No photo of this model in the library yet.

Indian · Modern belt-drive cruiser (2000-)

Chief 1900

Library entry covers 2021-2024

16 factory 26 guideline

Published source

2022 Indian Chief Rider's Manual (P/N 9939939), Periodic Maintenance tables

Factory owner's handbook. Covers 2022 Indian Chief (Thunderstroke 116); tables 500 mi to 45,000 mi, restart after 50,000 mi.

Open the source

42 items for a 2021 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Hydraulic lifters (no routine clearance adjustment)
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Air / oil cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Shares engine oil
Clutch control: Hand lever, cable
Final drive: Toothed belt
Front suspension: Telescopic fork
Rear suspension: Swingarm, twin shocks
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

2021 Indian Chief 1900

On the road: every 200 mi

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 300 mi

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

Every 3,000 mi or 12 months

4 items

Check throttle cable(s) free play and return

Fuel and air

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 5,000 mi

11 items

Change engine oil

Engine

Factory

Manual: Engine Oil & Filter Change. Factory: First at 500 mi (800 km), then each 5,000 mi (8,000 km) service.
Replace oil filter

Engine

Factory

Manual: Engine Oil & Filter Change. Factory: Changed with oil each 5,000 mi (8,000 km) service.
Clean / inspect air filter

Fuel and air

Factory

Manual: Air Filter. Factory: Inspect; clean. From 2,500 mi (4,000 km), then each 5,000 mi service.
Clean battery terminals, check charge and strap

Ignition and electrics

Factory

Manual: Battery. Factory: Check terminals; clean; test.
Adjust clutch free play, lubricate cable and lever pivot

Primary and gearbox

Factory

Manual: Clutch Cable Freeplay. Factory: Inspect; adjust if necessary, every service table.
Inspect drive belt, pulleys and tension

Final drive

Factory

Manual: Drive Belt. Factory: Inspect; tighten, clean, adjust. Every service table, 500 mi on.
Check steering head bearing adjustment

Front end

Factory

Manual: Steering Bearings. Factory: Inspect, every service table.
Grease and check center / side stand and springs

Rear suspension and frame

Factory

Manual: Sidestand. Factory: Lubricate, every service table.
Check brake pads and discs

Brakes

Factory

Manual: Brake Pads. Factory: Inspect pad wear; replace if worn beyond service limit.
Inspect tire tread, sidewalls and date codes

Wheels and tires

Factory

Manual: Tires / Wheels. Factory: Inspect tread depth, sidewall cracking, wear patterns.
Lubricate control cables and lever pivots

Controls and cables

Factory

Manual: Control Cable Ends. Factory: Inspect; lubricate, at 500 mi then each 5,000 mi.

Every 6,000 mi or 12 months

4 items

Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 10,000 mi

2 items

Compression test (or leak-down)

Engine

Factory

Manual: Engine Compression. Factory: Inspect; correct if necessary.
Inspect, clean and gap spark plugs

Engine

Factory

Manual: Spark Plugs. Factory: Inspect; torque to specification.

Every 12,000 mi or 2 years

3 items

Replace air filter element

Fuel and air

Guideline
Synchronize throttle bodies

Fuel and air

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 15,000 mi or 2 years

1 item

Change fork oil

Front end

Factory

Manual: Front Fork Oil. Factory: Replace at 15,000 and 30,000 mi services or every 2 years.

Every 20,000 mi or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 24,000 mi or 4 years

1 item

Replace fuel filter

Fuel and air

Guideline

Every 25,000 mi or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 30,000 mi or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 30,000 mi

1 item

Replace spark plugs

Engine

Factory

Manual: Spark Plugs. Factory: Replace at 30,000 mi; inspect and torque at 10,000/20,000/40,000 mi.

Every 50,000 mi

1 item

Replace drive belt (wear or damage based)

Final drive

Guideline

Every 2 years

3 items

Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Replace brake fluid

Brakes

Factory

Manual: Brake Fluid. Factory: Change every two years (DOT 4); replace listed at 10,000/20,000/30,000/40,000 mi.

Every 4 years

3 items

Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.