MotoService Log
Moto Guzzi Norge GT 8V
Example photo: moto-gundy, CC BY-SA 3.0 de, Wikimedia Commons
Moto Guzzi · Overhead-cam four-stroke twin, wet sump, separate gearbox oil, shaft drive

Norge GT 8V

Library entry covers 2011-2016

43 factory 33 guideline

Published source

Moto Guzzi Norge GT 8v Service Station Manual 897237, Maintenance chart MAIN-59

Factory workshop manual. Covers Norge GT 8v (service station manual 897237).

76 items for a 2012 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)
Engine cycle
Four-stroke
Engine lubrication
Wet sump (oil in crankcase)
Oil filtration
Replaceable cartridge or spin-on filter
Valve gear
Overhead cam, screw/locknut adjusters
Ignition
Electronic (CDI / transistor / ECU)
Charging
Alternator / stator with rectifier
Battery
Wet cell (flooded lead-acid, needs topping up)
Fuel system
Fuel injection
Cooling
Air / oil cooled
Primary drive
Gear or chain inside engine, shares engine oil
Gearbox oil
Separate gearbox oil
Clutch control
Hand lever, cable
Final drive
Shaft
Front suspension
Telescopic fork
Rear suspension
Swingarm, twin shocks
Front brake
Disc, hydraulic
Rear brake
Disc, hydraulic
Wheels
Cast / alloy, tubeless
Sidecar
No sidecar
Maintenance schedule

2012 Moto Guzzi Norge GT 8V

On the road: every 200 mi

1 item
  • Check engine oil level
    Pre-ride / on the road
    Guideline

    Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 300 mi

2 items
  • Check lights, horn, brake light switches
    Pre-ride / on the road
    Guideline
  • Check tire pressures
    Pre-ride / on the road
    Guideline

Every 1,000 mi or 6 months

1 item
  • Inspect tire tread, sidewalls and date codes
    Wheels and tires
    Guideline

Every 3,000 mi or 12 months

7 items
  • Check throttle cable(s) free play and return
    Fuel and air
    Guideline
  • Check steering head bearing adjustment
    Front end
    Guideline
  • Inspect fork seals, stanchions and fork boots
    Front end
    Guideline
  • Check footrests, pegs, rear brake and gear lever pivots
    Rear suspension and frame
    Guideline
  • Grease and check center / side stand and springs
    Rear suspension and frame
    Guideline
  • Check brake pads and discs
    Brakes
    Guideline
  • Check wheel bearings for play
    Wheels and tires
    Guideline

Every 4,000 mi or 12 months

2 items
  • Inspect, clean and gap spark plugs
    Engine
    Guideline
  • Adjust clutch free play, lubricate cable and lever pivot
    Primary and gearbox
    Guideline

Every 6,000 mi or 12 months

7 items
  • Clean / inspect air filter
    Fuel and air
    Guideline

    Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.

  • Check charging voltage and regulator / cut-out
    Ignition and electrics
    Guideline
  • Check final drive for leaks and bearing play
    Final drive
    Guideline
  • Check swingarm bushes for play
    Rear suspension and frame
    Guideline
  • Inspect rear shocks for leaks and damping
    Rear suspension and frame
    Guideline
  • Lubricate control cables and lever pivots
    Controls and cables
    Guideline
  • Lubricate speedometer / tachometer cables, check drive
    Controls and cables
    Guideline

    A dry speedo cable whips the needle and eventually kills the instrument.

Every 6,214 mi

26 items
  • Bolts and nuts tightening
    Engine
    Factory

    Factory: As printed: I at 1.5, 10, 20, 30, 40, 50, 60, 70, 80 (Km x 1000)

  • Braking systems
    Engine
    Factory

    Factory: As printed: I at 1.5, 10, 20, 30, 40, 50, 60, 70, 80 (Km x 1000)

  • Change engine oil
    Engine
    Factory

    Manual: Engine oil. Factory: Columns km x1000 1.5/10/20/.../80; first 1,500 km; 5,000 km if raced

  • Check and adjust valve clearances
    Engine
    Factory

    Manual: Valve clearance adjustment. Factory: First 1,500 km

  • Engine idle speed
    Engine
    Factory

    Factory: As printed: A at 1.5, 10, 20, 30, 40, 50, 60, 70, 80 (Km x 1000)

  • Filter housing oil drainage pipe draining (5)
    Engine
    Factory

    Factory: As printed: C at 10, 20, 30, 40, 50, 60, 70, 80 (Km x 1000); (5) Every 5000 Km if the vehicle is used for racing.

  • Light circuit
    Engine
    Factory

    Factory: As printed: I at 1.5, 10, 20, 30, 40, 50, 60, 70, 80 (Km x 1000)

  • Replace oil filter
    Engine
    Factory

    Manual: Engine oil filter. Factory: First 1,500 km

  • Replace spark plugs
    Engine
    Factory

    Manual: Spark plugs.

  • Vehicle general operation
    Engine
    Factory

    Factory: As printed: I at 1.5, 10, 20, 30, 40, 50, 60, 70, 80 (Km x 1000)

  • Carburetion at idle (CO)
    Fuel and air
    Factory

    Factory: As printed: I at 10, 20, 30, 40, 50, 60, 70, 80 (Km x 1000)

  • Replace fuel lines
    Fuel and air
    Factory

    Manual: Fuel lines. Factory: Replace every 4 years

  • Synchronize throttle bodies
    Fuel and air
    Factory

    Manual: Cylinder synchronization.

  • Change gearbox oil
    Primary and gearbox
    Factory

    Manual: Gearbox oil. Factory: First 1,500 km

  • Clutch lever pin (7)
    Primary and gearbox
    Factory

    Factory: As printed: L at 1.5, 10, 20, 30, 40, 50, 60, 70, 80 (Km x 1000); note (7) is not printed with the chart

  • Clutch wear
    Primary and gearbox
    Factory

    Factory: As printed: I at 10, 20, 30, 40, 50, 60, 70, 80 (Km x 1000)

  • Replace hydraulic clutch fluid
    Primary and gearbox
    Factory

    Manual: Clutch fluid. Factory: Footnote: every 2 years or 20000 Km

  • Transmission cables and controls
    Primary and gearbox
    Factory

    Factory: As printed: I at 1.5, 10, 20, 30, 40, 50, 60, 70, 80 (Km x 1000)

  • Change final drive (rear drive) oil
    Final drive
    Factory

    Manual: Final drive oil. Factory: First 1,500 km

  • Steering bearings and steering clearance
    Front end
    Factory

    Factory: As printed: I at 1.5, 10, 20, 30, 40, 50, 60, 70, 80 (Km x 1000)

  • Brake discs
    Brakes
    Factory

    Factory: As printed: I at 1.5, 10, 20, 30, 40, 50, 60, 70, 80 (Km x 1000)

  • Brake pad wear (1)
    Brakes
    Factory

    Factory: As printed: I at 1.5, 10, 20, 30, 40, 50, 60, 70, 80 (Km x 1000); (1) Check and clean and adjust or replace, if necessary, before every journey.

  • Inspect brake hoses; replace old rubber
    Brakes
    Factory

    Manual: Brake lines. Factory: Replace every 4 years

  • Tires - pressure / wear (1)
    Wheels and tires
    Factory

    Factory: As printed: I at 1.5, 10, 20, 30, 40, 50, 60, 70, 80 (Km x 1000); (1) Check and clean and adjust or replace, if necessary, before every journey.

  • Wheel bearings
    Wheels and tires
    Factory

    Factory: As printed: I at 10, 20, 30, 40, 50, 60, 70, 80 (Km x 1000)

  • Wheels
    Wheels and tires
    Factory

    Factory: As printed: I at 1.5, 10, 20, 30, 40, 50, 60, 70, 80 (Km x 1000)

Every 10,000 mi or 2 years

1 item
  • Compression test (or leak-down)
    Engine
    Guideline

Every 12,000 mi or 2 years

1 item
  • Grease swingarm pivot
    Rear suspension and frame
    Guideline

Every 12,427 mi or 2 years

2 items
  • Clutch fluid (2) (replace)
    Primary and gearbox
    Factory

    Factory: As printed: (2) Replace every 2 years or 20000 Km (12427 mi).

  • Replace brake fluid
    Brakes
    Factory

    Manual: Brake fluid. Factory: Replace every 2 years or 20000 Km (12427 mi)

Every 12,427 mi

11 items
  • Alternator belt
    Engine
    Factory

    Factory: Adjust at 20,000 km intervals; replace at 50,000 km

  • Exhaust pipe flange bolts
    Engine
    Factory

    Factory: As printed: I at 1.5, 20, 40, 60, 80 (Km x 1000)

  • Safety switches
    Engine
    Factory

    Factory: As printed: I at 1.5, 20, 40, 60, 80 (Km x 1000)

  • Suspension and setting
    Engine
    Factory

    Factory: As printed: I at 1.5, 20, 40, 60, 80 (Km x 1000)

  • Throttle body
    Engine
    Factory

    Factory: As printed: C at 20, 40, 60, 80 (Km x 1000)

  • Air filter (I)
    Fuel and air
    Factory

    Factory: As printed: I at 10, 30, 50, 70; R at 20, 40, 60, 80 (Km x 1000)

  • Replace air filter element
    Fuel and air
    Factory

    Manual: Air filter. Factory: Inspect at 10,000 km intermediate services

  • Battery terminals tightening
    Ignition and electrics
    Factory

    Factory: As printed: I at 1.5, 20, 40, 60, 80 (Km x 1000)

  • Change fork oil
    Front end
    Factory

    Manual: Fork oil / oil seals. Factory: Replaced at 10, 30, 50, 70 x1000 km

  • Fork
    Front end
    Factory

    Factory: As printed: I at 1.5, 20, 40, 60, 80 (Km x 1000)

  • Brake fluid (2) (I)
    Brakes
    Factory

    Factory: As printed: I at 1.5, 10, 30, 50, 70; R at 20, 40, 60, 80 (Km x 1000); (2) Replace every 2 years or 20000 Km (12427 mi).

Every 20,000 mi or 4 years

3 items
  • Lubricate drive shaft splines / check U-joint
    Final drive
    Guideline
  • Repack / replace steering head bearings
    Front end
    Guideline

    Many old machines use loose balls in cups and cones. Taper roller conversions are common.

  • Repack / replace wheel bearings
    Wheels and tires
    Guideline

    Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 24,000 mi or 4 years

1 item
  • Replace fuel filter
    Fuel and air
    Guideline

Every 25,000 mi or 6 years

1 item
  • Replace swingarm bushes / bearings
    Rear suspension and frame
    Guideline

Every 30,000 mi or 6 years

1 item
  • Rebuild forks: seals, bushes, springs
    Front end
    Guideline

Every 6 months

1 item
  • Clean battery terminals, check charge and strap
    Ignition and electrics
    Guideline

Every 2 years

2 items
  • Inspect wiring, bullet connectors and ground points
    Ignition and electrics
    Guideline
  • Inspect frame, welds and lugs for cracks
    Rear suspension and frame
    Guideline

Every 4 years

3 items
  • Fuel lines (3) (replace)
    Fuel and air
    Factory

    Factory: As printed: (3) Replace every 4 years.

  • Brake lines (3) (replace)
    Brakes
    Factory

    Factory: As printed: (3) Replace every 4 years.

  • Rebuild calipers and master cylinders (seals)
    Brakes
    Guideline

Every 6 years

1 item
  • Replace tires on age (regardless of tread)
    Wheels and tires
    Guideline

No interval set

2 items
  • Alternator belt (R)
    Engine
    Factory

    Factory: Printed per the re-read doubt: Alternator belt prints A at 20, 40, 60, 80 and R at 50 (Km x 1000); the R is a single mark, so no repeat interval. The existing entry holds the adjust. (From the re-read doubt notes: Moto Guzzi Norge GT 8V, printed line or second operation stated in the DOUBT line.)

  • Engine oil pressure warning light (4)
    Engine
    Factory

    Factory: As printed: (4) Check at each engine start.

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.

Keep up with this schedule on your phone

Add the bike in the app and this chart loads itself, ready to log against and edit.

Coming soon to Google Play

Other 2012 Moto Guzzi models

All 2012 Moto Guzzi