Husqvarna Svartpilen (799 cc) — Example photo: KTM AG, CC BY-SA 4.0, Wikimedia Commons

Have this bike? Send a photo or the manual's service chart

Husqvarna · Shim-adjusted overhead-cam four-stroke, wet sump, gearbox shares engine oil, chain drive

Svartpilen (799 cc)

Library entry covers 2017-2025

41 factory 50 guideline

Published source

Husqvarna Svartpilen 801 owner's manual 2024 (Art. no. 3402759en), ManualsLib

Factory owner's handbook. Covers edition 2024.

91 items for a 2019 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, shim adjusted (incl. desmo)
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Liquid cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Shares engine oil
Clutch control: Hand lever, cable
Final drive: Chain
Front suspension: Telescopic fork
Rear suspension: Swingarm, single shock / cantilever
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

2019 Husqvarna Svartpilen (799 cc)

On the road: every 200 mi

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 300 mi

3 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline
Lubricate drive chain

Pre-ride / on the road

Guideline

Lube warm, ideally at the end of the riding day so it soaks in overnight. Sooner after rain.

On the road: every 500 mi

1 item

Check coolant level

Pre-ride / on the road

Guideline

On the road: every 600 mi

1 item

Check chain slack and rear wheel alignment

Pre-ride / on the road

Guideline

Every 1,000 mi or 6 months

1 item

Inspect tire tread, sidewalls and date codes

Wheels and tires

Guideline

Every 3,000 mi or 12 months

9 items

Check throttle cable(s) free play and return

Fuel and air

Guideline
Clean drive chain thoroughly (remove and soak, re-lube)

Final drive

Guideline

Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.
Inspect chain and sprockets for wear (measure stretch)

Final drive

Guideline
Check steering head bearing adjustment

Front end

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline
Check brake pads and discs

Brakes

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 4,000 mi or 12 months

2 items

Inspect, clean and gap spark plugs

Engine

Guideline
Adjust clutch free play, lubricate cable and lever pivot

Primary and gearbox

Guideline

Every 5,000 mi or 12 months

2 items

Change engine oil

Engine

Guideline

Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.
Replace oil filter

Engine

Guideline

Every 6,000 mi or 12 months

7 items

Inspect coolant hoses and clamps

Engine

Guideline
Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 9,321 mi or 12 months

28 items

All hoses and sleeves for cracking, tightness and routing (check)

Engine

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Every 15,000 km (9,300 mi) or 12 months.
Antifreeze and coolant level (check)

Engine

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Once after 1,000 km (620 mi), then every 15,000 km (9,300 mi) or 12 months. (not in 48-month column.)
Electrical system function (check)

Engine

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Once after 1,000 km (620 mi), then every 15,000 km (9,300 mi) or 12 months.
Empty the drainage hoses

Engine

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Once after 1,000 km (620 mi), then every 15,000 km (9,300 mi) or 12 months.
Engine oil and oil filter (change), clean the oil screens

Engine

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Once after 1,000 km (620 mi), then every 15,000 km (9,300 mi) or 12 months.
Final check: roadworthiness and test ride

Engine

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Once after 1,000 km (620 mi), then every 15,000 km (9,300 mi) or 12 months.
Grease all moving parts and check for smooth operation

Engine

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Once after 1,000 km (620 mi), then every 15,000 km (9,300 mi) or 12 months.
Program the shift shaft sensor

Engine

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Once after 1,000 km (620 mi), then every 15,000 km (9,300 mi) or 12 months.
Radiator fan function (check)

Engine

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Once after 1,000 km (620 mi), then every 15,000 km (9,300 mi) or 12 months.
Read out the fault memory after the test ride

Engine

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Once after 1,000 km (620 mi), then every 15,000 km (9,300 mi) or 12 months.
Read out the fault memory with the diagnostics tool

Engine

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Once after 1,000 km (620 mi), then every 15,000 km (9,300 mi) or 12 months.
Safety-relevant screws and nuts for tightness (check)

Engine

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Once after 1,000 km (620 mi), then every 15,000 km (9,300 mi) or 12 months.
Set the service interval display

Engine

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Once after 1,000 km (620 mi), then every 15,000 km (9,300 mi) or 12 months.
Fuel pressure and fuel tank roller absorbing elements (check)

Fuel and air

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Every 15,000 km (9,300 mi) or 12 months.
Clutch lever free travel (check)

Primary and gearbox

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Once after 1,000 km (620 mi), then every 15,000 km (9,300 mi) or 12 months.
Chain tension (check)

Final drive

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Once after 1,000 km (620 mi), then every 15,000 km (9,300 mi) or 12 months.
Chain, rear sprocket, engine sprocket and chain guide (check)

Final drive

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Every 15,000 km (9,300 mi) or 12 months.
Shock absorber and fork for leaks (check); fork and shock service as needed

Front end

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Once after 1,000 km (620 mi), then every 15,000 km (9,300 mi) or 12 months.
Brake discs (check)

Brakes

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Once after 1,000 km (620 mi), then every 15,000 km (9,300 mi) or 12 months.
Brake lines for damage and tightness (check)

Brakes

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Once after 1,000 km (620 mi), then every 15,000 km (9,300 mi) or 12 months.
Foot brake lever free travel (check)

Brakes

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Once after 1,000 km (620 mi), then every 15,000 km (9,300 mi) or 12 months.
Front brake fluid level (check)

Brakes

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Once after 1,000 km (620 mi), then every 15,000 km (9,300 mi) or 12 months. (12-month column marked; not in 24/48-month columns.)
Front brake linings secured (check)

Brakes

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Once after 1,000 km (620 mi), then every 15,000 km (9,300 mi) or 12 months.
Rear brake fluid level (check)

Brakes

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Once after 1,000 km (620 mi), then every 15,000 km (9,300 mi) or 12 months. (12-month column marked; not in 24/48-month columns.)
Rear brake linings secured (check)

Brakes

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Once after 1,000 km (620 mi), then every 15,000 km (9,300 mi) or 12 months.
Tire condition (check)

Wheels and tires

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Once after 1,000 km (620 mi), then every 15,000 km (9,300 mi) or 12 months.
Tire pressure (check)

Wheels and tires

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Once after 1,000 km (620 mi), then every 15,000 km (9,300 mi) or 12 months.
Cables for damage and kink-free routing (check)

Controls and cables

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Every 15,000 km (9,300 mi) or 12 months.

Every 9,321 mi

6 items

Headlight setting (check)

Engine

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Once after 1,000 km (620 mi), then every 15,000 km (9,300 mi).
Air filter (change), clean the air filter box

Fuel and air

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Every 15,000 km (9,300 mi).
Fork bearing play (check)

Front end

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Every 15,000 km (9,300 mi).
Fork leg dust boots (clean)

Front end

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Every 15,000 km (9,300 mi).
Steering head bearing play (check)

Front end

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Once after 1,000 km (620 mi), then every 15,000 km (9,300 mi).
Wheel bearing play (check)

Wheels and tires

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Every 15,000 km (9,300 mi).

Every 10,000 mi or 2 years

1 item

Compression test (or leak-down)

Engine

Guideline

Every 12,000 mi or 2 years

4 items

Replace air filter element

Fuel and air

Guideline
Synchronize throttle bodies

Fuel and air

Guideline
Clean and grease rear suspension linkage

Rear suspension and frame

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 15,000 mi or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 15,000 mi or 4 years

1 item

Check valve clearances (shim adjusted)

Engine

Guideline

Every 16,000 mi or 4 years

1 item

Replace spark plugs

Engine

Guideline

Every 18,000 mi

1 item

Replace chain and sprockets (wear based)

Final drive

Guideline

Every 18,642 mi

4 items

Spark plugs (change)

Engine

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Every 30,000 km (18,600 mi).
Valve clearance (check)

Engine

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Every 30,000 km (18,600 mi).
Swingarm (link fork) (check)

Front end

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Every 30,000 km (18,600 mi).
Frame (check)

Rear suspension and frame

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Every 30,000 km (18,600 mi).

Every 20,000 mi or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 24,000 mi or 4 years

1 item

Replace fuel filter

Fuel and air

Guideline

Every 25,000 mi or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 30,000 mi or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

6 items

Replace coolant

Engine

Guideline
Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Front brake fluid (change)

Brakes

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Every 24 months.
Rear brake fluid (change)

Brakes

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Every 24 months.
Replace brake fluid

Brakes

Guideline

Every 4 years

4 items

Coolant (change)

Engine

Factory

Factory: Service schedule 11.2 (Husqvarna Svartpilen 801 owner's manual 2024, Art. no. 3402759en, printed p.75-76). Columns: once after 1,000 km (620 mi); every 15,000 km (9,300 mi); every 30,000 km (18,600 mi); every 12, 24 and 48 months. Every 48 months.
Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.