No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

Moto Guzzi · Shim-adjusted overhead-cam four-stroke twin, wet sump, separate gearbox oil, shaft drive

V100 Mandello

Library entry covers 2022-2024

34 factory 49 guideline

Published source

Moto Guzzi V100 Mandello 2023 Bedienungsanleitung (German), Tabelle planmaessige Wartung pp.196-198

Factory source. Covers V100 Mandello 2023 Bedienungsanleitung (ManualsLib title; also listed for V100 Mandello S 2023); other years not compared.

83 items for a 2024 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, shim adjusted (incl. desmo)
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Liquid cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Separate gearbox oil
Clutch control: Hand lever, cable
Final drive: Shaft
Front suspension: Telescopic fork
Rear suspension: Swingarm, single shock / cantilever
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

2024 Moto Guzzi V100 Mandello

On the road: every 200 mi

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 300 mi

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

On the road: every 500 mi

1 item

Check coolant level

Pre-ride / on the road

Guideline

Every 1,000 mi or 6 months

1 item

Inspect tire tread, sidewalls and date codes

Wheels and tires

Guideline

Every 3,000 mi or 12 months

7 items

Check throttle cable(s) free play and return

Fuel and air

Guideline
Check steering head bearing adjustment

Front end

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline
Check brake pads and discs

Brakes

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 4,000 mi or 12 months

2 items

Inspect, clean and gap spark plugs

Engine

Guideline
Adjust clutch free play, lubricate cable and lever pivot

Primary and gearbox

Guideline

Every 5,000 mi or 12 months

2 items

Change engine oil

Engine

Guideline

Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.
Replace oil filter

Engine

Guideline

Every 6,000 mi or 12 months

8 items

Inspect coolant hoses and clamps

Engine

Guideline
Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check final drive for leaks and bearing play

Final drive

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 7,456 mi or 12 months

15 items

Diagnosis with tester (perform)

Engine

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): I at 1,500 km, every 12,000 km, every 12 months. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
Engine oil (replace)

Engine

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): R at 1,500 km, every 12,000 km and every 12 months; check every 500 km (note 3). Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
Engine oil filter (replace)

Engine

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): R at 1,500 km, every 12,000 km and every 12 months. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
Filter housing drain plug (clean)

Engine

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): C every 12,000 km and every 12 months. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
General vehicle operation (inspect)

Engine

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): I at 1,500 km, every 12,000 km, every 12 months. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
Lighting system (inspect)

Engine

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): I at 1,500 km, every 12,000 km, every 12 months. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
Oil drain plug aluminum washer and oil filter bolt washer (replace)

Engine

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): R at 1,500 km, every 12,000 km and every 12 months. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
Oil filler cap O-ring (inspect)

Engine

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): I at 1,500 km, every 12,000 km, every 12 months. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
Safety switches (inspect)

Engine

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): I at 1,500 km, every 12,000 km, every 12 months. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
Fuel lines (inspect)

Fuel and air

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): I every 12,000 km and every 12 months. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
Steering bearings and steering play (inspect)

Front end

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): I at 1,500 km, every 12,000 km, every 12 months. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
Brake discs and pad wear (inspect)

Brakes

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): I at 1,500 km, every 12,000 km, every 12 months; check every 1,000 km (note 4). Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
Brake systems (inspect)

Brakes

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): I at 1,500 km, every 12,000 km, every 12 months. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
Front wheel bearing (inspect)

Wheels and tires

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): I every 12,000 km and every 12 months. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
Tire pressure and wear (inspect)

Wheels and tires

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): I at 1,500 km, every 12,000 km, every 12 months; check every month (note 2). Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.

Every 7,456 mi

7 items

Bolt and nut tightness (inspect)

Engine

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): I at 1,500 km and every 12,000 km. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
Cylinder head cover damper bushings and mounting bolts (inspect)

Engine

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): I at 1,500 km and every 12,000 km. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
Cylinder head cover gasket (inspect)

Engine

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): I at 1,500 km and every 12,000 km. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
Headlight aim (inspect)

Engine

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): I every 12,000 km. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
Air filter (replace)

Fuel and air

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): R every 12,000 km. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
Fork oil seals (inspect)

Front end

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): I at 12,000, 24,000, 36,000, 60,000 and 72,000 km; replace if leaking (note 1). Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
Brake lines (inspect)

Brakes

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): I every 12,000 km. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.

Every 10,000 mi or 2 years

2 items

Compression test (or leak-down)

Engine

Guideline
Change gearbox oil

Primary and gearbox

Guideline

Every 12,000 mi or 2 years

5 items

Replace air filter element

Fuel and air

Guideline
Synchronize throttle bodies

Fuel and air

Guideline
Change final drive (rear drive) oil

Final drive

Guideline
Clean and grease rear suspension linkage

Rear suspension and frame

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 14,913 mi or 12 months

1 item

Suspension and chassis (inspect)

Engine

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): I at 24,000, 48,000 and 72,000 km and every 12 months. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.

Every 14,913 mi or 2 years

1 item

Alternator belt (replace)

Engine

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): I at 12,000, 36,000 and 60,000 km; R at 24,000, 48,000 and 72,000 km and every 24 months. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.

Every 14,913 mi

5 items

Final drive oil (replace)

Engine

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): R at 24,000, 48,000 and 72,000 km. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
Spark plugs (inspect)

Engine

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): I at 12,000, 36,000 and 60,000 km. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
Spark plugs (replace)

Engine

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): R at 24,000, 48,000 and 72,000 km. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
Valve clearance (inspect, adjust)

Engine

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): I at 24,000, 48,000 and 72,000 km. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
Gearbox oil drain plug washer and filler cap washer (replace)

Primary and gearbox

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): R at 24,000, 48,000 and 72,000 km (the table has no separate gearbox oil row). Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.

Every 15,000 mi or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 15,000 mi or 4 years

1 item

Check valve clearances (shim adjusted)

Engine

Guideline

Every 16,000 mi or 4 years

1 item

Replace spark plugs

Engine

Guideline

Every 20,000 mi or 4 years

3 items

Lubricate drive shaft splines / check U-joint

Final drive

Guideline
Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 24,000 mi or 4 years

1 item

Replace fuel filter

Fuel and air

Guideline

Every 25,000 mi or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 29,826 mi or 4 years

1 item

Fork oil (replace)

Front end

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): R at 48,000 km; note 5: at 48,000 km or 4 years, whichever comes first. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.

Every 29,826 mi

1 item

Fork cap O-ring (inspect)

Front end

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): I at 48,000 km. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.

Every 30,000 mi or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

7 items

Coolant (replace)

Engine

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): I at 1,500 km, every 12,000 km, every 12 months; R every 24 months. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
Replace coolant

Engine

Guideline
Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Clutch fluid (replace)

Primary and gearbox

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): I at 1,500 km, every 12,000 km, every 12 months; R every 24 months. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Brake fluid (replace)

Brakes

Factory

Factory: Tabelle planmaessige Wartung (pp.196-198): I at 1,500 km, every 12,000 km, every 12 months; R every 24 months. Columns as printed: 1,500 km, 12,000, 24,000, 36,000, 48,000, 60,000 and 72,000 km, every 12 months, every 24 months. Maintenance coupons are due at the time intervals even if the mileage has not been reached. With sporty riding, or on wet, dusty or rough roads, double the frequency. Translated from German.
Replace brake fluid

Brakes

Guideline

Every 4 years

3 items

Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.