MotoService Log
No photo of this model in the library yet.
KTM · Two-stroke single, premix, chain drive

EXC 125

Library entry covers 1999-2016

40 factory 52 guideline

Published source

KTM 125 EXC EU 2014 Owner's Manual, Service schedule (ManualsLib 584650 pages 48-49)

Factory source. Covers 2014 owner's manual, Art. no. 3213034en (prints 125 EXC EU and 125 EXC Six Days EU); catalog row spans more years, others not checked.

92 items for a 2010 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)
Engine cycle
Two-stroke
Engine lubrication
Two-stroke premix (oil in fuel)
Oil filtration
None (no filter)
Valve gear
None (two-stroke porting)
Ignition
Electronic (CDI / transistor / ECU)
Charging
Alternator / stator with rectifier
Battery
Wet cell (flooded lead-acid, needs topping up)
Fuel system
Single carburetor
Cooling
Liquid cooled
Primary drive
Gear or chain inside engine, shares engine oil
Gearbox oil
Separate gearbox oil
Clutch control
Hand lever, cable
Final drive
Chain
Front suspension
Telescopic fork
Rear suspension
Swingarm, single shock / cantilever
Front brake
Disc, hydraulic
Rear brake
Disc, hydraulic
Wheels
Spoked, tubed
Sidecar
No sidecar
Maintenance schedule

2010 KTM EXC 125

On the road: every 150 mi

1 item
  • Check two-stroke oil tank / carry premix oil
    Pre-ride / on the road
    Guideline

    Running a two-stroke out of oil seizes it. Injection bikes: check the tank. Premix: carry oil and a measure.

On the road: every 300 mi

3 items
  • Check lights, horn, brake light switches
    Pre-ride / on the road
    Guideline
  • Check tire pressures
    Pre-ride / on the road
    Guideline
  • Lubricate drive chain
    Pre-ride / on the road
    Guideline

    Lube warm, ideally at the end of the riding day so it soaks in overnight. Sooner after rain.

On the road: every 500 mi

1 item
  • Check coolant level
    Pre-ride / on the road
    Guideline

On the road: every 600 mi

1 item
  • Check chain slack and rear wheel alignment
    Pre-ride / on the road
    Guideline

Every 1,000 mi or 6 months

1 item
  • Inspect tire tread, sidewalls and date codes
    Wheels and tires
    Guideline

Every 2,000 mi or 12 months

1 item
  • Replace spark plugs (two-stroke)
    Engine
    Guideline

Every 3,000 mi or 12 months

11 items
  • Check throttle cable(s) free play and return
    Fuel and air
    Guideline
  • Clean fuel tap filter / sediment bowl
    Fuel and air
    Guideline
  • Clean drive chain thoroughly (remove and soak, re-lube)
    Final drive
    Guideline

    Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.

  • Inspect chain and sprockets for wear (measure stretch)
    Final drive
    Guideline
  • Check steering head bearing adjustment
    Front end
    Guideline
  • Inspect fork seals, stanchions and fork boots
    Front end
    Guideline
  • Check footrests, pegs, rear brake and gear lever pivots
    Rear suspension and frame
    Guideline
  • Grease and check center / side stand and springs
    Rear suspension and frame
    Guideline
  • Check brake pads and discs
    Brakes
    Guideline
  • Check spoke tension and wheel true
    Wheels and tires
    Guideline
  • Check wheel bearings for play
    Wheels and tires
    Guideline

Every 3,000 mi or 2 years

1 item
  • Decarbonize exhaust ports, pipes and baffles
    Engine
    Guideline

    Two-strokes coke up the exhaust port and muffler baffles; power falls off gradually.

Every 4,000 mi or 12 months

2 items
  • Inspect, clean and gap spark plugs
    Engine
    Guideline
  • Adjust clutch free play, lubricate cable and lever pivot
    Primary and gearbox
    Guideline

Every 6,000 mi or 12 months

8 items
  • Inspect coolant hoses and clamps
    Engine
    Guideline
  • Clean / inspect air filter
    Fuel and air
    Guideline

    Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.

  • Clean carburetor float bowl(s), check float level and jets
    Fuel and air
    Guideline

    Ethanol fuel varnishes old carbs quickly in storage.

  • Check charging voltage and regulator / cut-out
    Ignition and electrics
    Guideline
  • Check swingarm bushes for play
    Rear suspension and frame
    Guideline
  • Inspect rear shocks for leaks and damping
    Rear suspension and frame
    Guideline
  • Lubricate control cables and lever pivots
    Controls and cables
    Guideline
  • Lubricate speedometer / tachometer cables, check drive
    Controls and cables
    Guideline

    A dry speedo cable whips the needle and eventually kills the instrument.

Every 10,000 mi or 2 years

2 items
  • Compression test (or leak-down)
    Engine
    Guideline
  • Change gearbox oil
    Primary and gearbox
    Guideline

Every 12,000 mi or 2 years

3 items
  • Replace air filter element
    Fuel and air
    Guideline
  • Clean and grease rear suspension linkage
    Rear suspension and frame
    Guideline
  • Grease swingarm pivot
    Rear suspension and frame
    Guideline

Every 15,000 mi or 3 years

1 item
  • Change fork oil
    Front end
    Guideline

    Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 16,000 mi or 4 years

1 item
  • Replace spark plugs
    Engine
    Guideline

Every 18,000 mi

1 item
  • Replace chain and sprockets (wear based)
    Final drive
    Guideline

Every 20,000 mi or 4 years

2 items
  • Repack / replace steering head bearings
    Front end
    Guideline

    Many old machines use loose balls in cups and cones. Taper roller conversions are common.

  • Repack / replace wheel bearings
    Wheels and tires
    Guideline

    Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 25,000 mi or 6 years

1 item
  • Replace swingarm bushes / bearings
    Rear suspension and frame
    Guideline

Every 30,000 mi or 6 years

1 item
  • Rebuild forks: seals, bushes, springs
    Front end
    Guideline

Every 20 h

27 items
  • Antifreeze and coolant level (check)
    Engine
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

  • Electrical equipment (check function)
    Engine
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

  • Final check and test ride
    Engine
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

  • Gear oil (change)
    Engine
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

  • Headlight setting (check)
    Engine
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

  • Hoses and sleeves (check for cracking, leaks and routing)
    Engine
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

  • Idle (check)
    Engine
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

  • Intake diaphragm (check)
    Engine
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

  • Main muffler glass fiber yarn filling (change)
    Engine
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

  • Moving parts (grease and check for smooth operation)
    Engine
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

  • Screws and nuts (check for tightness)
    Engine
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

  • Spark plug and spark plug connector (change)
    Engine
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

  • Air filter and air filter box (clean)
    Fuel and air
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

  • Hydraulic clutch fluid level (check and correct)
    Primary and gearbox
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

  • Chain tension (check)
    Final drive
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

  • Chain, sprockets and chain guide (check)
    Final drive
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

  • Steering head bearing play (check)
    Front end
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

  • Frame and swingarm (check)
    Rear suspension and frame
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

  • Shock absorber heim joints (check)
    Rear suspension and frame
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

  • Brake discs (check)
    Brakes
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

  • Brake fluid levels front and rear (check)
    Brakes
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

  • Brake lines (check for damage and leakage)
    Brakes
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

  • Brake linings front and rear (check)
    Brakes
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

  • Foot and hand brake lever free travel (check)
    Brakes
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

  • Tire condition and air pressure (check)
    Wheels and tires
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

  • Wheel bearing play, wheel hubs, rim run-out and spoke tension (check)
    Wheels and tires
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

  • Cables and throttle cables (check damage, routing and adjustment)
    Controls and cables
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 20 operating hours.

Every 40 h

5 items
  • Piston (change) and cylinder (check)
    Engine
    Factory

    Factory: Service work as additional order 10.2 (printed p.47; columns once after 10 operating hours, every 40 operating hours, every 80 operating hours (every 40 when used for motorsports), annually): All 125 models: every 40 and 80 operating hours as marked.

  • Clutch (check)
    Primary and gearbox
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 40 operating hours or after every race.

  • Shock absorber service
    Rear suspension and frame
    Factory

    Factory: Service work as additional order 10.2 (printed p.47; columns once after 10 operating hours, every 40 operating hours, every 80 operating hours (every 40 when used for motorsports), annually): every 40 and 80 operating hours as marked.

  • Swingarm bearing (check)
    Rear suspension and frame
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 40 operating hours or after every race.

  • Exhaust control (check function and smooth operation)
    Controls and cables
    Factory

    Factory: Service schedule 10.1 (2014 owner's manual printed p.46; columns every 20 operating hours, every 40 operating hours or after every race): every 40 operating hours or after every race.

Every 80 h or 12 months

1 item
  • Carburetor components (check and set)
    Fuel and air
    Factory

    Factory: Service work as additional order 10.2 (printed p.47; columns once after 10 operating hours, every 40 operating hours, every 80 operating hours (every 40 when used for motorsports), annually): every 80 operating hours (40 for motorsports) and annually.

Every 80 h

4 items
  • Connecting rod, conrod bearing and crank pin (change)
    Engine
    Factory

    Factory: Service work as additional order 10.2 (printed p.47; columns once after 10 operating hours, every 40 operating hours, every 80 operating hours (every 40 when used for motorsports), annually): every 80 operating hours (40 for motorsports).

  • Engine bearings (change all)
    Engine
    Factory

    Factory: Service work as additional order 10.2 (printed p.47; columns once after 10 operating hours, every 40 operating hours, every 80 operating hours (every 40 when used for motorsports), annually): every 80 operating hours (40 for motorsports).

  • Transmission and shift mechanism (check)
    Primary and gearbox
    Factory

    Factory: Service work as additional order 10.2 (printed p.47; columns once after 10 operating hours, every 40 operating hours, every 80 operating hours (every 40 when used for motorsports), annually): every 80 operating hours (40 for motorsports).

  • Fork service
    Front end
    Factory

    Factory: Service work as additional order 10.2 (printed p.47; columns once after 10 operating hours, every 40 operating hours, every 80 operating hours (every 40 when used for motorsports), annually): once after 10 operating hours, then every 40 and every 80 operating hours as marked.

Every 6 months

1 item
  • Clean battery terminals, check charge and strap
    Ignition and electrics
    Guideline

Every 12 months

3 items
  • Hydraulic clutch fluid (change)
    Primary and gearbox
    Factory

    Factory: Service work as additional order 10.2 (printed p.47; columns once after 10 operating hours, every 40 operating hours, every 80 operating hours (every 40 when used for motorsports), annually): annually.

  • Steering head bearing (grease)
    Front end
    Factory

    Factory: Service work as additional order 10.2 (printed p.47; columns once after 10 operating hours, every 40 operating hours, every 80 operating hours (every 40 when used for motorsports), annually): annually.

  • Front and rear brake fluid (change)
    Brakes
    Factory

    Factory: Service work as additional order 10.2 (printed p.47; columns once after 10 operating hours, every 40 operating hours, every 80 operating hours (every 40 when used for motorsports), annually): annually.

Every 2 years

4 items
  • Replace coolant
    Engine
    Guideline
  • Inspect wiring, bullet connectors and ground points
    Ignition and electrics
    Guideline
  • Inspect frame, welds and lugs for cracks
    Rear suspension and frame
    Guideline
  • Replace brake fluid
    Brakes
    Guideline

Every 4 years

3 items
  • Replace fuel lines
    Fuel and air
    Guideline

    Old rubber and modern ethanol fuel do not mix well.

  • Inspect brake hoses; replace old rubber
    Brakes
    Guideline
  • Rebuild calipers and master cylinders (seals)
    Brakes
    Guideline

Every 6 years

2 items
  • Replace inner tubes and rim tape with tires
    Wheels and tires
    Guideline
  • Replace tires on age (regardless of tread)
    Wheels and tires
    Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.

Keep up with this schedule on your phone

Add the bike in the app and this chart loads itself, ready to log against and edit.

Coming soon to Google Play

Other 2010 KTM models

All 2010 KTM