No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

Moto Guzzi · Moto Guzzi V-twin, injected (2000-)

Breva 850

Library entry covers 2007-2010

40 factory 46 guideline

Published source

Moto Guzzi Breva use and maintenance (Breva V 850 IE - V 1100 IE), 2006 English edition, scheduled maintenance chart printed pp.58-60

Factory owner's handbook. Covers Moto Guzzi Breva V 850 IE / V 1100 IE use and maintenance book, English (file named 2006); the inner spark plug item is marked 1100 only and is left out.

86 items for a 2008 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead valve, pushrods, adjustable tappets
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Air / oil cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Separate gearbox oil
Clutch control: Hand lever, cable
Final drive: Shaft
Front suspension: Telescopic fork
Rear suspension: Swingarm, single shock / cantilever
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

2008 Moto Guzzi Breva 850

On the road: every 300 km

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

Every 1,600 km or 6 months

1 item

Inspect tire tread, sidewalls and date codes

Wheels and tires

Guideline

Every 2,000 km

1 item

Brake pad wear (check)

Brakes

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 1 at end of running-in; before each ride and every 2000 km (1250 mi); change if worn. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.

Every 5,000 km or 12 months

7 items

Check throttle cable(s) free play and return

Fuel and air

Guideline
Check steering head bearing adjustment

Front end

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline
Check brake pads and discs

Brakes

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 5,000 km

1 item

Oil drain tube from air box (drain)

Engine

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 2 every 5000 km (3125 mi). Can also be carried out by the owner. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.

Every 6,500 km or 12 months

2 items

Inspect, clean and gap spark plugs

Engine

Guideline
Adjust clutch free play, lubricate cable and lever pivot

Primary and gearbox

Guideline

Every 8,000 km or 12 months

2 items

Change engine oil

Engine

Guideline

Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.
Replace oil filter

Engine

Guideline

Every 9,500 km or 12 months

7 items

Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check final drive for leaks and bearing play

Final drive

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 10,000 km or 12 months

21 items

Cylinder synchronization (check)

Engine

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 1 at end of running-in and every 10000 km. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Engine oil (change)

Engine

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 3 at end of running-in and every 10000 km. Can also be carried out by the owner. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Engine oil filter (change)

Engine

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 3 at end of running-in and every 10000 km. If used in competitions, change every 5000 km. Can also be carried out by the owner. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Idle mixture (CO) (check)

Engine

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 1 every 10000 km. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Light operation / beam setting (check)

Engine

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 1 every 10000 km. Can also be carried out by the owner. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Lighting system and safety switches (check)

Engine

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 1 at end of running-in and every 10000 km. Can also be carried out by the owner. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Outer spark plugs (change)

Engine

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 3 every 10000 km. If used in competitions, change every 5000 km. Can also be carried out by the owner. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Valve clearance (adjust)

Engine

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 4 at end of running-in and every 10000 km. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Vehicle operation (check)

Engine

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 1 at end of running-in and every 10000 km. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Fuel pipes (check)

Fuel and air

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 1 every 10000 km; change every 4 years. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Clutch wear (check)

Primary and gearbox

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 1 every 10000 km; if used for racing, check every 5000 km. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Steering bearings and steering play (check)

Front end

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 1 at end of running-in and every 10000 km. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Brake discs (check)

Brakes

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 1 at end of running-in and every 10000 km. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Brake fluid (check)

Brakes

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 1 every 10000 km. Can also be carried out by the owner. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Brake lines (check)

Brakes

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 1 every 10000 km; change every 4 years. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Brake systems (check)

Brakes

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 1 at end of running-in and every 10000 km. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Tire pressures (adjust)

Wheels and tires

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 4 at end of running-in and every 10000 km; check every two weeks. Can also be carried out by the owner. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Tires (check)

Wheels and tires

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 1 at end of running-in and every 10000 km. Can also be carried out by the owner. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Wheel bearings (check)

Wheels and tires

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 1 every 10000 km. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Wheels / tires and nut, bolt, screw tightening (check)

Wheels and tires

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 1 at end of running-in and every 10000 km. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Bowden cables and controls (check)

Controls and cables

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 1 at end of running-in and every 10000 km. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.

Every 13,000 km or 2 years

1 item

Check and adjust valve clearances

Engine

Guideline

Every 16,000 km or 2 years

2 items

Compression test (or leak-down)

Engine

Guideline
Change gearbox oil

Primary and gearbox

Guideline

Every 19,500 km or 2 years

5 items

Replace air filter element

Fuel and air

Guideline
Synchronize throttle bodies

Fuel and air

Guideline
Change final drive (rear drive) oil

Final drive

Guideline
Clean and grease rear suspension linkage

Rear suspension and frame

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 20,000 km or 2 years

6 items

Suspensions and trim (check)

Engine

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 1 at end of running-in and every 20000 km. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Air filter (change)

Fuel and air

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 1 every 10000 km; 3 every 20000 km. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Final transmission fluid (change)

Primary and gearbox

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 3 at end of running-in; 4 every 10000 km; 3 every 20000 km. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Gearbox fluid (change)

Primary and gearbox

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 3 at end of running-in; 4 every 10000 km; 3 every 20000 km. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Fork (check)

Front end

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 1 at end of running-in and every 20000 km. Can also be carried out by the owner. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Brake fluid (change)

Brakes

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 3 every 20000 km. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.

Every 20,000 km

3 items

Generator belt (adjust)

Ignition and electrics

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 4 every 20000 km (12500 mi); 3 every 50000 km (31250 mi). Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Fork fluid (change)

Front end

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 3 after the first 10000 km (6250 mi) and then every 20000 km (12500 mi). Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Fork oil seals (change)

Front end

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 3 after the first 30000 km (18750 mi) and then every 20000 km (12500 mi). Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.

Every 24,000 km or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 25,500 km or 4 years

1 item

Replace spark plugs

Engine

Guideline

Every 32,000 km or 4 years

3 items

Lubricate drive shaft splines / check U-joint

Final drive

Guideline
Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 38,500 km or 4 years

1 item

Replace fuel filter

Fuel and air

Guideline

Every 40,000 km or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 48,500 km or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 50,000 km

1 item

Generator belt (change)

Ignition and electrics

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 3 every 50000 km (31250 mi). Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

3 items

Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Replace brake fluid

Brakes

Guideline

Every 4 years

5 items

Fuel pipes (change)

Fuel and air

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 3 every 4 years. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Brake lines (change)

Brakes

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 3 every 4 years. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

No interval set

5 items

Engine oil pressure warning light (check)

Engine

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 1 at every start-up. Can also be carried out by the owner. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Exhaust pipe flange bolts (check)

Engine

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 1 at end of running-in. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Head bolts (tighten)

Engine

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 4 at end of running-in. Can also be carried out by the owner. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Head stud bolts (tighten)

Engine

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 4 at end of running-in. Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.
Battery terminals (tighten)

Ignition and electrics

Factory

Factory: Scheduled maintenance chart (printed pp.58-60), columns end of running-in 1000 km (625 mi), every 10000 km (6250 mi) or 12 months, every 20000 km (12500 mi) or 24 months: 1 at end of running-in (in both the owner and dealer charts). Key: 1 = check and clean, adjust, lubricate or change if necessary; 2 = clean; 3 = change; 4 = adjust. Perform maintenance more frequently (halve intervals) in rainy or dusty conditions, on rough roads or for racing.

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.