
750 S Formula
Library entry covers 1998-2001
Published source
Laverda 750 Specifications - Operation - Maintenance, Ed. 07.97, Periodic maintenance p.43 (ManualsLib 1225882)
Factory owner's handbook. Covers Laverda 750 manual, Ed. 07.97 (liquid-cooled 750 twin, half-faired 750 S on the cover); it does not name the S Formula trim.
65 items for a 2001 model, grouped by interval the way a factory chart is laid out.
How this bike is built (what the schedule is based on)
- Engine cycle
- Four-stroke
- Engine lubrication
- Wet sump (oil in crankcase)
- Oil filtration
- Replaceable cartridge or spin-on filter
- Valve gear
- Overhead cam, shim adjusted (incl. desmo)
- Ignition
- Electronic (CDI / transistor / ECU)
- Charging
- Alternator / stator with rectifier
- Battery
- Wet cell (flooded lead-acid, needs topping up)
- Fuel system
- Fuel injection
- Cooling
- Liquid cooled
- Primary drive
- Gear or chain inside engine, shares engine oil
- Gearbox oil
- Shares engine oil
- Clutch control
- Hand lever, cable
- Final drive
- Chain
- Front suspension
- Telescopic fork
- Rear suspension
- Swingarm, single shock / cantilever
- Front brake
- Disc, hydraulic
- Rear brake
- Disc, hydraulic
- Wheels
- Cast / alloy, tubeless
- Sidecar
- No sidecar
2001 Laverda 750 S Formula
On the road: every 300 km
1 item-
Check engine oil levelPre-ride / on the roadGuideline
Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.
On the road: every 500 km
3 items-
Check lights, horn, brake light switchesPre-ride / on the roadGuideline
-
Check tire pressuresPre-ride / on the roadGuideline
-
Lubricate drive chainPre-ride / on the roadGuideline
Lube warm, ideally at the end of the riding day so it soaks in overnight. Sooner after rain.
On the road: every 800 km
1 item-
Check coolant levelPre-ride / on the roadGuideline
On the road: every 1,000 km
1 item-
Check chain slack and rear wheel alignmentPre-ride / on the roadGuideline
Every 1,000 km
3 items-
Engine oil level (check)EngineFactory
Factory: Periodic maintenance chart (p.43): C before delivery and every 1,000 km. Codes: C = check; P = clean; S = change. Columns: before delivery, after the first 1,000 km, then every 1,000, 5,000, 10,000, 20,000 and 30,000 km.
-
Brake and clutch fluid level (check)BrakesFactory
Factory: Periodic maintenance chart (p.43): C before delivery, after the first 1,000 km, then every 1,000 km. Codes: C = check; P = clean; S = change. Columns: before delivery, after the first 1,000 km, then every 1,000, 5,000, 10,000, 20,000 and 30,000 km.
-
Brake and clutch hydraulic controls (check)BrakesFactory
Factory: Periodic maintenance chart (p.43): C before delivery, after the first 1,000 km, then every 1,000 km. Codes: C = check; P = clean; S = change. Columns: before delivery, after the first 1,000 km, then every 1,000, 5,000, 10,000, 20,000 and 30,000 km.
Every 1,600 km or 6 months
1 item-
Inspect tire tread, sidewalls and date codesWheels and tiresGuideline
Every 5,000 km or 12 months
9 items-
Check throttle cable(s) free play and returnFuel and airGuideline
-
Clean drive chain thoroughly (remove and soak, re-lube)Final driveGuideline
Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.
-
Inspect chain and sprockets for wear (measure stretch)Final driveGuideline
-
Check steering head bearing adjustmentFront endGuideline
-
Inspect fork seals, stanchions and fork bootsFront endGuideline
-
Check footrests, pegs, rear brake and gear lever pivotsRear suspension and frameGuideline
-
Grease and check center / side stand and springsRear suspension and frameGuideline
-
Check brake pads and discsBrakesGuideline
-
Check wheel bearings for playWheels and tiresGuideline
Every 5,000 km
3 items-
Engine oil (change)EngineFactory
Factory: Periodic maintenance chart (p.43): S after the first 1,000 km, then every 5,000 km. Codes: C = check; P = clean; S = change. Columns: before delivery, after the first 1,000 km, then every 1,000, 5,000, 10,000, 20,000 and 30,000 km.
-
Engine oil filter (change)EngineFactory
Factory: Periodic maintenance chart (p.43): S after the first 1,000 km, then every 5,000 km. Codes: C = check; P = clean; S = change. Columns: before delivery, after the first 1,000 km, then every 1,000, 5,000, 10,000, 20,000 and 30,000 km.
-
Air filter (change or clean)Fuel and airFactory
Factory: Periodic maintenance chart (p.43): S/P after the first 1,000 km, then marked in the every 5,000, 10,000 and 20,000 km columns. Codes: C = check; P = clean; S = change. Columns: before delivery, after the first 1,000 km, then every 1,000, 5,000, 10,000, 20,000 and 30,000 km.
Every 6,500 km or 12 months
2 items-
Inspect, clean and gap spark plugsEngineGuideline
-
Adjust clutch free play, lubricate cable and lever pivotPrimary and gearboxGuideline
Every 8,000 km or 12 months
2 items-
Change engine oilEngineGuideline
Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.
-
Replace oil filterEngineGuideline
Every 9,500 km or 12 months
7 items-
Inspect coolant hoses and clampsEngineGuideline
-
Clean / inspect air filterFuel and airGuideline
Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
-
Check charging voltage and regulator / cut-outIgnition and electricsGuideline
-
Check swingarm bushes for playRear suspension and frameGuideline
-
Inspect rear shocks for leaks and dampingRear suspension and frameGuideline
-
Lubricate control cables and lever pivotsControls and cablesGuideline
-
Lubricate speedometer / tachometer cables, check driveControls and cablesGuideline
A dry speedo cable whips the needle and eventually kills the instrument.
Every 10,000 km
3 items-
Spark plugs (change or clean)EngineFactory
Factory: Periodic maintenance chart (p.43): S/P after the first 1,000 km, then every 10,000 km. Codes: C = check; P = clean; S = change. Columns: before delivery, after the first 1,000 km, then every 1,000, 5,000, 10,000, 20,000 and 30,000 km.
-
Valve clearance (check)EngineFactory
Factory: Periodic maintenance chart (p.43): C after the first 1,000 km, then every 10,000 km. Codes: C = check; P = clean; S = change. Columns: before delivery, after the first 1,000 km, then every 1,000, 5,000, 10,000, 20,000 and 30,000 km.
-
Timing chain (check)Final driveFactory
Factory: Periodic maintenance chart (p.43): distribution chain, C after the first 1,000 km, then every 10,000 km. Codes: C = check; P = clean; S = change. Columns: before delivery, after the first 1,000 km, then every 1,000, 5,000, 10,000, 20,000 and 30,000 km.
Every 16,000 km or 2 years
1 item-
Compression test (or leak-down)EngineGuideline
Every 19,500 km or 2 years
4 items-
Replace air filter elementFuel and airGuideline
-
Synchronize throttle bodiesFuel and airGuideline
-
Clean and grease rear suspension linkageRear suspension and frameGuideline
-
Grease swingarm pivotRear suspension and frameGuideline
Every 20,000 km
2 items-
Coolant (check)EngineFactory
Factory: Periodic maintenance chart (p.43): C after the first 1,000 km, then every 20,000 km. Codes: C = check; P = clean; S = change. Columns: before delivery, after the first 1,000 km, then every 1,000, 5,000, 10,000, 20,000 and 30,000 km.
-
Timing chain (change)Final driveFactory
Factory: Periodic maintenance chart (p.43): change distribution chain, S every 20,000 km. Codes: C = check; P = clean; S = change. Columns: before delivery, after the first 1,000 km, then every 1,000, 5,000, 10,000, 20,000 and 30,000 km.
Every 24,000 km or 3 years
1 item-
Change fork oilFront endGuideline
Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.
Every 24,000 km or 4 years
1 item-
Check valve clearances (shim adjusted)EngineGuideline
Every 25,500 km or 4 years
1 item-
Replace spark plugsEngineGuideline
Every 29,000 km
1 item-
Replace chain and sprockets (wear based)Final driveGuideline
Every 30,000 km
1 item-
Fuel filter (change)Fuel and airFactory
Factory: Periodic maintenance chart (p.43): S every 30,000 km. Codes: C = check; P = clean; S = change. Columns: before delivery, after the first 1,000 km, then every 1,000, 5,000, 10,000, 20,000 and 30,000 km.
Every 32,000 km or 4 years
2 items-
Repack / replace steering head bearingsFront endGuideline
Many old machines use loose balls in cups and cones. Taper roller conversions are common.
-
Repack / replace wheel bearingsWheels and tiresGuideline
Cup-and-cone and taper roller hubs need periodic repacking and adjustment.
Every 38,500 km or 4 years
1 item-
Replace fuel filterFuel and airGuideline
Every 40,000 km or 6 years
1 item-
Replace swingarm bushes / bearingsRear suspension and frameGuideline
Every 48,500 km or 6 years
1 item-
Rebuild forks: seals, bushes, springsFront endGuideline
Every 6 months
1 item-
Clean battery terminals, check charge and strapIgnition and electricsGuideline
Every 2 years
5 items-
Replace coolantEngineGuideline
-
Inspect wiring, bullet connectors and ground pointsIgnition and electricsGuideline
-
Inspect frame, welds and lugs for cracksRear suspension and frameGuideline
-
Brake and clutch fluid (change)BrakesFactory
Factory: Periodic maintenance chart (p.43): S every 2 years. Codes: C = check; P = clean; S = change. Columns: before delivery, after the first 1,000 km, then every 1,000, 5,000, 10,000, 20,000 and 30,000 km.
-
Replace brake fluidBrakesGuideline
Every 4 years
3 items-
Replace fuel linesFuel and airGuideline
Old rubber and modern ethanol fuel do not mix well.
-
Inspect brake hoses; replace old rubberBrakesGuideline
-
Rebuild calipers and master cylinders (seals)BrakesGuideline
Every 6 years
1 item-
Replace tires on age (regardless of tread)Wheels and tiresGuideline
No interval set
2 items-
Cylinder head torque (check)EngineFactory
Factory: Periodic maintenance chart (p.43): engine head torque wrench setting, C after the first 1,000 km only. Codes: C = check; P = clean; S = change. Columns: before delivery, after the first 1,000 km, then every 1,000, 5,000, 10,000, 20,000 and 30,000 km.
-
Engine and chassis fasteners torque (check)EngineFactory
Factory: Periodic maintenance chart (p.43): motor/chassis torque (tightening torque 45 to 50 Nm), C after the first 1,000 km only. Codes: C = check; P = clean; S = change. Columns: before delivery, after the first 1,000 km, then every 1,000, 5,000, 10,000, 20,000 and 30,000 km.
Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.
Keep up with this schedule on your phone
Add the bike in the app and this chart loads itself, ready to log against and edit.