No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

Kymco · Two-stroke single, oil injection, CVT belt drive

Super 9 (49 cc)

Library entry covers 2005-2008

51 factory 59 guideline

Published source

Kymco Super 9 50 service manual, inspection and maintenance schedule printed pp.3-1 to 3-4 (ManualsLib 1216084 pp.47-49)

Factory service manual. Covers Kymco Super 9 50 service manual (SF10DA / SH10DA); no edition year seen.

110 items for a 2008 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Two-stroke
Engine lubrication: Two-stroke oil injection (Autolube, Injectolube, Pilgrim pump...)
Oil filtration: None (no filter)
Valve gear: None (two-stroke porting)
Ignition: Magneto (incl. magdyno, flywheel magneto)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Single carburetor
Cooling: Liquid cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Separate gearbox oil
Clutch control: Automatic or semi-automatic
Final drive: Belt CVT, scooter automatic
Front suspension: Telescopic fork
Rear suspension: Swingarm, twin shocks
Front brake: Disc, hydraulic
Rear brake: Drum (or band / belt rim)
Wheels: Spoked, tubed
Sidecar: No sidecar

Maintenance schedule

2008 Kymco Super 9 (49 cc)

On the road: every 200 km

1 item

Check two-stroke oil tank / carry premix oil

Pre-ride / on the road

Guideline

Running a two-stroke out of oil seizes it. Injection bikes: check the tank. Premix: carry oil and a measure.

On the road: every 500 km

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

On the road: every 800 km

1 item

Check coolant level

Pre-ride / on the road

Guideline

Every 1,600 km or 6 months

2 items

Adjust rear drum brake and rod / cable linkage

Brakes

Guideline
Inspect tire tread, sidewalls and date codes

Wheels and tires

Guideline

Every 3,000 km or 12 months

1 item

Replace spark plugs (two-stroke)

Engine

Guideline

Every 5,000 km or 12 months

12 items

Check throttle cable(s) free play and return

Fuel and air

Guideline
Clean fuel tap filter / sediment bowl

Fuel and air

Guideline
Check / set ignition timing

Ignition and electrics

Guideline
Clean and gap contact breaker points, oil cam felt

Ignition and electrics

Guideline
Adjust automatic / semi-automatic clutch

Primary and gearbox

Guideline
Check steering head bearing adjustment

Front end

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline
Check brake pads and discs

Brakes

Guideline
Check spoke tension and wheel true

Wheels and tires

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 5,000 km or 2 years

1 item

Decarbonize exhaust ports, pipes and baffles

Engine

Guideline

Two-strokes coke up the exhaust port and muffler baffles; power falls off gradually.

Every 6,500 km or 12 months

4 items

Check / bleed / adjust oil injection pump cable

Engine

Guideline
Inspect, clean and gap spark plugs

Engine

Guideline
Inspect CVT drive belt, rollers / sliders and clutch shoes

Final drive

Guideline

Typical scooter interval. Your owner's manual figure governs; check belt width against the service limit.
Lubricate brake cam spindles, check linings and drums

Brakes

Guideline

Every 9,500 km or 12 months

8 items

Inspect coolant hoses and clamps

Engine

Guideline
Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Clean carburetor float bowl(s), check float level and jets

Fuel and air

Guideline

Ethanol fuel varnishes old carbs quickly in storage.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 9,500 km or 2 years

2 items

Lubricate and check automatic advance unit

Ignition and electrics

Guideline
Magneto: clean slip ring and pickup brush, check HT lead

Ignition and electrics

Guideline

Every 16,000 km or 2 years

2 items

Compression test (or leak-down)

Engine

Guideline
Change gearbox oil

Primary and gearbox

Guideline

Every 19,500 km or 2 years

2 items

Replace air filter element

Fuel and air

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 19,500 km or 3 years

2 items

Replace points and condenser

Ignition and electrics

Guideline
Replace CVT drive belt

Final drive

Guideline

Typical scooter interval, or sooner if the belt is cracked, glazed or below its width limit.

Every 24,000 km or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 24,000 km

1 item

Replace brake linings / skim drums (wear based)

Brakes

Guideline

Every 25,500 km or 4 years

1 item

Replace spark plugs

Engine

Guideline

Every 32,000 km or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 40,000 km or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 40,000 km or 10 years

1 item

Magneto overhaul / re-magnetize, replace capacitor

Ignition and electrics

Guideline

Weak spark when hot is the classic symptom. Old capacitors fail with age, not miles.

Every 48,500 km or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 6 months

21 items

Axle nut looseness (check)

Engine

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 6 months and every 12 months. Front 49.0-68.6 N-m, rear 107.8-127.4 N-m.
Engine conditions at low and high speeds (check)

Engine

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. 1st month, every 6 months and every 12 months.
Engine performance and abnormal noise (check)

Engine

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 6 months and every 12 months.
Exhaust smoke (check)

Engine

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 6 months and every 12 months.
Lubrication oil leakage (check)

Engine

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 6 months and every 12 months.
Lubrication oil quality and quantity (check)

Engine

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 6 months and every 12 months. Oil level indicator lights when oil is insufficient.
Spark plug condition (check)

Engine

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 6 months and every 12 months. Plug gap 0.6-0.7 mm.
Air cleaner (check)

Fuel and air

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 6 months and every 12 months.
Clean battery terminals, check charge and strap

Ignition and electrics

Guideline
Lubrication points

Ignition and electrics

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 6 months and every 12 months.
Clutch operation (check)

Primary and gearbox

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. 1st month, every 6 months and every 12 months.
Transmission case oil leakage and oil level (check)

Primary and gearbox

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 6 months and every 12 months. Oil level at lower edge of check bolt hole.
Front fork damage (check)

Front end

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 6 months and every 12 months.
Front fork pivot installation (check)

Front end

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 6 months and every 12 months. Check steering stem.
Brake disk-to-lining clearance (check)

Brakes

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 6 months and every 12 months.
Brake performance (check)

Brakes

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. 1st month, every 6 months and every 12 months.
Front/rear brake lever free play (check)

Brakes

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 6 months and every 12 months. Free play 10-20 mm.
Tire cracks and damage (check)

Wheels and tires

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Preride, every 6 months and every 12 months.
Tire embedded objects and gravel (check)

Wheels and tires

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Preride, every 6 months and every 12 months.
Tire groove depth and abnormal wear (check)

Wheels and tires

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Preride, every 6 months and every 12 months. Groove depth limit 0.8 mm front and rear.
Tire pressure (check)

Wheels and tires

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Preride, every 6 months and every 12 months. 1 rider: front 1.75, rear 2.25 kg/cm2.

Every 12 months

23 items

Exhaust muffler joint looseness and damage (check)

Engine

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 12 months.
Exhaust muffler performance (check)

Engine

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 12 months.
Meter (counter) operation (check)

Engine

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 12 months.
Oil filter clogging (check)

Engine

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 12 months.
Suspension arm connecting parts and damage (check)

Engine

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 12 months.
Wiring connections and damage (check)

Engine

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 12 months.
Carbon deposits in combustion chamber, breather hole and exhaust muffler (remove)

Fuel and air

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 12 months.
Carburetor, throttle valve and auto bystarter (check)

Fuel and air

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 12 months.
Fuel filter clogging (check)

Fuel and air

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 12 months.
Battery terminal connection (check)

Ignition and electrics

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 12 months.
Buzzer and steering lock operation (check)

Front end

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 12 months.
Front fork pivot looseness and abnormal noise (check)

Front end

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 12 months. Check steering stem.
Steering handlebar looseness and vertical play (check)

Front end

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 12 months.
Steering handlebar operating performance (check)

Front end

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Preride and every 12 months.
Steering right/left turning angle (check)

Front end

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 12 months.
Body and frame looseness and damage (check)

Rear suspension and frame

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 12 months.
Shock absorber assembly looseness and abnormal noise (check)

Rear suspension and frame

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 12 months.
Shock absorber oil leakage and damage (check)

Rear suspension and frame

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 12 months.
Brake disk (shoe) and lining wear (regular replacement mark)

Brakes

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Star (regular replacement) every 12 months, as printed.
Brake drum wear and damage (check)

Brakes

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 12 months. Rear drum standard 110 mm, service limit 111 mm.
Brake lever/cable looseness, noise and damage (check)

Brakes

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. 1st month and every 12 months.
Wheel bearings excessive play and abnormal noise (check)

Wheels and tires

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Every 12 months.
Wheel rim, rim edge and spoke plate damage (check)

Wheels and tires

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. 1st month and every 12 months. Runout limit 2.0 mm axial and radial.

Every 2 years

4 items

Replace coolant

Engine

Guideline
Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Replace brake fluid

Brakes

Guideline

Every 4 years

5 items

Replace oil injection delivery lines

Engine

Guideline
Fuel tube (replace)

Fuel and air

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Star: every 4 years.
Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

2 items

Replace inner tubes and rim tape with tires

Wheels and tires

Guideline
Replace tires on age (regardless of tread)

Wheels and tires

Guideline

No interval set

7 items

Oil level (check)

Engine

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Preride check.
Rearview mirror position (check)

Engine

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Preride check.
Recurrence of earlier abnormal conditions (check)

Engine

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Preride check.
Reflector and license plate dirt and damage (check)

Engine

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Preride check.
Winker action, dirt and damage (check)

Engine

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Preride check.
Fuel level (check)

Fuel and air

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Preride check.
Brake lever operation (check)

Brakes

Factory

Factory: Inspection and maintenance schedule (Kymco Super 9 50 service manual, printed pp.3-1 to 3-4; frequency columns preride, 1st month, every 6 months, every 12 months; based on average riding conditions, more often in severe use or unusually dusty areas). Note 1: circle = time for inspection; note 2: star = regular replacement of the part. Preride check.

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.