MotoService Log
No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

Quadro · Overhead-cam four-stroke single, wet sump, separate gearbox oil, CVT belt drive

3 (346 cc)

Library entry covers 2014-2019

25 factory 47 guideline

Published source

Quadro 3 User Manual, 6.18 Scheduled maintenance pp.76-77

Factory owner's handbook. Covers Quadro 3 user manual (ManualsLib 2574863), no year printed.

72 items for a 2015 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)
Engine cycle
Four-stroke
Engine lubrication
Wet sump (oil in crankcase)
Oil filtration
Replaceable cartridge or spin-on filter
Valve gear
Overhead cam, screw/locknut adjusters
Ignition
Electronic (CDI / transistor / ECU)
Charging
Alternator / stator with rectifier
Battery
Wet cell (flooded lead-acid, needs topping up)
Fuel system
Single carburetor
Cooling
Liquid cooled
Primary drive
Gear or chain inside engine, shares engine oil
Gearbox oil
Separate gearbox oil
Clutch control
Automatic or semi-automatic
Final drive
Belt CVT, scooter automatic
Front suspension
Telescopic fork
Rear suspension
Swingarm, twin shocks
Front brake
Disc, hydraulic
Rear brake
Disc, hydraulic
Wheels
Cast / alloy, tubeless
Sidecar
No sidecar
Maintenance schedule

2015 Quadro 3 (346 cc)

On the road: every 200 mi

1 item
  • Check engine oil level
    Pre-ride / on the road
    Guideline

    Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 300 mi

2 items
  • Check lights, horn, brake light switches
    Pre-ride / on the road
    Guideline
  • Check tire pressures
    Pre-ride / on the road
    Guideline

On the road: every 500 mi

1 item
  • Check coolant level
    Pre-ride / on the road
    Guideline

Every 600 mi

1 item
  • Engine oil level (check)
    Engine
    Factory

    Factory: Check engine oil level every 1,000 km (note 2)

Every 1,000 mi or 6 months

1 item
  • Inspect tire tread, sidewalls and date codes
    Wheels and tires
    Guideline

Every 3,000 mi or 12 months

9 items
  • Check throttle cable(s) free play and return
    Fuel and air
    Guideline
  • Clean fuel tap filter / sediment bowl
    Fuel and air
    Guideline
  • Adjust automatic / semi-automatic clutch
    Primary and gearbox
    Guideline
  • Check steering head bearing adjustment
    Front end
    Guideline
  • Inspect fork seals, stanchions and fork boots
    Front end
    Guideline
  • Check footrests, pegs, rear brake and gear lever pivots
    Rear suspension and frame
    Guideline
  • Grease and check center / side stand and springs
    Rear suspension and frame
    Guideline
  • Check brake pads and discs
    Brakes
    Guideline
  • Check wheel bearings for play
    Wheels and tires
    Guideline

Every 3,100 mi or 12 months

1 item
  • Engine oil (replace)
    Engine
    Factory

    Factory: Scheduled maintenance chart columns: 1,000 km, then every 5,000 km to 40,000 km. Key: C replace, I check/inspection, D EFI software diagnostic, A adjust, I/C inspect and replace if necessary, I/A inspect and top up if necessary, I/R inspect and adjust if necessary. Services due at the specified times even if mileage is not reached. C at every column; replace every 5,000 km or within a year (note 4)

Every 3,100 mi

16 items
  • Articulated parallelogram (inspect)
    Engine
    Factory

    Factory: Scheduled maintenance chart columns: 1,000 km, then every 5,000 km to 40,000 km. Key: C replace, I check/inspection, D EFI software diagnostic, A adjust, I/C inspect and replace if necessary, I/A inspect and top up if necessary, I/R inspect and adjust if necessary. Services due at the specified times even if mileage is not reached. I at 1,000, 5,000 and 10,000 km; I/C from 15,000 km

  • Coolant level (inspect)
    Engine
    Factory

    Factory: Scheduled maintenance chart columns: 1,000 km, then every 5,000 km to 40,000 km. Key: C replace, I check/inspection, D EFI software diagnostic, A adjust, I/C inspect and replace if necessary, I/A inspect and top up if necessary, I/R inspect and adjust if necessary. Services due at the specified times even if mileage is not reached. I/R at every column; C at 40,000 km

  • Drive belt (inspect, replace if necessary)
    Engine
    Factory

    Factory: Scheduled maintenance chart columns: 1,000 km, then every 5,000 km to 40,000 km. Key: C replace, I check/inspection, D EFI software diagnostic, A adjust, I/C inspect and replace if necessary, I/A inspect and top up if necessary, I/R inspect and adjust if necessary. Services due at the specified times even if mileage is not reached. I at 1,000 km; I/C every 5,000 km

  • Engine oil filter (replace)
    Engine
    Factory

    Factory: Scheduled maintenance chart columns: 1,000 km, then every 5,000 km to 40,000 km. Key: C replace, I check/inspection, D EFI software diagnostic, A adjust, I/C inspect and replace if necessary, I/A inspect and top up if necessary, I/R inspect and adjust if necessary. Services due at the specified times even if mileage is not reached. C at every column

  • Fixed elements (check)
    Engine
    Factory

    Factory: Scheduled maintenance chart columns: 1,000 km, then every 5,000 km to 40,000 km. Key: C replace, I check/inspection, D EFI software diagnostic, A adjust, I/C inspect and replace if necessary, I/A inspect and top up if necessary, I/R inspect and adjust if necessary. Services due at the specified times even if mileage is not reached. I at every column

  • Front suspension bearing (inspect)
    Engine
    Factory

    Factory: Scheduled maintenance chart columns: 1,000 km, then every 5,000 km to 40,000 km. Key: C replace, I check/inspection, D EFI software diagnostic, A adjust, I/C inspect and replace if necessary, I/A inspect and top up if necessary, I/R inspect and adjust if necessary. Services due at the specified times even if mileage is not reached. I at 1,000, 5,000 and 10,000 km; I/C from 15,000 km

  • HTS oil (check)
    Engine
    Factory

    Factory: Scheduled maintenance chart columns: 1,000 km, then every 5,000 km to 40,000 km. Key: C replace, I check/inspection, D EFI software diagnostic, A adjust, I/C inspect and replace if necessary, I/A inspect and top up if necessary, I/R inspect and adjust if necessary. Services due at the specified times even if mileage is not reached. I at every column; I/C at 30,000 km

  • Hydraulic tilting system (check)
    Engine
    Factory

    Factory: Scheduled maintenance chart columns: 1,000 km, then every 5,000 km to 40,000 km. Key: C replace, I check/inspection, D EFI software diagnostic, A adjust, I/C inspect and replace if necessary, I/A inspect and top up if necessary, I/R inspect and adjust if necessary. Services due at the specified times even if mileage is not reached. I at every column

  • Injection system (diagnostic)
    Engine
    Factory

    Factory: Scheduled maintenance chart columns: 1,000 km, then every 5,000 km to 40,000 km. Key: C replace, I check/inspection, D EFI software diagnostic, A adjust, I/C inspect and replace if necessary, I/A inspect and top up if necessary, I/R inspect and adjust if necessary. Services due at the specified times even if mileage is not reached. D at every column

  • Mechanical caliper parking (inspect)
    Engine
    Factory

    Factory: Scheduled maintenance chart columns: 1,000 km, then every 5,000 km to 40,000 km. Key: C replace, I check/inspection, D EFI software diagnostic, A adjust, I/C inspect and replace if necessary, I/A inspect and top up if necessary, I/R inspect and adjust if necessary. Services due at the specified times even if mileage is not reached. I/A at every column

  • Battery tension (check)
    Ignition and electrics
    Factory

    Factory: Scheduled maintenance chart columns: 1,000 km, then every 5,000 km to 40,000 km. Key: C replace, I check/inspection, D EFI software diagnostic, A adjust, I/C inspect and replace if necessary, I/A inspect and top up if necessary, I/R inspect and adjust if necessary. Services due at the specified times even if mileage is not reached. I at every column

  • Steering wheel (inspect)
    Front end
    Factory

    Factory: Scheduled maintenance chart columns: 1,000 km, then every 5,000 km to 40,000 km. Key: C replace, I check/inspection, D EFI software diagnostic, A adjust, I/C inspect and replace if necessary, I/A inspect and top up if necessary, I/R inspect and adjust if necessary. Services due at the specified times even if mileage is not reached. I at 1,000 km; I/C at 25,000, 30,000, 35,000 and 40,000 km

  • Brake fluid level (inspect)
    Brakes
    Factory

    Factory: Scheduled maintenance chart columns: 1,000 km, then every 5,000 km to 40,000 km. Key: C replace, I check/inspection, D EFI software diagnostic, A adjust, I/C inspect and replace if necessary, I/A inspect and top up if necessary, I/R inspect and adjust if necessary. Services due at the specified times even if mileage is not reached. I/R at every column; C at 40,000 km

  • Brake pads (inspect, replace if necessary)
    Brakes
    Factory

    Factory: Scheduled maintenance chart columns: 1,000 km, then every 5,000 km to 40,000 km. Key: C replace, I check/inspection, D EFI software diagnostic, A adjust, I/C inspect and replace if necessary, I/A inspect and top up if necessary, I/R inspect and adjust if necessary. Services due at the specified times even if mileage is not reached. I at 1,000 km; I/C every 5,000 km

  • Tire pressure and wear (inspect)
    Wheels and tires
    Factory

    Factory: Scheduled maintenance chart columns: 1,000 km, then every 5,000 km to 40,000 km. Key: C replace, I check/inspection, D EFI software diagnostic, A adjust, I/C inspect and replace if necessary, I/A inspect and top up if necessary, I/R inspect and adjust if necessary. Services due at the specified times even if mileage is not reached. I/C at every column

  • Throttle control free play (check)
    Controls and cables
    Factory

    Factory: Scheduled maintenance chart columns: 1,000 km, then every 5,000 km to 40,000 km. Key: C replace, I check/inspection, D EFI software diagnostic, A adjust, I/C inspect and replace if necessary, I/A inspect and top up if necessary, I/R inspect and adjust if necessary. Services due at the specified times even if mileage is not reached. I at every column

Every 4,000 mi or 12 months

2 items
  • Inspect, clean and gap spark plugs
    Engine
    Guideline
  • Inspect CVT drive belt, rollers / sliders and clutch shoes
    Final drive
    Guideline

    Typical scooter interval. Your owner's manual figure governs; check belt width against the service limit.

Every 5,000 mi or 12 months

2 items
  • Change engine oil
    Engine
    Guideline

    Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.

  • Replace oil filter
    Engine
    Guideline

Every 6,000 mi or 12 months

8 items
  • Inspect coolant hoses and clamps
    Engine
    Guideline
  • Clean / inspect air filter
    Fuel and air
    Guideline

    Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.

  • Clean carburetor float bowl(s), check float level and jets
    Fuel and air
    Guideline

    Ethanol fuel varnishes old carbs quickly in storage.

  • Check charging voltage and regulator / cut-out
    Ignition and electrics
    Guideline
  • Check swingarm bushes for play
    Rear suspension and frame
    Guideline
  • Inspect rear shocks for leaks and damping
    Rear suspension and frame
    Guideline
  • Lubricate control cables and lever pivots
    Controls and cables
    Guideline
  • Lubricate speedometer / tachometer cables, check drive
    Controls and cables
    Guideline

    A dry speedo cable whips the needle and eventually kills the instrument.

Every 6,200 mi

3 items
  • Final drive oil (replace)
    Engine
    Factory

    Factory: Scheduled maintenance chart columns: 1,000 km, then every 5,000 km to 40,000 km. Key: C replace, I check/inspection, D EFI software diagnostic, A adjust, I/C inspect and replace if necessary, I/A inspect and top up if necessary, I/R inspect and adjust if necessary. Services due at the specified times even if mileage is not reached. C at 1,000, 10,000, 20,000, 30,000 and 40,000 km; I at 5,000, 15,000, 25,000 and 35,000 km

  • Valve clearance (inspect, adjust)
    Engine
    Factory

    Factory: Scheduled maintenance chart columns: 1,000 km, then every 5,000 km to 40,000 km. Key: C replace, I check/inspection, D EFI software diagnostic, A adjust, I/C inspect and replace if necessary, I/A inspect and top up if necessary, I/R inspect and adjust if necessary. Services due at the specified times even if mileage is not reached. I/A at 1,000, 10,000, 20,000, 30,000 and 40,000 km

  • Air filter (replace)
    Fuel and air
    Factory

    Factory: Scheduled maintenance chart columns: 1,000 km, then every 5,000 km to 40,000 km. Key: C replace, I check/inspection, D EFI software diagnostic, A adjust, I/C inspect and replace if necessary, I/A inspect and top up if necessary, I/R inspect and adjust if necessary. Services due at the specified times even if mileage is not reached. C at 5,000, 15,000, 25,000 and 35,000 km; I at 1,000, 10,000, 20,000, 30,000 and 40,000 km

Every 8,000 mi or 2 years

1 item
  • Check and adjust valve clearances
    Engine
    Guideline

Every 9,300 mi

1 item
  • Spark plug CR8E (replace)
    Engine
    Factory

    Factory: Scheduled maintenance chart columns: 1,000 km, then every 5,000 km to 40,000 km. Key: C replace, I check/inspection, D EFI software diagnostic, A adjust, I/C inspect and replace if necessary, I/A inspect and top up if necessary, I/R inspect and adjust if necessary. Services due at the specified times even if mileage is not reached. I at 10,000 and 20,000 km; C at 15,000, 30,000 and 40,000 km

Every 10,000 mi or 2 years

2 items
  • Compression test (or leak-down)
    Engine
    Guideline
  • Change gearbox oil
    Primary and gearbox
    Guideline

Every 12,000 mi or 2 years

2 items
  • Replace air filter element
    Fuel and air
    Guideline
  • Grease swingarm pivot
    Rear suspension and frame
    Guideline

Every 12,000 mi or 3 years

1 item
  • Replace CVT drive belt
    Final drive
    Guideline

    Typical scooter interval, or sooner if the belt is cracked, glazed or below its width limit.

Every 15,000 mi or 3 years

1 item
  • Change fork oil
    Front end
    Guideline

    Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 16,000 mi or 4 years

1 item
  • Replace spark plugs
    Engine
    Guideline

Every 20,000 mi or 4 years

2 items
  • Repack / replace steering head bearings
    Front end
    Guideline

    Many old machines use loose balls in cups and cones. Taper roller conversions are common.

  • Repack / replace wheel bearings
    Wheels and tires
    Guideline

    Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 24,900 mi

1 item
  • Timing chain (replace)
    Final drive
    Factory

    Factory: Scheduled maintenance chart columns: 1,000 km, then every 5,000 km to 40,000 km. Key: C replace, I check/inspection, D EFI software diagnostic, A adjust, I/C inspect and replace if necessary, I/A inspect and top up if necessary, I/R inspect and adjust if necessary. Services due at the specified times even if mileage is not reached. C at 40,000 km

Every 25,000 mi or 6 years

1 item
  • Replace swingarm bushes / bearings
    Rear suspension and frame
    Guideline

Every 30,000 mi or 6 years

1 item
  • Rebuild forks: seals, bushes, springs
    Front end
    Guideline

Every 6 months

1 item
  • Clean battery terminals, check charge and strap
    Ignition and electrics
    Guideline

Every 2 years

6 items
  • Coolant (replace)
    Engine
    Factory

    Factory: Replace coolant liquid every 2 years (note 3)

  • Replace coolant
    Engine
    Guideline
  • Inspect wiring, bullet connectors and ground points
    Ignition and electrics
    Guideline
  • Inspect frame, welds and lugs for cracks
    Rear suspension and frame
    Guideline
  • Brake fluid (replace)
    Brakes
    Factory

    Factory: Replace the brake fluid every 2 years (note 1)

  • Replace brake fluid
    Brakes
    Guideline

Every 4 years

3 items
  • Replace fuel lines
    Fuel and air
    Guideline

    Old rubber and modern ethanol fuel do not mix well.

  • Inspect brake hoses; replace old rubber
    Brakes
    Guideline
  • Rebuild calipers and master cylinders (seals)
    Brakes
    Guideline

Every 6 years

1 item
  • Replace tires on age (regardless of tread)
    Wheels and tires
    Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.

Keep up with this schedule on your phone

Add the bike in the app and this chart loads itself, ready to log against and edit.

Coming soon to Google Play

Other 2015 Quadro models

All 2015 Quadro
2013-2017
4 (346 cc)
Factory
2014-2015
S (346 cc)
Guideline