No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

Kawasaki · Shim-adjusted overhead-cam four-stroke, wet sump, gearbox shares engine oil, chain drive

ZZR 1100

Library entry covers 1990-2001

34 factory 28 guideline

Published source

Kawasaki Ninja ZX-11 / ZZ-R1100 (ZX1100-C2) Motorcycle Owner's Manual, Periodic Maintenance Chart pp. 61-63

Factory owner's handbook. Covers 1991 (ZX1100-C2 owner's manual; chart km (mi)).

Open the source

62 items for a 1997 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, shim adjusted (incl. desmo)
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Two or more carburetors
Cooling: Liquid cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Shares engine oil
Clutch control: Hand lever, cable
Final drive: Chain
Front suspension: Telescopic fork
Rear suspension: Swingarm, single shock / cantilever
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

1997 Kawasaki ZZR 1100

On the road: every 200 mi

2 items

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.
Lubricate drive chain

Pre-ride / on the road

Factory

Manual: Drive chain - lubricate. Factory: Every 300 km (200 mi)

On the road: every 300 mi

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

On the road: every 500 mi

2 items

Check chain slack and rear wheel alignment

Pre-ride / on the road

Factory

Manual: Drive chain slack - check. Factory: Every 800 km (500 mi)
Check coolant level

Pre-ride / on the road

Guideline

Every 3,000 mi or 1 month

2 items

Check battery electrolyte, top up with distilled water

Ignition and electrics

Factory

Manual: Battery electrolyte level - check. Factory: Every month or every column
Brake/clutch fluid level - check

Brakes

Factory

Factory: Every month or every column

Every 3,000 mi or 12 months

7 items

Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Clean fuel tap filter / sediment bowl

Fuel and air

Guideline
Clean drive chain thoroughly (remove and soak, re-lube)

Final drive

Guideline

Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 3,000 mi

10 items

Air suction valve - check

Engine

Factory

Factory: Every column from 5,000 km
Idle speed - check

Engine

Factory

Factory: Initial 800 km; then every column
Inspect, clean and gap spark plugs

Engine

Factory

Manual: Spark plug - clean and gap. Factory: Every column from 5,000 km (3,000 mi)
Synchronize carburetors

Fuel and air

Factory

Manual: Carburetor synchronization - check. Factory: Initial 800 km; then every column
Inspect chain and sprockets for wear (measure stretch)

Final drive

Factory

Manual: Drive chain wear - check. Factory: Every column from 5,000 km
Check steering head bearing adjustment

Front end

Factory

Manual: Steering - check. Factory: Initial 800 km; then every column
Brake light switch - check

Brakes

Factory

Factory: Initial 800 km; then every column
Check brake pads and discs

Brakes

Factory

Manual: Brake pad wear - check. Factory: Every column from 5,000 km
Inspect tire tread, sidewalls and date codes

Wheels and tires

Factory

Manual: Tire wear - check. Factory: Every column from 5,000 km
Lubricate control cables and lever pivots

Controls and cables

Factory

Manual: General lubrication - perform. Factory: Every column from 5,000 km

Every 4,000 mi or 12 months

1 item

Adjust clutch free play, lubricate cable and lever pivot

Primary and gearbox

Guideline

Every 6,000 mi or 12 months

7 items

Change engine oil

Engine

Factory

Manual: Engine oil - change. Factory: Initial 800 km (500 mi); columns 800/5,000/10,000 ... 30,000 km; repeat beyond
Inspect coolant hoses and clamps

Engine

Factory

Manual: Radiator hoses, connections - check. Factory: Initial 800 km; then 10,000/20,000/30,000 km or yearly
Clean carburetor float bowl(s), check float level and jets

Fuel and air

Guideline

Ethanol fuel varnishes old carbs quickly in storage.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 6,000 mi

8 items

Check valve clearances (shim adjusted)

Engine

Factory

Manual: Valve clearance - check. Factory: Initial 800 km; then 10,000/20,000/30,000 km
Nut, bolt, fastener tightness - check

Engine

Factory

Factory: Initial 800 km; then 10,000/20,000/30,000 km
Replace oil filter

Engine

Factory

Manual: Oil filter - replace. Factory: Initial 800 km; then 10,000/20,000/30,000 km
Check throttle cable(s) free play and return

Fuel and air

Factory

Manual: Throttle grip play - check. Factory: Initial 800 km; then 10,000/20,000/30,000 km
Fuel system - check

Fuel and air

Factory

Factory: Marked at 10,000/20,000/30,000 km
Replace fuel filter

Fuel and air

Factory

Manual: Fuel filter - replace. Factory: Marked at 5,000/15,000/25,000 km (3,000/9,000/15,000 mi)
Clean and grease rear suspension linkage

Rear suspension and frame

Factory

Manual: Swing arm pivot, uni-trak linkage - lubricate. Factory: Marked at 10,000/20,000/30,000 km
Grease swingarm pivot

Rear suspension and frame

Factory

Manual: Swing arm pivot, uni-trak linkage - lubricate. Factory: Marked at 10,000/20,000/30,000 km

Every 8,000 mi or 2 years

1 item

Replace spark plugs

Engine

Guideline

Every 10,000 mi or 2 years

1 item

Compression test (or leak-down)

Engine

Guideline

Every 12,000 mi or 2 years

3 items

Replace hydraulic clutch fluid

Primary and gearbox

Factory

Manual: Brake/clutch fluid - change. Factory: Same row as brake fluid; hydraulic clutch
Repack / replace steering head bearings

Front end

Factory

Manual: Steering stem bearing - lubricate. Factory: Marked at 20,000 km (12,000 mi) or 2 years
Replace brake fluid

Brakes

Factory

Manual: Brake/clutch fluid - change. Factory: Marked at 20,000 km (12,000 mi) or 2 years

Every 12,000 mi

1 item

Replace air filter element

Fuel and air

Factory

Manual: Air cleaner element and air vent filter - replace. Factory: Marked at 20,000 km (12,000 mi), or every 5 cleanings

Every 18,000 mi or 2 years

1 item

Replace coolant

Engine

Factory

Manual: Coolant - change. Factory: Marked at 30,000 km (18,000 mi) or 2 years

Every 18,000 mi

2 items

Replace chain and sprockets (wear based)

Final drive

Guideline
Change fork oil

Front end

Factory

Manual: Front fork oil - change. Factory: Marked only at 30,000 km (18,000 mi)

Every 20,000 mi or 4 years

1 item

Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 25,000 mi or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 30,000 mi or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 12 months

1 item

Check speedometer / odometer against a known distance

Controls and cables

Guideline

Old speedos drift with tire size and drive wear. Use phone GPS over a measured 10 miles / km.

Every 2 years

4 items

Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Clutch slave cylinder piston seal - replace

Primary and gearbox

Factory

Factory: Every 2 years
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Factory

Manual: Caliper piston seal and dust seal - replace. Factory: Every 2 years; master cylinder cup and dust seal also 2 years

Every 4 years

2 items

Replace fuel lines

Fuel and air

Factory

Manual: Fuel hose - replace. Factory: Every 4 years
Inspect brake hoses; replace old rubber

Brakes

Factory

Manual: Brake hose/clutch hose and pipe - replace. Factory: Every 4 years

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.