annual check (Arah Sinar Lampu Depan)
Check throttle cable(s) free play and return

Fuel and air

Factory

Manual: Throttle operation (inspect). Factory: Inspect every 4000 km/4 months from 4000 km; annual check; also pre-ride check (Cara Kerja Gas Tangan); dealer item (wrench: intermediate, AHASS recommended)
Replace fuel lines

Fuel and air

Factory

Manual: Fuel line (inspect). Factory: Inspect every 4000 km/4 months from 4000 km; annual check (Saluran Bahan Bakar); dealer item (wrench: intermediate, AHASS recommended)
Battery (inspect)

Ignition and electrics

Factory

Factory: Inspect every 4000 km/4 months from 4000 km; annual check (Baterai); dealer item (wrench: intermediate, AHASS recommended)
Grease and check center / side stand and springs

Rear suspension and frame

Factory

Manual: Side stand (inspect). Factory: Inspect every 4000 km/4 months from 4000 km; annual check; pre-ride check (Standar Samping)
Inspect rear shocks for leaks and damping

Rear suspension and frame

Factory

Manual: Suspension (inspect). Factory: Inspect every 4000 km/4 months from 4000 km; annual check (Suspensi); dealer item (wrench: intermediate, AHASS recommended)
Brake lock operation (inspect)

Brakes

Factory

Factory: Inspect every 4000 km/4 months from 4000 km; no annual mark (Cara Kerja Kunci Rem); dealer item (wrench: intermediate, AHASS recommended)
Brake system (inspect)

Brakes

Factory

Factory: Inspect at 1000 km/2 months, then every 4000 km/4 months; annual check; pre-ride check (Sistem Rem)
Check brake pads and discs

Brakes

Factory

Manual: Brake pad/shoe wear (inspect). Factory: Inspect every 4000 km/4 months from 4000 km; annual check; pre-ride check (Keausan Kampas Rem)
Inspect tire tread, sidewalls and date codes

Wheels and tires

Factory

Manual: Wheels/tires (inspect). Factory: Inspect every 4000 km/4 months from 4000 km; annual check; pre-ride check (Roda/Ban); dealer item (crossed tools: technical, service at AHASS)

Every 3,000 mi or 12 months

5 items

Clean fuel tap filter / sediment bowl

Fuel and air

Guideline
Adjust automatic / semi-automatic clutch

Primary and gearbox

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 4,000 mi or 12 months

2 items

Inspect, clean and gap spark plugs

Engine

Guideline
Lubricate brake cam spindles, check linings and drums

Brakes

Guideline

Every 4,971 mi or 8 months

4 items

Nuts, bolts, fasteners (inspect)

Engine

Factory

Factory: Inspect at 1000 km/2 months, then 8000/16000/24000/32000/40000/48000 km; annual check (Mur, Baut, Pengencang); dealer item (wrench: intermediate, AHASS recommended)
Replace spark plugs

Engine

Factory

Manual: Spark plug (replace). Factory: Inspect at 4000/12000/20000/28000/36000/44000 km, replace at 8000/16000/24000/32000/40000/48000 km (same figures in months) (Busi)
Clutch shoe wear (inspect)

Primary and gearbox

Factory

Factory: Inspect at 8000/16000/24000/32000/40000/48000 km (same figures in months) (Keausan Kampas Kopling); dealer item (crossed tools: technical, service at AHASS)
Change final drive (rear drive) oil

Final drive

Factory

Manual: Final drive oil (replace). Factory: Replace at 8000/16000/24000/32000/40000/48000 km (same figures in months); replacement requires mechanical skill (Oli Final Drive); dealer item (wrench: intermediate, AHASS recommended)

Every 5,000 mi or 12 months

1 item

Replace oil filter

Engine

Guideline

Every 6,000 mi or 12 months

6 items

Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Clean carburetor float bowl(s), check float level and jets

Fuel and air

Guideline

Ethanol fuel varnishes old carbs quickly in storage.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 7,456 mi or 12 months

2 items

Clean oil strainers / mesh screens

Engine

Factory

Manual: Engine oil strainer screen (clean). Factory: Clean at 12000/24000/36000/48000 km (12/24/36/48 months) (Saringan Kasa Oli Mesin); no difficulty icon printed for this row
Check steering head bearing adjustment

Front end

Factory

Manual: Steering head bearings (inspect). Factory: Inspect at 12000/24000/36000/48000 km (same figures in months); annual check (Bantalan Kepala Kemudi); dealer item (crossed tools: technical, service at AHASS)

Every 9,942 mi or 16 months

1 item

Replace air filter element

Fuel and air

Factory

Manual: Air cleaner (replace). Factory: Replace at 16000/32000/48000 km (16/32/48 months); service more often if often ridden in wet or dusty areas (Saringan Udara); dealer item (wrench: intermediate, AHASS recommended)

Every 10,000 mi or 2 years

1 item

Compression test (or leak-down)

Engine

Guideline

Every 12,000 mi or 2 years

2 items

Clean and grease rear suspension linkage

Rear suspension and frame

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 14,913 mi or 2 years

2 items

Replace drive belt (wear or damage based)

Final drive

Factory

Manual: Drive belt (replace). Factory: Inspect at 8000/16000/32000/40000 km, replace at 24000 and 48000 km (same figures in months); dealer item (wrench: intermediate, AHASS recommended)
Replace brake fluid

Brakes

Factory

Manual: Brake fluid (replace). Factory: Replace at 24000 and 48000 km (24/48 months) and every 2 years (Penggantian Reguler '2 tahun'); inspect at the other 4000 km/4 month columns and at annual check; pre-ride check; replacement requires mechanical skill (Minyak rem)

Every 15,000 mi or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 15,000 mi

1 item

Replace brake linings / skim drums (wear based)

Brakes

Guideline

Every 20,000 mi or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 25,000 mi or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 30,000 mi or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

2 items

Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline

Every 4 years

2 items

Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.