No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

Peugeot · Shim-adjusted overhead-cam four-stroke single, wet sump, separate gearbox oil, CVT belt drive

Kisbee 50

Library entry covers 2012-2025

17 factory 48 guideline

Published source

Peugeot Kisbee Workshop Manual, Service schedule and commissioning p.10 (ManualsLib 976572 page 12)

Factory service manual. Covers Peugeot Kisbee workshop manual (four-stroke Kisbee; valve clearances listed); the two-stroke Kisbee years are not covered.

65 items for a 2024 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, shim adjusted (incl. desmo)
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Air / oil cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Separate gearbox oil
Clutch control: Hand lever, cable
Final drive: Belt CVT, scooter automatic
Front suspension: Telescopic fork
Rear suspension: Swingarm, single shock / cantilever
Front brake: Disc, hydraulic
Rear brake: Drum (or band / belt rim)
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

2024 Peugeot Kisbee 50

On the road: every 300 km

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

Every 1,600 km or 6 months

2 items

Adjust rear drum brake and rod / cable linkage

Brakes

Guideline
Inspect tire tread, sidewalls and date codes

Wheels and tires

Guideline

Every 5,000 km or 12 months

13 items

Drive pulley bearings and guides (check)

Engine

Factory

Factory: Service schedule (p.10): V at 5,000 km (heavy duty 2,500 km; minimum 12 months); 15,000 km (heavy duty 7,500 km; minimum 36 months). Also C at 10,000 km (heavy duty 5,000 km; minimum 24 months); C at 20,000 km (heavy duty 10,000 km; minimum 48 months). Codes: V = check, clean, adjust; N = clean; R = change; C = inspect and change if necessary; G = check, clean, lubricate. The table gives three header rows: normal distance, heavy-duty distance (half) and minimum servicing by time.
Engine oil and strainer (change, clean)

Engine

Factory

Factory: Service schedule (p.10): R at 500 km (heavy duty 500 km; minimum 1 month); 2,000 km (heavy duty 1,000 km; minimum 6 months); 5,000 km (heavy duty 2,500 km; minimum 12 months); 10,000 km (heavy duty 5,000 km; minimum 24 months); 15,000 km (heavy duty 7,500 km; minimum 36 months); 20,000 km (heavy duty 10,000 km; minimum 48 months). Codes: V = check, clean, adjust; N = clean; R = change; C = inspect and change if necessary; G = check, clean, lubricate. The table gives three header rows: normal distance, heavy-duty distance (half) and minimum servicing by time.
Relay box oil (change)

Engine

Factory

Factory: Service schedule (p.10): R at 500 km (heavy duty 500 km; minimum 1 month); 5,000 km (heavy duty 2,500 km; minimum 12 months); 10,000 km (heavy duty 5,000 km; minimum 24 months); 15,000 km (heavy duty 7,500 km; minimum 36 months); 20,000 km (heavy duty 10,000 km; minimum 48 months). Codes: V = check, clean, adjust; N = clean; R = change; C = inspect and change if necessary; G = check, clean, lubricate. The table gives three header rows: normal distance, heavy-duty distance (half) and minimum servicing by time.
Spark plug (change)

Engine

Factory

Factory: Service schedule (p.10): R at 5,000 km (heavy duty 2,500 km; minimum 12 months); 10,000 km (heavy duty 5,000 km; minimum 24 months); 15,000 km (heavy duty 7,500 km; minimum 36 months); 20,000 km (heavy duty 10,000 km; minimum 48 months). Also V at 500 km (heavy duty 500 km; minimum 1 month). Codes: V = check, clean, adjust; N = clean; R = change; C = inspect and change if necessary; G = check, clean, lubricate. The table gives three header rows: normal distance, heavy-duty distance (half) and minimum servicing by time.
Valve clearances (check, adjust)

Engine

Factory

Factory: Service schedule (p.10): V at 2,000 km (heavy duty 1,000 km; minimum 6 months); 5,000 km (heavy duty 2,500 km; minimum 12 months); 10,000 km (heavy duty 5,000 km; minimum 24 months); 15,000 km (heavy duty 7,500 km; minimum 36 months); 20,000 km (heavy duty 10,000 km; minimum 48 months). First at 2,000 km. Codes: V = check, clean, adjust; N = clean; R = change; C = inspect and change if necessary; G = check, clean, lubricate. The table gives three header rows: normal distance, heavy-duty distance (half) and minimum servicing by time.
Check throttle cable(s) free play and return

Fuel and air

Guideline
Check steering head bearing adjustment

Front end

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline
Check brake pads and discs

Brakes

Guideline
Joints: center stand, brake levers, rear brake cam (lubricate)

Brakes

Factory

Factory: Service schedule (p.10): G at 5,000 km (heavy duty 2,500 km; minimum 12 months); 10,000 km (heavy duty 5,000 km; minimum 24 months); 15,000 km (heavy duty 7,500 km; minimum 36 months); 20,000 km (heavy duty 10,000 km; minimum 48 months). Codes: V = check, clean, adjust; N = clean; R = change; C = inspect and change if necessary; G = check, clean, lubricate. The table gives three header rows: normal distance, heavy-duty distance (half) and minimum servicing by time.
Check wheel bearings for play

Wheels and tires

Guideline

Every 6,500 km or 12 months

4 items

Inspect, clean and gap spark plugs

Engine

Guideline
Adjust clutch free play, lubricate cable and lever pivot

Primary and gearbox

Guideline
Inspect CVT drive belt, rollers / sliders and clutch shoes

Final drive

Guideline

Typical scooter interval. Your owner's manual figure governs; check belt width against the service limit.
Lubricate brake cam spindles, check linings and drums

Brakes

Guideline

Every 8,000 km or 12 months

2 items

Change engine oil

Engine

Guideline

Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.
Replace oil filter

Engine

Guideline

Every 9,500 km or 12 months

6 items

Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 10,000 km or 2 years

6 items

Drive pulley bearings and guides (inspect, change if necessary)

Engine

Factory

Factory: Service schedule (p.10): C at 10,000 km (heavy duty 5,000 km; minimum 24 months); 20,000 km (heavy duty 10,000 km; minimum 48 months). Also V at 5,000 km (heavy duty 2,500 km; minimum 12 months); V at 15,000 km (heavy duty 7,500 km; minimum 36 months). Codes: V = check, clean, adjust; N = clean; R = change; C = inspect and change if necessary; G = check, clean, lubricate. The table gives three header rows: normal distance, heavy-duty distance (half) and minimum servicing by time.
Intake muffler drain (clean)

Engine

Factory

Factory: Service schedule (p.10): N at 10,000 km (heavy duty 5,000 km; minimum 24 months); 20,000 km (heavy duty 10,000 km; minimum 48 months). Codes: V = check, clean, adjust; N = clean; R = change; C = inspect and change if necessary; G = check, clean, lubricate. The table gives three header rows: normal distance, heavy-duty distance (half) and minimum servicing by time.
Kick starter mechanism (check, clean, lubricate)

Engine

Factory

Factory: Service schedule (p.10): G at 10,000 km (heavy duty 5,000 km; minimum 24 months); 20,000 km (heavy duty 10,000 km; minimum 48 months). Codes: V = check, clean, adjust; N = clean; R = change; C = inspect and change if necessary; G = check, clean, lubricate. The table gives three header rows: normal distance, heavy-duty distance (half) and minimum servicing by time.
Air filter (change)

Fuel and air

Factory

Factory: Service schedule (p.10): R at 10,000 km (heavy duty 5,000 km; minimum 24 months); 20,000 km (heavy duty 10,000 km; minimum 48 months). Codes: V = check, clean, adjust; N = clean; R = change; C = inspect and change if necessary; G = check, clean, lubricate. The table gives three header rows: normal distance, heavy-duty distance (half) and minimum servicing by time.
Carburetor setting (check)

Fuel and air

Factory

Factory: Service schedule (p.10): V at 10,000 km (heavy duty 5,000 km; minimum 24 months); 20,000 km (heavy duty 10,000 km; minimum 48 months). Codes: V = check, clean, adjust; N = clean; R = change; C = inspect and change if necessary; G = check, clean, lubricate. The table gives three header rows: normal distance, heavy-duty distance (half) and minimum servicing by time.
Transmission belt (change)

Primary and gearbox

Factory

Factory: Service schedule (p.10): R at 10,000 km (heavy duty 5,000 km; minimum 24 months); 20,000 km (heavy duty 10,000 km; minimum 48 months). Codes: V = check, clean, adjust; N = clean; R = change; C = inspect and change if necessary; G = check, clean, lubricate. The table gives three header rows: normal distance, heavy-duty distance (half) and minimum servicing by time.

Every 16,000 km or 2 years

2 items

Compression test (or leak-down)

Engine

Guideline
Change gearbox oil

Primary and gearbox

Guideline

Every 19,500 km or 2 years

4 items

Replace air filter element

Fuel and air

Guideline
Synchronize throttle bodies

Fuel and air

Guideline
Clean and grease rear suspension linkage

Rear suspension and frame

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 19,500 km or 3 years

1 item

Replace CVT drive belt

Final drive

Guideline

Typical scooter interval, or sooner if the belt is cracked, glazed or below its width limit.

Every 20,000 km or 4 years

2 items

Fuel filter (change)

Fuel and air

Factory

Factory: Service schedule (p.10): R at 20,000 km (heavy duty 10,000 km; minimum 48 months). Codes: V = check, clean, adjust; N = clean; R = change; C = inspect and change if necessary; G = check, clean, lubricate. The table gives three header rows: normal distance, heavy-duty distance (half) and minimum servicing by time.
Fork oil (change)

Front end

Factory

Factory: Service schedule (p.10): R at 20,000 km (heavy duty 10,000 km; minimum 48 months). Codes: V = check, clean, adjust; N = clean; R = change; C = inspect and change if necessary; G = check, clean, lubricate. The table gives three header rows: normal distance, heavy-duty distance (half) and minimum servicing by time.

Every 24,000 km or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 24,000 km or 4 years

1 item

Check valve clearances (shim adjusted)

Engine

Guideline

Every 24,000 km

1 item

Replace brake linings / skim drums (wear based)

Brakes

Guideline

Every 25,500 km or 4 years

1 item

Replace spark plugs

Engine

Guideline

Every 32,000 km or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 38,500 km or 4 years

1 item

Replace fuel filter

Fuel and air

Guideline

Every 40,000 km or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 48,500 km or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

4 items

Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Brake fluid (change)

Brakes

Factory

Factory: Service schedule (p.10), printed across the columns: once every 2 years. Codes: V = check, clean, adjust; N = clean; R = change; C = inspect and change if necessary; G = check, clean, lubricate. The table gives three header rows: normal distance, heavy-duty distance (half) and minimum servicing by time.
Replace brake fluid

Brakes

Guideline

Every 4 years

3 items

Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 5 years

1 item

Fuel pipe (change)

Fuel and air

Factory

Factory: Service schedule (p.10), printed across the columns: once every 5 years. Codes: V = check, clean, adjust; N = clean; R = change; C = inspect and change if necessary; G = check, clean, lubricate. The table gives three header rows: normal distance, heavy-duty distance (half) and minimum servicing by time.

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

No interval set

1 item

Spark plug (check)

Engine

Factory

Factory: Service schedule (p.10): V at 500 km (heavy duty 500 km; minimum 1 month). Also R at 5,000 km (heavy duty 2,500 km; minimum 12 months); R at 10,000 km (heavy duty 5,000 km; minimum 24 months); R at 15,000 km (heavy duty 7,500 km; minimum 36 months); R at 20,000 km (heavy duty 10,000 km; minimum 48 months). Checked at 500 km only. Codes: V = check, clean, adjust; N = clean; R = change; C = inspect and change if necessary; G = check, clean, lubricate. The table gives three header rows: normal distance, heavy-duty distance (half) and minimum servicing by time.

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.