No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

Jawa · Overhead-cam four-stroke single, wet sump, gearbox shares engine oil, chain drive

300 CL

Library entry covers 2023-2025

41 factory 54 guideline

Published source

JAWA 300 CL Navod k obsluze (846 00 011), Planovani udrzby pp.71-73

Factory owner's handbook. Covers JAWA 300 CL owner's manual (typ 846, 846 00 011), 1st edition 2020, Czech.

95 items for a 2025 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, screw/locknut adjusters
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Liquid cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Shares engine oil
Clutch control: Hand lever, cable
Final drive: Chain
Front suspension: Telescopic fork
Rear suspension: Swingarm, twin shocks
Front brake: Disc, hydraulic
Rear brake: Drum (or band / belt rim)
Wheels: Spoked, tubed
Sidecar: No sidecar

Maintenance schedule

2025 Jawa 300 CL

On the road: every 300 km

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

3 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline
Lubricate drive chain

Pre-ride / on the road

Guideline

Lube warm, ideally at the end of the riding day so it soaks in overnight. Sooner after rain.

On the road: every 800 km

1 item

Check coolant level

Pre-ride / on the road

Guideline

On the road: every 1,000 km

1 item

Check chain slack and rear wheel alignment

Pre-ride / on the road

Guideline

Every 1,000 km

1 item

Drive chain tension and wear (check, lubricate)

Final drive

Factory

Factory: Maintenance plan (p.71): ** I, L every 1,000 km; adjust in time. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.

Every 1,600 km or 6 months

2 items

Adjust rear drum brake and rod / cable linkage

Brakes

Guideline
Inspect tire tread, sidewalls and date codes

Wheels and tires

Guideline

Every 5,000 km or 12 months

10 items

Check throttle cable(s) free play and return

Fuel and air

Guideline
Clean drive chain thoroughly (remove and soak, re-lube)

Final drive

Guideline

Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.
Inspect chain and sprockets for wear (measure stretch)

Final drive

Guideline
Check steering head bearing adjustment

Front end

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline
Check brake pads and discs

Brakes

Guideline
Check spoke tension and wheel true

Wheels and tires

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 6,000 km or 6 months

24 items

Coolant level (check)

Engine

Factory

Factory: Maintenance plan (p.71): I at every service. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Cooling system hoses and fan (check)

Engine

Factory

Factory: Maintenance plan (p.71): ** I at every service. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Drain plug washer (replace)

Engine

Factory

Factory: Maintenance plan (p.71): R at every service. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Engine oil (replace)

Engine

Factory

Factory: Maintenance plan (p.71): ** R at every service. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Exhaust bolt locking (check)

Engine

Factory

Factory: Maintenance plan (p.73): ** I at every service. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Nuts, bolts and clips (check)

Engine

Factory

Factory: Maintenance plan (p.72): ** I at every service. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Additional fuel filter (check)

Fuel and air

Factory

Factory: Maintenance plan (p.71): ** I at 12,000, 18,000 and 36,000 km. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Air filter (clean)

Fuel and air

Factory

Factory: Maintenance plan (p.71): ** C at 1,000, 6,000, 18,000 and 30,000 km. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
EFI electronic fuel injection (check flow, adjust)

Fuel and air

Factory

Factory: Maintenance plan (p.72): *** D, A at every service. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Fuel line (check)

Fuel and air

Factory

Factory: Maintenance plan (p.71): ** I at every service. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Battery voltage, terminals and grease (check)

Ignition and electrics

Factory

Factory: Maintenance plan (p.72): * I at every service. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Clutch and free play (check)

Primary and gearbox

Factory

Factory: Maintenance plan (p.72): ** I at every service. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Front fork oil leaks (check)

Front end

Factory

Factory: Maintenance plan (p.72): ** check at every service. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Shock absorbers (check)

Rear suspension and frame

Factory

Factory: Maintenance plan (p.72): ** I at every service. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Side and center stands (check)

Rear suspension and frame

Factory

Factory: Maintenance plan (p.72): ** I at every service. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Side stand pivot and passenger footpegs (lubricate)

Rear suspension and frame

Factory

Factory: Maintenance plan (p.72): ** L at every service. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Swingarm bearings (check)

Rear suspension and frame

Factory

Factory: Maintenance plan (p.72): *** I at 12,000 and 18,000 km. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Brake fluid level and leaks (check)

Brakes

Factory

Factory: Maintenance plan (p.71): ** I at the other services. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Front brake pads and rear brake shoes (check, replace)

Brakes

Factory

Factory: Maintenance plan (p.71): ** I at 6,000 km; I/R at 12,000 km and every service after. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Front and rear wheel bolts (check, tighten)

Wheels and tires

Factory

Factory: Maintenance plan (p.71): *** I, T at every service. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Wheel bearings (check)

Wheels and tires

Factory

Factory: Maintenance plan (p.72): *** I at 12,000 and 18,000 km. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Wheel spokes and rims (check, tighten)

Wheels and tires

Factory

Factory: Maintenance plan (p.72): *** I, T at every service. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
All cables (check)

Controls and cables

Factory

Factory: Maintenance plan (p.72): ** I at every service. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Throttle control (check)

Controls and cables

Factory

Factory: Maintenance plan (p.71): I at every service. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.

Every 6,500 km or 12 months

3 items

Inspect, clean and gap spark plugs

Engine

Guideline
Adjust clutch free play, lubricate cable and lever pivot

Primary and gearbox

Guideline
Lubricate brake cam spindles, check linings and drums

Brakes

Guideline

Every 8,000 km or 12 months

2 items

Change engine oil

Engine

Guideline

Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.
Replace oil filter

Engine

Guideline

Every 9,500 km or 12 months

7 items

Inspect coolant hoses and clamps

Engine

Guideline
Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 12,000 km or 12 months

7 items

Oil filter (replace)

Engine

Factory

Factory: Maintenance plan (p.71): R at 1,000, 12,000, 24,000 and 36,000 km. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Air filter (replace)

Fuel and air

Factory

Factory: Maintenance plan (p.71): ** R at 12,000, 24,000 and 36,000 km. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Fuel pump filter (check fuel flow)

Fuel and air

Factory

Factory: Maintenance plan (p.71): *** I/R at 12,000 km: check fuel flow; if wrong, check the fuel pump and replace if needed. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Chain slider (check)

Final drive

Factory

Factory: Maintenance plan (p.71): *** I at 12,000, 24,000 and 36,000 km. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Steering bearings (check)

Front end

Factory

Factory: Maintenance plan (p.72): *** I at 1,000, 12,000 and 24,000 km. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Brake light switches (check)

Brakes

Factory

Factory: Maintenance plan (p.71): ** I at 12,000, 24,000 and 36,000 km. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Tires and wheels (check)

Wheels and tires

Factory

Factory: Maintenance plan (p.72): *** I at 12,000, 24,000 and 36,000 km. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.

Every 13,000 km or 2 years

1 item

Check and adjust valve clearances

Engine

Guideline

Every 16,000 km or 2 years

1 item

Compression test (or leak-down)

Engine

Guideline

Every 18,000 km or 18 months

2 items

Steering bearings (replace)

Front end

Factory

Factory: Maintenance plan (p.72): *** R at 18,000 and 36,000 km. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Brake fluid (replace)

Brakes

Factory

Factory: Maintenance plan (p.71): ** R at 18,000 and 36,000 km. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.

Every 19,500 km or 2 years

3 items

Replace air filter element

Fuel and air

Guideline
Synchronize throttle bodies

Fuel and air

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 24,000 km or 2 years

3 items

Oil filter screen (clean)

Engine

Factory

Factory: Maintenance plan (p.71): *** C at 1,000 and 24,000 km. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Valve clearance (check)

Engine

Factory

Factory: Maintenance plan (p.71): *** I at 1,000 and 24,000 km. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Additional fuel filter (replace)

Fuel and air

Factory

Factory: Maintenance plan (p.71): ** R at 24,000 km. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.

Every 24,000 km or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 24,000 km

2 items

Spark plug (check)

Engine

Factory

Factory: Maintenance plan (p.71): ** I every 24,000 km. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.
Replace brake linings / skim drums (wear based)

Brakes

Guideline

Every 25,500 km or 4 years

1 item

Replace spark plugs

Engine

Guideline

Every 29,000 km

1 item

Replace chain and sprockets (wear based)

Final drive

Guideline

Every 32,000 km or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 36,000 km or 3 years

1 item

Front fork oil (replace)

Front end

Factory

Factory: Maintenance plan (p.72): ** replace at 36,000 km. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.

Every 38,500 km or 4 years

1 item

Replace fuel filter

Fuel and air

Guideline

Every 40,000 km or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 48,000 km

1 item

Spark plug (replace)

Engine

Factory

Factory: Maintenance plan (p.71): ** R every 48,000 km. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.

Every 48,500 km or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

4 items

Replace coolant

Engine

Guideline
Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Replace brake fluid

Brakes

Guideline

Every 4 years

3 items

Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

2 items

Replace inner tubes and rim tape with tires

Wheels and tires

Guideline
Replace tires on age (regardless of tread)

Wheels and tires

Guideline

No interval set

1 item

Malfunction indicator lamp (MIL)

Engine

Factory

Factory: Maintenance plan (p.73): ** check if the lamp signals a fault. Columns, whichever comes first: service 1 at 1,000 km or 1 month, then 6,000/6, 12,000/12, 18,000/18, 24,000/24, 30,000/30 and 36,000 km/36 months. Codes: I = check; C = clean; R = replace; L = lubricate; D = check flow; A = adjust; T = tighten. * = owner can do; ** = specialist service recommended; *** = specialist service only. Translated from the Czech edition.

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.