Honda XL / XR650, NX650 — Example photo: steve lyon, CC BY-SA 2.0, Wikimedia Commons

Have this bike? Send a photo or the manual's service chart

Honda · Overhead-cam four-stroke single, dry sump, gearbox shares engine oil, chain drive

XL / XR650, NX650

Library entry covers 1985-2026

28 factory 46 guideline

Published source

Honda XR650L Service Manual, Maintenance Schedule p.3-4

Factory workshop manual. Covers XR650L (1993-on service manual).

74 items for a 2019 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Dry sump (separate oil tank)
Oil filtration: Centrifugal (slinger / rotor) filter
Valve gear: Overhead cam, screw/locknut adjusters
Ignition: Magneto (incl. magdyno, flywheel magneto)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Single carburetor
Cooling: Air / oil cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Shares engine oil
Clutch control: Hand lever, cable
Final drive: Chain
Front suspension: Telescopic fork
Rear suspension: Swingarm, single shock / cantilever
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Spoked, tubed
Sidecar: No sidecar

Maintenance schedule

2019 Honda XL / XR650, NX650

On the road: every 200 mi

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 300 mi

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

On the road: every 600 mi

2 items

Check chain slack and rear wheel alignment

Pre-ride / on the road

Guideline
Lubricate drive chain

Pre-ride / on the road

Factory

Manual: Drive chain. Factory: I, L every 600 mi (1,000 km)

Every 1,000 mi or 6 months

1 item

Inspect tire tread, sidewalls and date codes

Wheels and tires

Guideline

Every 2,000 mi

1 item

Change engine oil

Engine

Factory

Manual: Engine oil. Factory: R at initial, then every 2,000 mi (3,000 km)

Every 3,000 mi or 12 months

11 items

Check throttle cable(s) free play and return

Fuel and air

Guideline
Check / set ignition timing

Ignition and electrics

Guideline
Clean and gap contact breaker points, oil cam felt

Ignition and electrics

Guideline
Clean drive chain thoroughly (remove and soak, re-lube)

Final drive

Guideline

Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.
Inspect chain and sprockets for wear (measure stretch)

Final drive

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline
Check brake pads and discs

Brakes

Guideline
Check spoke tension and wheel true

Wheels and tires

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 4,000 mi

10 items

Check and adjust valve clearances

Engine

Factory

Manual: Valve clearance. Factory: I every column incl. initial
Inspect, clean and gap spark plugs

Engine

Factory

Manual: Spark plug (inspect). Factory: I at 4, 12, 20
Spark arrester/muffler (clean)

Engine

Factory

Factory: C every column after initial
Carburetor Idle Speed

Fuel and air

Factory

Factory: As printed: I at 0.6 (10 x 100 km) and 4, 8, 12, 16, 20, 24 (x 1,000 mi) / 64 ... 384 (x 100 km)
Clean fuel tap filter / sediment bowl

Fuel and air

Factory

Manual: Fuel strainer screen (clean). Factory: C every column after initial; Cols x1000mi 0.6/4/8/12/16/20/24; x100km 10/64/128/192/256/320/384
Adjust clutch free play, lubricate cable and lever pivot

Primary and gearbox

Factory

Manual: Clutch system. Factory: I every column incl. initial
Drive Chain Slider

Final drive

Factory

Factory: As printed: I at 4, 8, 12, 16, 20, 24 (x 1,000 mi) / 64 ... 384 (x 100 km)
Brake Fluid (I)

Brakes

Factory

Factory: As printed: I at 4, 8, 16, 20 (x 1,000 mi); R at 12, 24; Note 5: Replace every 2 years, or at indicated odometer interval, whichever comes first.
Brake Pads Wear

Brakes

Factory

Factory: As printed: I at 4, 8, 12, 16, 20, 24 (x 1,000 mi) / 64 ... 384 (x 100 km)
Wheels/Tires (Note 4)

Wheels and tires

Factory

Factory: As printed: I at 0.6 (10 x 100 km) and 4, 8, 12, 16, 20, 24 (x 1,000 mi) / 64 ... 384 (x 100 km); Note 4: Service more frequently when riding OFF-ROAD.

Every 6,000 mi or 12 months

8 items

Clean oil strainers / mesh screens

Engine

Guideline

Often done with every oil change on old machines.
Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Clean carburetor float bowl(s), check float level and jets

Fuel and air

Guideline

Ethanol fuel varnishes old carbs quickly in storage.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 6,000 mi or 2 years

3 items

Clean centrifugal oil filter (rotor / slinger)

Engine

Guideline
Lubricate and check automatic advance unit

Ignition and electrics

Guideline
Magneto: clean slip ring and pickup brush, check HT lead

Ignition and electrics

Guideline

Every 8,000 mi

13 items

Headlight Aim

Engine

Factory

Factory: As printed: I at 8, 16, 24 (x 1,000 mi) / 128, 256, 384 (x 100 km)
Nuts, Bolts, Fasteners (Note 4)

Engine

Factory

Factory: As printed: I at 0.6 (10 x 100 km) and 8, 16, 24 (x 1,000 mi) / 128, 256, 384 (x 100 km); Note 4: Service more frequently when riding OFF-ROAD.
Replace oil filter

Engine

Factory

Manual: Engine oil filter. Factory: R at 0.6, 8, 16, 24
Replace spark plugs

Engine

Factory

Manual: Spark plug (replace). Factory: R at 8, 16, 24
Secondary Air Supply System

Engine

Factory

Factory: As printed: I at 8, 16, 24 (x 1,000 mi) / 128, 256, 384 (x 100 km)
Suspension

Engine

Factory

Factory: As printed: I at 8, 16, 24 (x 1,000 mi) / 128, 256, 384 (x 100 km)
Throttle Operation

Engine

Factory

Factory: As printed: I at 8, 16, 24 (x 1,000 mi) / 128, 256, 384 (x 100 km)
Carburetor Choke

Fuel and air

Factory

Factory: As printed: I at 8, 16, 24 (x 1,000 mi) / 128, 256, 384 (x 100 km)
Fuel Line

Fuel and air

Factory

Factory: As printed: I at 8, 16, 24 (x 1,000 mi) / 128, 256, 384 (x 100 km)
Check steering head bearing adjustment

Front end

Factory

Manual: Steering head bearings. Factory: I at 0.6, 8, 16, 24
Side Stand

Rear suspension and frame

Factory

Factory: As printed: I at 8, 16, 24 (x 1,000 mi) / 128, 256, 384 (x 100 km)
Brake Light Switch

Brakes

Factory

Factory: As printed: I at 8, 16, 24 (x 1,000 mi) / 128, 256, 384 (x 100 km)
Brake System

Brakes

Factory

Factory: As printed: I at 0.6 (10 x 100 km) and 8, 16, 24 (x 1,000 mi) / 128, 256, 384 (x 100 km)

Every 10,000 mi or 2 years

1 item

Compression test (or leak-down)

Engine

Guideline

Every 12,000 mi or 2 years

3 items

Clean and grease rear suspension linkage

Rear suspension and frame

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline
Replace brake fluid

Brakes

Factory

Manual: Brake fluid. Factory: R at 12 and 24; Note 5: every 2 years

Every 12,000 mi or 3 years

1 item

Replace points and condenser

Ignition and electrics

Guideline

Every 12,000 mi

2 items

Replace air filter element

Fuel and air

Factory

Manual: Air cleaner. Factory: R at 12 and 24
Evaporative Emission Control System (Note 3: California type only)

Controls and cables

Factory

Factory: As printed: I at 12, 24 (x 1,000 mi) / 192, 384 (x 100 km)

Every 15,000 mi or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 18,000 mi

1 item

Replace chain and sprockets (wear based)

Final drive

Guideline

Every 20,000 mi or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 25,000 mi or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 25,000 mi or 10 years

1 item

Magneto overhaul / re-magnetize, replace capacitor

Ignition and electrics

Guideline

Weak spark when hot is the classic symptom. Old capacitors fail with age, not miles.

Every 30,000 mi or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

2 items

Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline

Every 4 years

3 items

Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

2 items

Replace inner tubes and rim tape with tires

Wheels and tires

Guideline
Replace tires on age (regardless of tread)

Wheels and tires

Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.