MotoService Log
No photo of this model in the library yet.
Hyosung · Shim-adjusted overhead-cam four-stroke single, wet sump, gearbox shares engine oil, CVT belt drive

MS3 250

Library entry covers 2006-2014

25 factory 32 guideline

Published source

Hyosung MS3 (125/250) Owner's Manual, 2007 edition, Periodic Maintenance p.57 (factory PDF, copy on archive.org)

Factory owner's handbook. Covers MS3 125 and 250 scooter, manual 2007.

Open the source

57 items for a 2007 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)
Engine cycle
Four-stroke
Engine lubrication
Wet sump (oil in crankcase)
Oil filtration
Replaceable cartridge or spin-on filter
Valve gear
Overhead cam, shim adjusted (incl. desmo)
Ignition
Electronic (CDI / transistor / ECU)
Charging
Alternator / stator with rectifier
Battery
Wet cell (flooded lead-acid, needs topping up)
Fuel system
Fuel injection
Cooling
Liquid cooled
Primary drive
Gear or chain inside engine, shares engine oil
Gearbox oil
Shares engine oil
Clutch control
Automatic or semi-automatic
Final drive
Belt CVT, scooter automatic
Front suspension
Telescopic fork
Rear suspension
Swingarm, single shock / cantilever
Front brake
Disc, hydraulic
Rear brake
Drum (or band / belt rim)
Wheels
Cast / alloy, tubeless
Sidecar
No sidecar
Maintenance schedule

2007 Hyosung MS3 250

On the road: every 300 km

1 item
  • Check engine oil level
    Pre-ride / on the road
    Guideline

    Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

2 items
  • Check lights, horn, brake light switches
    Pre-ride / on the road
    Guideline
  • Check tire pressures
    Pre-ride / on the road
    Guideline

On the road: every 800 km

1 item
  • Check coolant level
    Pre-ride / on the road
    Guideline

Every 1,600 km or 6 months

1 item
  • Adjust rear drum brake and rod / cable linkage
    Brakes
    Guideline

Every 3,000 km

1 item
  • Clean / inspect air filter
    Fuel and air
    Factory

    Manual: Air cleaner element. Factory: Clean every 3,000 km (printed across columns).

Every 4,000 km or 2 years

1 item
  • Replace brake fluid
    Brakes
    Factory

    Manual: Brake fluid. Factory: Inspect every 4,000 km; replace every 2 years.

Every 4,000 km or 4 years

3 items
  • Inspect coolant hoses and clamps
    Engine
    Factory

    Manual: Radiator hose. Factory: Inspect every 4,000 km (not at 1,000); replace every 4 years.

  • Replace fuel lines
    Fuel and air
    Factory

    Manual: Fuel hose. Factory: Inspect every 4,000 km; replace every 4 years.

  • Inspect brake hoses; replace old rubber
    Brakes
    Factory

    Manual: Brake hose. Factory: Inspect every 4,000 km; replace every 4 years.

Every 4,000 km

15 items
  • Change engine oil
    Engine
    Factory

    Manual: Engine oil. Factory: Replace at 1,000 km then every 4,000 km.

  • Chassis nuts and bolts
    Engine
    Factory

    Factory: Tighten.

  • Check and adjust valve clearances
    Engine
    Factory

    Manual: Valve clearance adjust. Factory: Inspect at 1,000 km then every 4,000 km. Cols: First 1,000 / Every 4,000 / Every 8,000 km.

  • Check cylinder head bolt torque
    Engine
    Factory

    Manual: Cylinder head bolt. Factory: Tighten at 1,000 km then every 4,000 km.

  • Exhaust pipe bolts and muffler mounting bolts
    Engine
    Factory

    Factory: Tighten at 1,000 km then every 4,000 km.

  • Idle speed
    Engine
    Factory

    Factory: Inspect.

  • Inspect, clean and gap spark plugs
    Engine
    Factory

    Manual: Spark plug. Factory: Clean/inspect at 1,000 km then every 4,000 km.

  • Replace oil filter
    Engine
    Factory

    Manual: Engine oil filter. Factory: Replace at 1,000 km then every 4,000 km.

  • Check throttle cable(s) free play and return
    Fuel and air
    Factory

    Manual: Throttle cable. Factory: Inspect.

  • Check steering head bearing adjustment
    Front end
    Factory

    Manual: Steering. Factory: Inspect.

  • Inspect fork seals, stanchions and fork boots
    Front end
    Factory

    Manual: Front forks. Factory: Inspect; not at 1,000 km.

  • Inspect rear shocks for leaks and damping
    Rear suspension and frame
    Factory

    Manual: Rear shock absorber. Factory: Inspect; not at 1,000 km.

  • Check brake pads and discs
    Brakes
    Factory

    Manual: Brake. Factory: Inspect.

  • Inspect tire tread, sidewalls and date codes
    Wheels and tires
    Factory

    Manual: Tire. Factory: Inspect.

  • Lubricate control cables and lever pivots
    Controls and cables
    Factory

    Manual: General lubrication. Factory: Lubricate; points: lever holders, stand, pedal, cables.

Every 5,000 km or 12 months

4 items
  • Adjust automatic / semi-automatic clutch
    Primary and gearbox
    Guideline
  • Check footrests, pegs, rear brake and gear lever pivots
    Rear suspension and frame
    Guideline
  • Grease and check center / side stand and springs
    Rear suspension and frame
    Guideline
  • Check wheel bearings for play
    Wheels and tires
    Guideline

Every 6,500 km or 12 months

2 items
  • Inspect CVT drive belt, rollers / sliders and clutch shoes
    Final drive
    Guideline

    Typical scooter interval. Your owner's manual figure governs; check belt width against the service limit.

  • Lubricate brake cam spindles, check linings and drums
    Brakes
    Guideline

Every 8,000 km

3 items
  • Replace spark plugs
    Engine
    Factory

    Manual: Spark plug. Factory: Replace in Every 8,000 km column.

  • Check gearbox oil level
    Primary and gearbox
    Factory

    Manual: Transmission oil. Factory: Inspect at 1,000 km and in Every 8,000 km column.

  • Inspect drive belt, pulleys and tension
    Final drive
    Factory

    Manual: Drive belt. Factory: Inspect, Every 8,000 km column only.

Every 9,500 km or 12 months

3 items
  • Check charging voltage and regulator / cut-out
    Ignition and electrics
    Guideline
  • Check swingarm bushes for play
    Rear suspension and frame
    Guideline
  • Lubricate speedometer / tachometer cables, check drive
    Controls and cables
    Guideline

    A dry speedo cable whips the needle and eventually kills the instrument.

Every 12,000 km

1 item
  • Replace air filter element
    Fuel and air
    Factory

    Manual: Air cleaner element. Factory: Replace every 12,000 km.

Every 16,000 km or 2 years

1 item
  • Compression test (or leak-down)
    Engine
    Guideline

Every 19,500 km or 2 years

3 items
  • Synchronize throttle bodies
    Fuel and air
    Guideline
  • Clean and grease rear suspension linkage
    Rear suspension and frame
    Guideline
  • Grease swingarm pivot
    Rear suspension and frame
    Guideline

Every 19,500 km or 3 years

1 item
  • Replace CVT drive belt
    Final drive
    Guideline

    Typical scooter interval, or sooner if the belt is cracked, glazed or below its width limit.

Every 24,000 km or 3 years

1 item
  • Change fork oil
    Front end
    Guideline

    Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 24,000 km or 4 years

1 item
  • Check valve clearances (shim adjusted)
    Engine
    Guideline

Every 24,000 km

1 item
  • Replace brake linings / skim drums (wear based)
    Brakes
    Guideline

Every 32,000 km or 4 years

2 items
  • Repack / replace steering head bearings
    Front end
    Guideline

    Many old machines use loose balls in cups and cones. Taper roller conversions are common.

  • Repack / replace wheel bearings
    Wheels and tires
    Guideline

    Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 38,500 km or 4 years

1 item
  • Replace fuel filter
    Fuel and air
    Guideline

Every 40,000 km or 6 years

1 item
  • Replace swingarm bushes / bearings
    Rear suspension and frame
    Guideline

Every 48,500 km or 6 years

1 item
  • Rebuild forks: seals, bushes, springs
    Front end
    Guideline

Every 6 months

1 item
  • Clean battery terminals, check charge and strap
    Ignition and electrics
    Guideline

Every 2 years

3 items
  • Replace coolant
    Engine
    Factory

    Manual: Engine coolant. Factory: Replace every 2 years.

  • Inspect wiring, bullet connectors and ground points
    Ignition and electrics
    Guideline
  • Inspect frame, welds and lugs for cracks
    Rear suspension and frame
    Guideline

Every 4 years

1 item
  • Rebuild calipers and master cylinders (seals)
    Brakes
    Guideline

Every 6 years

1 item
  • Replace tires on age (regardless of tread)
    Wheels and tires
    Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.

Keep up with this schedule on your phone

Add the bike in the app and this chart loads itself, ready to log against and edit.

Coming soon to Google Play

Other 2007 Hyosung models

All 2007 Hyosung