No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

Husqvarna · Two-stroke single, premix, chain drive

WRE 125

Library entry covers 1997-2013

37 factory 57 guideline

Published source

Husqvarna WRE - SMS 125 2011 owner's manual, scheduled maintenance chart pp.A-2 to A-6 (ManualsLib.mx 524468)

Factory source. Covers 2011 model (chart header prints WRE - SMS 125); other years may differ.

94 items for a 2008 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Two-stroke
Engine lubrication: Two-stroke premix (oil in fuel)
Oil filtration: None (no filter)
Valve gear: None (two-stroke porting)
Ignition: Magneto (incl. magdyno, flywheel magneto)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Single carburetor
Cooling: Liquid cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Separate gearbox oil
Clutch control: Hand lever, cable
Final drive: Chain
Front suspension: Telescopic fork
Rear suspension: Swingarm, twin shocks
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Spoked, tubed
Sidecar: No sidecar

Maintenance schedule

2008 Husqvarna WRE 125

On the road: every 150 mi

1 item

Check two-stroke oil tank / carry premix oil

Pre-ride / on the road

Guideline

Running a two-stroke out of oil seizes it. Injection bikes: check the tank. Premix: carry oil and a measure.

On the road: every 300 mi

3 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline
Lubricate drive chain

Pre-ride / on the road

Guideline

Lube warm, ideally at the end of the riding day so it soaks in overnight. Sooner after rain.

On the road: every 500 mi

1 item

Check coolant level

Pre-ride / on the road

Guideline

On the road: every 600 mi

1 item

Check chain slack and rear wheel alignment

Pre-ride / on the road

Guideline

Every 311 mi

2 items

Two-stroke engine oil level (check)

Engine

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. C every 500 km.
Drive chain and chain tensioner rollers (check)

Final drive

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. C every 500 km.

Every 1,000 mi or 6 months

1 item

Inspect tire tread, sidewalls and date codes

Wheels and tires

Guideline

Every 2,000 mi or 12 months

1 item

Replace spark plugs (two-stroke)

Engine

Guideline

Every 3,000 mi or 12 months

13 items

Check throttle cable(s) free play and return

Fuel and air

Guideline
Clean fuel tap filter / sediment bowl

Fuel and air

Guideline
Check / set ignition timing

Ignition and electrics

Guideline
Clean and gap contact breaker points, oil cam felt

Ignition and electrics

Guideline
Clean drive chain thoroughly (remove and soak, re-lube)

Final drive

Guideline

Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.
Inspect chain and sprockets for wear (measure stretch)

Final drive

Guideline
Check steering head bearing adjustment

Front end

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline
Check brake pads and discs

Brakes

Guideline
Check spoke tension and wheel true

Wheels and tires

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 3,000 mi or 2 years

1 item

Decarbonize exhaust ports, pipes and baffles

Engine

Guideline

Two-strokes coke up the exhaust port and muffler baffles; power falls off gradually.

Every 3,107 mi

22 items

Coolant (check)

Engine

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. C After the first 1,000 km, then every 5,000 km.
Headlamp beam height (check)

Engine

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. C After the first 1,000 km, then every 5,000 km.
Lights, indicators and horn (check)

Engine

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. C After the first 1,000 km, then every 5,000 km.
Lubrication and greasing

Engine

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. L After the first 1,000 km, then every 5,000 km.
Overall tightening of nuts and bolts (check)

Engine

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. C After the first 1,000 km, then every 5,000 km.
Piston and cylinder (check)

Engine

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. C Every 5,000 km. X replace if necessary.
Spark plug (change)

Engine

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. S Every 5,000 km.
Air filter (clean)

Fuel and air

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. P after the first 1,000 km, at 5,000 and 15,000 km.
Carburetor (check and clean)

Fuel and air

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. C/P After the first 1,000 km, then every 5,000 km.
Exhaust valve (decarbonize)

Fuel and air

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. P Every 5,000 km.
Fuel hoses and filters (clean)

Fuel and air

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. P After the first 1,000 km, then every 5,000 km.
Battery (check)

Ignition and electrics

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. C After the first 1,000 km, then every 5,000 km.
Clutch discs (check)

Primary and gearbox

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. C Every 5,000 km. X replace if necessary.
Rear sprocket and gearbox output sprocket (check)

Primary and gearbox

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. C at 5,000 and 15,000 km.
Transmission oil (change)

Primary and gearbox

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. S Every 5,000 km.
Side stand screws (check)

Rear suspension and frame

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. C After the first 1,000 km, then every 5,000 km.
Brake fluid (check)

Brakes

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. C After the first 1,000 km, then every 5,000 km.
Hydraulic brake controls (check)

Brakes

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. C After the first 1,000 km, then every 5,000 km.
Tire pressure and wear (check)

Wheels and tires

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. C After the first 1,000 km, then every 5,000 km.
Wheel spoke tension (check)

Wheels and tires

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. C After the first 1,000 km, then every 5,000 km.
Bowden cables (check, lubricate)

Controls and cables

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. C after 1,000 km; L Every 5,000 km.
Throttle control (check)

Controls and cables

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. C After the first 1,000 km, then every 5,000 km.

Every 4,000 mi or 12 months

2 items

Inspect, clean and gap spark plugs

Engine

Guideline
Adjust clutch free play, lubricate cable and lever pivot

Primary and gearbox

Guideline

Every 6,000 mi or 12 months

8 items

Inspect coolant hoses and clamps

Engine

Guideline
Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Clean carburetor float bowl(s), check float level and jets

Fuel and air

Guideline

Ethanol fuel varnishes old carbs quickly in storage.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 6,000 mi or 2 years

2 items

Lubricate and check automatic advance unit

Ignition and electrics

Guideline
Magneto: clean slip ring and pickup brush, check HT lead

Ignition and electrics

Guideline

Every 6,214 mi

11 items

Coolant (change)

Engine

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. S Every 10,000 km.
Air filter (change)

Fuel and air

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. S Every 10,000 km.
Carburetor idle and CO (check)

Fuel and air

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. C Every 10,000 km.
Fuel hoses and filters (change)

Fuel and air

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. S Every 10,000 km.
Oil and fuel tanks (clean)

Fuel and air

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. P Every 10,000 km.
Rear sprocket and gearbox output sprocket (change)

Primary and gearbox

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. S Every 10,000 km.
Front fork oil (change)

Front end

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. S Every 10,000 km.
Steering bearing play (check)

Front end

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. C after the first 1,000 km, then every 10,000 km.
Brake fluid (change)

Brakes

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. S Every 10,000 km.
Brake pad wear (check)

Brakes

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. C after the first 1,000 km, then every 10,000 km.
Wheel hub bearings (check)

Wheels and tires

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. C Every 10,000 km.

Every 10,000 mi or 2 years

2 items

Compression test (or leak-down)

Engine

Guideline
Change gearbox oil

Primary and gearbox

Guideline

Every 12,000 mi or 2 years

2 items

Replace air filter element

Fuel and air

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 12,000 mi or 3 years

1 item

Replace points and condenser

Ignition and electrics

Guideline

Every 15,000 mi or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 16,000 mi or 4 years

1 item

Replace spark plugs

Engine

Guideline

Every 18,000 mi

1 item

Replace chain and sprockets (wear based)

Final drive

Guideline

Every 20,000 mi or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 25,000 mi or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 25,000 mi or 10 years

1 item

Magneto overhaul / re-magnetize, replace capacitor

Ignition and electrics

Guideline

Weak spark when hot is the classic symptom. Old capacitors fail with age, not miles.

Every 30,000 mi or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

4 items

Replace coolant

Engine

Guideline
Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Replace brake fluid

Brakes

Guideline

Every 4 years

3 items

Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

2 items

Replace inner tubes and rim tape with tires

Wheels and tires

Guideline
Replace tires on age (regardless of tread)

Wheels and tires

Guideline

No interval set

2 items

Spark plug (check)

Engine

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. C after the first 1,000 km.
Transmission oil (check)

Primary and gearbox

Factory

Factory: Scheduled maintenance chart (Husqvarna WRE - SMS 125 2011 owner's manual, appendix pp.A-2 to A-6, IT/EN/FR; to be carried out at the Husqvarna dealer; columns every 500 km, after the first 1,000 km, then 5,000, 10,000, 15,000 and 20,000 km, and replace if necessary). Codes: C = check, P = clean, S = change, L = lubricate, X = replace if necessary. C after the first 1,000 km.

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.