No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

KTM · Shim-adjusted overhead-cam four-stroke twin, dry sump, gearbox shares engine oil, chain drive

RC 8C (889 cc)

Library entry covers 2022-2024

47 factory 50 guideline

Published source

KTM RC 8C 2023 Owner's Manual, service schedule pp.35-36 (ManualsLib)

Factory owner's handbook. Covers KTM RC 8C owner's manual 2023 (cover prints 2023 RC 8C, art. no. 3214768en); the 2023 edition, filed for the RC 8C.

97 items for a 2023 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Dry sump (separate oil tank)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, shim adjusted (incl. desmo)
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Liquid cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Shares engine oil
Clutch control: Hand lever, cable
Final drive: Chain
Front suspension: Telescopic fork
Rear suspension: Swingarm, single shock / cantilever
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

2023 KTM RC 8C (889 cc)

On the road: every 300 km

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

3 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline
Lubricate drive chain

Pre-ride / on the road

Guideline

Lube warm, ideally at the end of the riding day so it soaks in overnight. Sooner after rain.

On the road: every 800 km

1 item

Check coolant level

Pre-ride / on the road

Guideline

On the road: every 1,000 km

1 item

Check chain slack and rear wheel alignment

Pre-ride / on the road

Guideline

Every 1,600 km or 6 months

1 item

Inspect tire tread, sidewalls and date codes

Wheels and tires

Guideline

Every 5,000 km or 12 months

9 items

Check throttle cable(s) free play and return

Fuel and air

Guideline
Clean drive chain thoroughly (remove and soak, re-lube)

Final drive

Guideline

Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.
Inspect chain and sprockets for wear (measure stretch)

Final drive

Guideline
Check steering head bearing adjustment

Front end

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline
Check brake pads and discs

Brakes

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 6,500 km or 12 months

2 items

Inspect, clean and gap spark plugs

Engine

Guideline
Adjust clutch free play, lubricate cable and lever pivot

Primary and gearbox

Guideline

Every 8,000 km or 12 months

2 items

Change engine oil

Engine

Guideline

Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.
Replace oil filter

Engine

Guideline

Every 9,500 km or 12 months

7 items

Inspect coolant hoses and clamps

Engine

Guideline
Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 16,000 km or 2 years

1 item

Compression test (or leak-down)

Engine

Guideline

Every 19,500 km or 2 years

4 items

Replace air filter element

Fuel and air

Guideline
Synchronize throttle bodies

Fuel and air

Guideline
Clean and grease rear suspension linkage

Rear suspension and frame

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 24,000 km or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 24,000 km or 4 years

1 item

Check valve clearances (shim adjusted)

Engine

Guideline

Every 25,500 km or 4 years

1 item

Replace spark plugs

Engine

Guideline

Every 29,000 km

1 item

Replace chain and sprockets (wear based)

Final drive

Guideline

Every 32,000 km or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 38,500 km or 4 years

1 item

Replace fuel filter

Fuel and air

Guideline

Every 40,000 km or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 48,500 km or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 5 h or 12 months

18 items

All hoses and sleeves, cracking, tightness and routing (check)

Engine

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 10 operating hours; every 15 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day; every 12 months.
All moving parts (grease and check for smooth operation)

Engine

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 10 operating hours; every 15 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day; every 12 months.
Engine oil and oil filter (change), oil screens (clean)

Engine

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 10 operating hours; every 15 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day; every 12 months.
Fault memory (read out with KTM diagnostics tool)

Engine

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 10 operating hours; every 15 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day; every 12 months.
Fault memory after test ride (read out)

Engine

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 10 operating hours; every 15 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day; every 12 months.
Final check and test ride

Engine

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 10 operating hours; every 15 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day; every 12 months.
Safety-relevant screws and nuts (check tightness)

Engine

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 10 operating hours; every 15 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day; every 12 months.
Clutch lever free travel (check)

Primary and gearbox

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 10 operating hours; every 15 operating hours; every 30 operating hours; every 60 operating hours; every 12 months.
Chain tension (check)

Final drive

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 10 operating hours; every 15 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day; every 12 months.
Chain, rear sprocket and engine sprocket (check)

Final drive

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 10 operating hours; every 15 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day; every 12 months.
Steering head bearing play (check)

Front end

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 10 operating hours; every 15 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day; every 12 months.
Brake discs (check)

Brakes

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 10 operating hours; every 15 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day; every 12 months.
Brake lines, damage and tightness (check)

Brakes

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 10 operating hours; every 15 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day; every 12 months.
Brake pressure at front and rear levers (check)

Brakes

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 10 operating hours; every 15 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day; every 12 months.
Front brake linings, securing (check)

Brakes

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 10 operating hours; every 15 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day; every 12 months.
Rear brake linings, securing (check)

Brakes

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 10 operating hours; every 15 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day; every 12 months.
Tire condition (check)

Wheels and tires

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 10 operating hours; every 15 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day; every 12 months.
Tire pressure (check)

Wheels and tires

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 10 operating hours; every 15 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day; every 12 months.

Every 5 h

9 items

Coolant level (check)

Engine

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 10 operating hours; every 15 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day.
Coolant overflow reservoir (check)

Engine

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 10 operating hours; every 15 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day.
Air filter box (clean)

Fuel and air

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 10 operating hours; every 15 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day.
Fuel collecting container (check)

Fuel and air

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 10 operating hours; every 15 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day.
Link fork (check)

Front end

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 10 operating hours; every 15 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day.
Frame (check)

Rear suspension and frame

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 10 operating hours; every 15 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day.
Front brake fluid level (check)

Brakes

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 15 operating hours.
Rear brake fluid level (check)

Brakes

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 15 operating hours.
Wheel bearing play (check)

Wheels and tires

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 5 operating hours; every 10 operating hours; every 15 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day.

Every 10 h or 12 months

5 items

Shift shaft sensor (program)

Engine

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 10 operating hours; every 30 operating hours; every 60 operating hours; every 12 months.
Front brake fluid (change)

Brakes

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 10 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day; every 12 months.
Rear brake fluid (change)

Brakes

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 10 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day; every 12 months.
Cables, damage and routing (check)

Controls and cables

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 10 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day; every 12 months.
Throttle cables, damage, routing and setting (check)

Controls and cables

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 10 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day; every 12 months.

Every 10 h

4 items

Heim joint play (check)

Engine

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 10 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day.
Clutch (check)

Primary and gearbox

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 10 operating hours; every 30 operating hours; every 60 operating hours.
Fork bearing play (check)

Front end

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 10 operating hours; every 30 operating hours; every 60 operating hours.
Shock absorber linkage (check)

Rear suspension and frame

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 10 operating hours; every 30 operating hours; every 60 operating hours; after every race or track day.

Every 15 h

4 items

Main muffler glass fiber yarn filling (change)

Engine

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 15 operating hours; every 30 operating hours; every 60 operating hours.
Valve clearance (check)

Engine

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 15 operating hours; every 30 operating hours; every 60 operating hours.
Air filter (clean, change as necessary)

Fuel and air

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 15 operating hours; every 30 operating hours; every 60 operating hours.
Fork leg dust boots (clean)

Front end

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 15 operating hours; every 30 operating hours; every 60 operating hours.

Every 30 h or 12 months

3 items

Fuel pressure (check)

Fuel and air

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 30 operating hours; every 60 operating hours; every 12 months.
Fork (service)

Front end

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 30 operating hours; every 60 operating hours; every 12 months.
Shock absorber (service)

Rear suspension and frame

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 30 operating hours; every 60 operating hours; every 12 months.

Every 30 h

3 items

Water pump cover seal and radial shaft seal rings (change)

Engine

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 30 operating hours; every 60 operating hours.
Fuel filter (change)

Fuel and air

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 30 operating hours; every 60 operating hours.
Minor engine service (spark plugs, piston, cylinder, cylinder head, conrod and crank bearings, balancer bearing, head gasket, camshaft, timing, clutch facings)

Primary and gearbox

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 30 operating hours; every 60 operating hours.

Every 60 h

1 item

Major engine service (valves and springs, cam levers, connecting rod and bearings, crankshaft bearings, spark plugs, clutch linings, piston, transmission and shift check, head gasket, transmission bearings, oil pressure valve, oil pumps, timing chain and guides)

Final drive

Factory

Factory: Service schedule 11.2, service work (printed pp.35-36, viewer pp.37-38); periodic intervals marked: every 60 operating hours.

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

4 items

Replace coolant

Engine

Guideline
Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Replace brake fluid

Brakes

Guideline

Every 4 years

3 items

Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.