MotoService Log
Kawasaki Vulcan 2000 (VN2000)
Example photo: Christian Ammering, CC BY-SA 3.0, Wikimedia Commons
Kawasaki · Hydraulic-lifter four-stroke, wet sump, gearbox shares engine oil, belt drive

Vulcan 2000 (VN2000)

Library entry covers 2004-2010

46 factory 29 guideline

Published source

Kawasaki VN2000 Vulcan Service Manual, Periodic Maintenance Chart 2-2 to 2-4

Factory workshop manual. Covers VN2000 A1 (2004) service manual.

75 items for a 2007 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)
Engine cycle
Four-stroke
Engine lubrication
Wet sump (oil in crankcase)
Oil filtration
Replaceable cartridge or spin-on filter
Valve gear
Hydraulic lifters (no routine clearance adjustment)
Ignition
Electronic (CDI / transistor / ECU)
Charging
Alternator / stator with rectifier
Battery
Wet cell (flooded lead-acid, needs topping up)
Fuel system
Fuel injection
Cooling
Liquid cooled
Primary drive
Gear or chain inside engine, shares engine oil
Gearbox oil
Shares engine oil
Clutch control
Hand lever, cable
Final drive
Toothed belt
Front suspension
Telescopic fork
Rear suspension
Swingarm, twin shocks
Front brake
Disc, hydraulic
Rear brake
Disc, hydraulic
Wheels
Cast / alloy, tubeless
Sidecar
No sidecar
Maintenance schedule

2007 Kawasaki Vulcan 2000 (VN2000)

On the road: every 300 km

1 item
  • Check engine oil level
    Pre-ride / on the road
    Guideline

    Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

2 items
  • Check lights, horn, brake light switches
    Pre-ride / on the road
    Guideline
  • Check tire pressures
    Pre-ride / on the road
    Guideline

On the road: every 800 km

1 item
  • Check coolant level
    Pre-ride / on the road
    Guideline

Every 1,600 km or 6 months

1 item
  • Inspect tire tread, sidewalls and date codes
    Wheels and tires
    Guideline

Every 5,000 km or 12 months

6 items
  • Check throttle cable(s) free play and return
    Fuel and air
    Guideline
  • Check steering head bearing adjustment
    Front end
    Guideline
  • Inspect fork seals, stanchions and fork boots
    Front end
    Guideline
  • Check footrests, pegs, rear brake and gear lever pivots
    Rear suspension and frame
    Guideline
  • Grease and check center / side stand and springs
    Rear suspension and frame
    Guideline
  • Check wheel bearings for play
    Wheels and tires
    Guideline

Every 6,000 km or 6 months

1 item
  • Brake fluid level - inspect
    Brakes
    Factory

    Factory: As printed: Every 6 month; • at 1 (0.6), 6 (4), 12 (7.5), 18 (12), 24 (15), 30 (20), 36 (24) x 1000 km (x 1000 mile)

Every 6,000 km or 12 months

4 items
  • Brake fluid leak (brake hose and pipe)-inspect
    Brakes
    Factory

    Factory: As printed: Every year; • at 1 (0.6), 6 (4), 12 (7.5), 18 (12), 24 (15), 30 (20), 36 (24) x 1000 km (x 1000 mile)

  • Brake hose damage - inspect
    Brakes
    Factory

    Factory: As printed: Every year; • at 1 (0.6), 6 (4), 12 (7.5), 18 (12), 24 (15), 30 (20), 36 (24) x 1000 km (x 1000 mile)

  • Brake hose installation condition - inspect
    Brakes
    Factory

    Factory: As printed: Every year; • at 1 (0.6), 6 (4), 12 (7.5), 18 (12), 24 (15), 30 (20), 36 (24) x 1000 km (x 1000 mile)

  • Brake operation (effectiveness, no drag) - inspect
    Brakes
    Factory

    Factory: As printed: Every year; • at 1 (0.6), 6 (4), 12 (7.5), 18 (12), 24 (15), 30 (20), 36 (24) x 1000 km (x 1000 mile)

Every 6,000 km

4 items
  • Inspect drive belt, pulleys and tension
    Final drive
    Factory

    Manual: Belt deflection / belt wear and damage - inspect. Factory: Initial 1,000 km; then every 6,000 km

  • Brake light switch operation - inspect
    Brakes
    Factory

    Factory: As printed: • at 1 (0.6), 6 (4), 12 (7.5), 18 (12), 24 (15), 30 (20), 36 (24) x 1000 km (x 1000 mile)

  • Check brake pads and discs
    Brakes
    Factory

    Manual: Brake pad wear - inspect. Factory: Every column from 6,000 km

  • Evaporative emission control system function - inspect (Evaporative Emission Control System (CAL))
    Controls and cables
    Factory

    Factory: As printed: • at 1 (0.6), 6 (4), 12 (7.5), 18 (12), 24 (15), 30 (20), 36 (24) x 1000 km (x 1000 mile)

Every 6,500 km or 12 months

1 item
  • Adjust clutch free play, lubricate cable and lever pivot
    Primary and gearbox
    Guideline

Every 9,500 km or 12 months

5 items
  • Clean / inspect air filter
    Fuel and air
    Guideline

    Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.

  • Check charging voltage and regulator / cut-out
    Ignition and electrics
    Guideline
  • Check swingarm bushes for play
    Rear suspension and frame
    Guideline
  • Inspect rear shocks for leaks and damping
    Rear suspension and frame
    Guideline
  • Lubricate speedometer / tachometer cables, check drive
    Controls and cables
    Guideline

    A dry speedo cable whips the needle and eventually kills the instrument.

Every 12,000 km or 12 months

18 items
  • Change engine oil
    Engine
    Factory

    Manual: Engine oil - change. Factory: Initial 1,000 km (600 mi); columns 1/6/12/18/24/30/36 x1000 km (0.6/4/7.5/12/15/20/24 mi)

  • Coolant leak (radiator hose and pipe) - inspect
    Engine
    Factory

    Factory: As printed: Every year; • at 1 (0.6), 12 (7.5), 24 (15), 36 (24) x 1000 km (x 1000 mile)

  • Engine stop switch operation - inspect
    Engine
    Factory

    Factory: As printed: Every year; • at 12 (7.5), 24 (15), 36 (24) x 1000 km (x 1000 mile)

  • Headlight aiming - inspect
    Engine
    Factory

    Factory: As printed: Every year; • at 12 (7.5), 24 (15), 36 (24) x 1000 km (x 1000 mile)

  • Lights and switches operation - inspect
    Engine
    Factory

    Factory: As printed: Every year; • at 12 (7.5), 24 (15), 36 (24) x 1000 km (x 1000 mile)

  • Radiator hose and pipe damage - inspect
    Engine
    Factory

    Factory: As printed: Every year; • at 1 (0.6), 12 (7.5), 24 (15), 36 (24) x 1000 km (x 1000 mile)

  • Radiator hose and pipe installation condition - inspect
    Engine
    Factory

    Factory: As printed: Every year; • at 1 (0.6), 12 (7.5), 24 (15), 36 (24) x 1000 km (x 1000 mile)

  • Replace oil filter
    Engine
    Factory

    Manual: Oil filter - replace. Factory: Replaced with oil

  • Fuel hoses and pipe damage - inspect
    Fuel and air
    Factory

    Factory: As printed: Every year; • at 1 (0.6), 12 (7.5), 24 (15), 36 (24) x 1000 km (x 1000 mile)

  • Fuel hoses and pipe installation condition - inspect
    Fuel and air
    Factory

    Factory: As printed: Every year; • at 1 (0.6), 12 (7.5), 24 (15), 36 (24) x 1000 km (x 1000 mile)

  • Fuel leak (fuel hose and pipe) - inspect
    Fuel and air
    Factory

    Factory: As printed: Every year; • at 1 (0.6), 12 (7.5), 24 (15), 36 (24) x 1000 km (x 1000 mile)

  • Front forks/rear shock absorber oil leak - inspect
    Front end
    Factory

    Factory: As printed: Every year; • at 12 (7.5), 24 (15), 36 (24) x 1000 km (x 1000 mile)

  • Steering play - inspect
    Front end
    Factory

    Factory: As printed: Every year; • at 1 (0.6), 12 (7.5), 24 (15), 36 (24) x 1000 km (x 1000 mile)

  • Side stand switch operation - inspect
    Rear suspension and frame
    Factory

    Factory: As printed: Every year; • at 12 (7.5), 24 (15), 36 (24) x 1000 km (x 1000 mile)

  • Tire air pressure - inspect
    Wheels and tires
    Factory

    Factory: As printed: Every year; • at 12 (7.5), 24 (15), 36 (24) x 1000 km (x 1000 mile)

  • Wheel bearing damage - inspect
    Wheels and tires
    Factory

    Factory: As printed: Every year; • at 12 (7.5), 24 (15), 36 (24) x 1000 km (x 1000 mile)

  • Lubricate control cables and lever pivots
    Controls and cables
    Factory

    Manual: Chassis parts - lubricate. Factory: Year; marked at 12/24/36 x1000 km

  • Throttle control system (play, smooth return, no drag) - inspect
    Controls and cables
    Factory

    Factory: As printed: Every year; • at 1 (0.6), 12 (7.5), 24 (15), 36 (24) x 1000 km (x 1000 mile)

Every 12,000 km

9 items
  • Air suction system damage - inspect
    Engine
    Factory

    Factory: As printed: • at 12 (7.5), 24 (15), 36 (24) x 1000 km (x 1000 mile)

  • Bolts and nuts tightness - inspect
    Engine
    Factory

    Factory: As printed: • at 1 (0.6), 12 (7.5), 24 (15), 36 (24) x 1000 km (x 1000 mile)

  • Coolant level - inspect
    Engine
    Factory

    Factory: As printed: • at 1 (0.6), 12 (7.5), 24 (15), 36 (24) x 1000 km (x 1000 mile)

  • Idle speed - inspect
    Engine
    Factory

    Factory: As printed: • at 1 (0.6), 12 (7.5), 24 (15), 36 (24) x 1000 km (x 1000 mile)

  • Inspect, clean and gap spark plugs
    Engine
    Factory

    Manual: Spark plug condition - inspect. Factory: Marked at 12/24/36 x1000 km

  • Clutch operation (play, disengagement, engagement) - inspect
    Primary and gearbox
    Factory

    Factory: As printed: • at 1 (0.6), 12 (7.5), 24 (15), 36 (24) x 1000 km (x 1000 mile)

  • Front forks/rear shock absorber operation (smooth stroke) - inspect
    Front end
    Factory

    Factory: As printed: • at 12 (7.5), 24 (15), 36 (24) x 1000 km (x 1000 mile)

  • Tire tread wear, abnormal wear - inspect
    Wheels and tires
    Factory

    Factory: As printed: • at 12 (7.5), 24 (15), 36 (24) x 1000 km (x 1000 mile)

  • Wheel/tire damage - inspect
    Wheels and tires
    Factory

    Factory: As printed: • at 12 (7.5), 24 (15), 36 (24) x 1000 km (x 1000 mile)

Every 16,000 km or 2 years

1 item
  • Compression test (or leak-down)
    Engine
    Guideline

Every 19,500 km or 2 years

1 item
  • Synchronize throttle bodies
    Fuel and air
    Guideline

Every 24,000 km or 2 years

2 items
  • Repack / replace steering head bearings
    Front end
    Factory

    Manual: Steering stem bearing - lubricate. Factory: 2 years; marked at 24,000 km

  • Replace brake fluid
    Brakes
    Factory

    Manual: Brake fluid - change. Factory: 2 years; marked at 24,000 and 48,000 km

Every 24,000 km or 3 years

1 item
  • Change fork oil
    Front end
    Guideline

    Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 24,000 km

1 item
  • Grease swingarm pivot
    Rear suspension and frame
    Factory

    Manual: Swingarm pivot - lubrication. Factory: Marked at 24,000 km

Every 32,000 km or 4 years

1 item
  • Repack / replace wheel bearings
    Wheels and tires
    Guideline

    Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 36,000 km or 3 years

2 items
  • Inspect coolant hoses and clamps
    Engine
    Factory

    Manual: Radiator hose and O-ring - replace. Factory: 3 years

  • Replace coolant
    Engine
    Factory

    Manual: Coolant - change. Factory: 3 years; marked at 36,000 km

Every 36,000 km

1 item
  • Replace air filter element
    Fuel and air
    Factory

    Manual: Air cleaner element - replace. Factory: Single mark at 36,000 km (24,000 mi)

Every 38,500 km or 4 years

1 item
  • Replace fuel filter
    Fuel and air
    Guideline

Every 40,000 km or 6 years

1 item
  • Replace swingarm bushes / bearings
    Rear suspension and frame
    Guideline

Every 48,000 km or 4 years

3 items
  • Replace fuel lines
    Fuel and air
    Factory

    Manual: Fuel hose - replace. Factory: 4 years

  • Inspect brake hoses; replace old rubber
    Brakes
    Factory

    Manual: Brake hoses and pipes - replace. Factory: 4 years

  • Rebuild calipers and master cylinders (seals)
    Brakes
    Factory

    Manual: Rubber parts of master cylinder and caliper - replace. Factory: 4 years

Every 48,000 km

1 item
  • Replace spark plugs
    Engine
    Factory

    Manual: Spark plug - replace. Factory: Single mark at 48,000 km (30,000 mi)

Every 48,500 km or 6 years

1 item
  • Rebuild forks: seals, bushes, springs
    Front end
    Guideline

Every 80,500 km

1 item
  • Replace drive belt (wear or damage based)
    Final drive
    Guideline

Every 6 months

1 item
  • Clean battery terminals, check charge and strap
    Ignition and electrics
    Guideline

Every 2 years

2 items
  • Inspect wiring, bullet connectors and ground points
    Ignition and electrics
    Guideline
  • Inspect frame, welds and lugs for cracks
    Rear suspension and frame
    Guideline

Every 6 years

1 item
  • Replace tires on age (regardless of tread)
    Wheels and tires
    Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.

Keep up with this schedule on your phone

Add the bike in the app and this chart loads itself, ready to log against and edit.

Coming soon to Google Play

Other 2007 Kawasaki models

All 2007 Kawasaki