No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

Lambretta · Overhead-cam four-stroke single, wet sump, separate gearbox oil, CVT belt drive

Uno 150

Library entry covers 2008-2017

18 factory 45 guideline

Published source

Lambretta Uno Owner's Manual, Periodic Checks and Services for UNO 150cc 4 Stroke, p.86 (ManualsLib)

Factory source. Covers Lambretta Uno owner's manual (ManualsLib title 'Uno50'), table headed 'UNO 150cc 4 Stroke'; no year printed on the page read.

63 items for a 2015 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, screw/locknut adjusters
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Single carburetor
Cooling: Air / oil cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Separate gearbox oil
Clutch control: Automatic or semi-automatic
Final drive: Belt CVT, scooter automatic
Front suspension: Telescopic fork
Rear suspension: Swingarm, single shock / cantilever
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

2015 Lambretta Uno 150

On the road: every 300 km

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

Every 1,000 km

3 items

Battery (inspect)

Ignition and electrics

Factory

Factory: Periodic Checks and Services for UNO 150cc 4 Stroke (owner manual p.86): from 1000 km, every 1000 km. Columns as printed: 300, 1000, 2000 ... 10000 km, then "continue every" the listed distance; follow intervals after the last listed service. Key: R replace, A adjust, C clean, T tighten, I inspect and clean.
Brake system (inspect)

Brakes

Factory

Factory: Periodic Checks and Services for UNO 150cc 4 Stroke (owner manual p.86): at 300 km and 1000 km, then every 1000 km. Columns as printed: 300, 1000, 2000 ... 10000 km, then "continue every" the listed distance; follow intervals after the last listed service. Key: R replace, A adjust, C clean, T tighten, I inspect and clean.
Tires (inspect)

Wheels and tires

Factory

Factory: Periodic Checks and Services for UNO 150cc 4 Stroke (owner manual p.86): at 300 km and 1000 km, then every 1000 km. Columns as printed: 300, 1000, 2000 ... 10000 km, then "continue every" the listed distance; follow intervals after the last listed service. Key: R replace, A adjust, C clean, T tighten, I inspect and clean.

Every 1,600 km or 6 months

1 item

Inspect tire tread, sidewalls and date codes

Wheels and tires

Guideline

Every 2,000 km

3 items

Engine oil (replace)

Engine

Factory

Factory: Periodic Checks and Services for UNO 150cc 4 Stroke (owner manual p.86): at 300 km and 2000 km, then every 2000 km. Columns as printed: 300, 1000, 2000 ... 10000 km, then "continue every" the listed distance; follow intervals after the last listed service. Key: R replace, A adjust, C clean, T tighten, I inspect and clean.
Oil screen filter (clean)

Engine

Factory

Factory: Periodic Checks and Services for UNO 150cc 4 Stroke (owner manual p.86): at 300 km and 2000 km, then every 2000 km. Columns as printed: 300, 1000, 2000 ... 10000 km, then "continue every" the listed distance; follow intervals after the last listed service. Key: R replace, A adjust, C clean, T tighten, I inspect and clean.
Spark plug (clean)

Engine

Factory

Factory: Periodic Checks and Services for UNO 150cc 4 Stroke (owner manual p.86): every 2000 km or as needed. Columns as printed: 300, 1000, 2000 ... 10000 km, then "continue every" the listed distance; follow intervals after the last listed service. Key: R replace, A adjust, C clean, T tighten, I inspect and clean.

Every 3,000 km

1 item

Evaporative emission system tubes (inspect)

Engine

Factory

Factory: Periodic Checks and Services for UNO 150cc 4 Stroke (owner manual p.86): inspect all tubes every 3000 km; replace if cracked, chafed or damaged. Columns as printed: 300, 1000, 2000 ... 10000 km, then "continue every" the listed distance; follow intervals after the last listed service. Key: R replace, A adjust, C clean, T tighten, I inspect and clean.

Every 4,000 km

3 items

Valve gap (adjust)

Engine

Factory

Factory: Periodic Checks and Services for UNO 150cc 4 Stroke (owner manual p.86): at 1000 km and 4000 km, then every 4000 km. Columns as printed: 300, 1000, 2000 ... 10000 km, then "continue every" the listed distance; follow intervals after the last listed service. Key: R replace, A adjust, C clean, T tighten, I inspect and clean.
Carburetor (inspect and clean)

Fuel and air

Factory

Factory: Periodic Checks and Services for UNO 150cc 4 Stroke (owner manual p.86): at 4000 km, then every 4000 km. Columns as printed: 300, 1000, 2000 ... 10000 km, then "continue every" the listed distance; follow intervals after the last listed service. Key: R replace, A adjust, C clean, T tighten, I inspect and clean.
Cam chain (inspect)

Final drive

Factory

Factory: Periodic Checks and Services for UNO 150cc 4 Stroke (owner manual p.86): at 1000 km and 4000 km, then every 4000 km. Columns as printed: 300, 1000, 2000 ... 10000 km, then "continue every" the listed distance; follow intervals after the last listed service. Key: R replace, A adjust, C clean, T tighten, I inspect and clean.

Every 5,000 km or 12 months

9 items

Check throttle cable(s) free play and return

Fuel and air

Guideline
Clean fuel tap filter / sediment bowl

Fuel and air

Guideline
Adjust automatic / semi-automatic clutch

Primary and gearbox

Guideline
Check steering head bearing adjustment

Front end

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline
Check brake pads and discs

Brakes

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 5,000 km

8 items

Drive belt (check)

Engine

Factory

Factory: Periodic Checks and Services for UNO 150cc 4 Stroke (owner manual p.86): check every 5000 km; replace if worn, cracked or glazed. Columns as printed: 300, 1000, 2000 ... 10000 km, then "continue every" the listed distance; follow intervals after the last listed service. Key: R replace, A adjust, C clean, T tighten, I inspect and clean.
Gear oil (replace)

Engine

Factory

Factory: Periodic Checks and Services for UNO 150cc 4 Stroke (owner manual p.86): at 300 km and 5000 km, then every 5000 km. Columns as printed: 300, 1000, 2000 ... 10000 km, then "continue every" the listed distance; follow intervals after the last listed service. Key: R replace, A adjust, C clean, T tighten, I inspect and clean.
Muffler/catalyst (inspect)

Engine

Factory

Factory: Periodic Checks and Services for UNO 150cc 4 Stroke (owner manual p.86): at 2000 km and 5000 km, then every 5000 km. Columns as printed: 300, 1000, 2000 ... 10000 km, then "continue every" the listed distance; follow intervals after the last listed service. Key: R replace, A adjust, C clean, T tighten, I inspect and clean.
Nuts and bolts (tighten)

Engine

Factory

Factory: Periodic Checks and Services for UNO 150cc 4 Stroke (owner manual p.86): at 300 km and 5000 km, then every 5000 km. Columns as printed: 300, 1000, 2000 ... 10000 km, then "continue every" the listed distance; follow intervals after the last listed service. Key: R replace, A adjust, C clean, T tighten, I inspect and clean.
Air cleaner (change filter)

Fuel and air

Factory

Factory: Periodic Checks and Services for UNO 150cc 4 Stroke (owner manual p.86): every 5000 km or as needed. Columns as printed: 300, 1000, 2000 ... 10000 km, then "continue every" the listed distance; follow intervals after the last listed service. Key: R replace, A adjust, C clean, T tighten, I inspect and clean.
Fuel filter (replace)

Fuel and air

Factory

Factory: Periodic Checks and Services for UNO 150cc 4 Stroke (owner manual p.86): at 2000 km and 5000 km, then every 5000 km. Columns as printed: 300, 1000, 2000 ... 10000 km, then "continue every" the listed distance; follow intervals after the last listed service. Key: R replace, A adjust, C clean, T tighten, I inspect and clean.
Fuel line (inspect)

Fuel and air

Factory

Factory: Periodic Checks and Services for UNO 150cc 4 Stroke (owner manual p.86): at 2000 km and 5000 km, then every 5000 km. Columns as printed: 300, 1000, 2000 ... 10000 km, then "continue every" the listed distance; follow intervals after the last listed service. Key: R replace, A adjust, C clean, T tighten, I inspect and clean.
Pulse air filter (replace)

Fuel and air

Factory

Factory: Periodic Checks and Services for UNO 150cc 4 Stroke (owner manual p.86): inspect at 2000 km; replace at 5000 km, then every 5000 km. Columns as printed: 300, 1000, 2000 ... 10000 km, then "continue every" the listed distance; follow intervals after the last listed service. Key: R replace, A adjust, C clean, T tighten, I inspect and clean.

Every 6,500 km or 12 months

2 items

Inspect, clean and gap spark plugs

Engine

Guideline
Inspect CVT drive belt, rollers / sliders and clutch shoes

Final drive

Guideline

Typical scooter interval. Your owner's manual figure governs; check belt width against the service limit.

Every 8,000 km or 12 months

2 items

Change engine oil

Engine

Guideline

Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.
Replace oil filter

Engine

Guideline

Every 9,500 km or 12 months

7 items

Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Clean carburetor float bowl(s), check float level and jets

Fuel and air

Guideline

Ethanol fuel varnishes old carbs quickly in storage.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 13,000 km or 2 years

1 item

Check and adjust valve clearances

Engine

Guideline

Every 16,000 km or 2 years

2 items

Compression test (or leak-down)

Engine

Guideline
Change gearbox oil

Primary and gearbox

Guideline

Every 19,500 km or 2 years

3 items

Replace air filter element

Fuel and air

Guideline
Clean and grease rear suspension linkage

Rear suspension and frame

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 19,500 km or 3 years

1 item

Replace CVT drive belt

Final drive

Guideline

Typical scooter interval, or sooner if the belt is cracked, glazed or below its width limit.

Every 24,000 km or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 25,500 km or 4 years

1 item

Replace spark plugs

Engine

Guideline

Every 32,000 km or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 40,000 km or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 48,500 km or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

3 items

Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Replace brake fluid

Brakes

Guideline

Every 4 years

3 items

Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.

Keep up with this schedule on your phone

Add the bike in the app and this chart loads itself, ready to log against and edit.

Coming soon to Google Play

Other 2015 Lambretta models

All 2015 Lambretta