MotoService Log
No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

Quadro · Overhead-cam four-stroke single, wet sump, separate gearbox oil, CVT belt drive

QV3 (346 cc)

Library entry covers 2019

38 factory 47 guideline

Published source

Qooder QV3 User Manual, Planned maintenance plan pp.41-43 (ManualsLib 1698166 pages 43-45)

Factory owner's handbook. Covers QV3 User Manual (cover shows the Q logo and names only the QV3, Euro 4), undated; same document as the Qooder QV3 chart.

85 items for a 2019 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)
Engine cycle
Four-stroke
Engine lubrication
Wet sump (oil in crankcase)
Oil filtration
Replaceable cartridge or spin-on filter
Valve gear
Overhead cam, screw/locknut adjusters
Ignition
Electronic (CDI / transistor / ECU)
Charging
Alternator / stator with rectifier
Battery
Wet cell (flooded lead-acid, needs topping up)
Fuel system
Fuel injection
Cooling
Liquid cooled
Primary drive
Gear or chain inside engine, shares engine oil
Gearbox oil
Separate gearbox oil
Clutch control
Automatic or semi-automatic
Final drive
Belt CVT, scooter automatic
Front suspension
Telescopic fork
Rear suspension
Swingarm, twin shocks
Front brake
Disc, hydraulic
Rear brake
Disc, hydraulic
Wheels
Cast / alloy, tubeless
Sidecar
No sidecar
Maintenance schedule

2019 Quadro QV3 (346 cc)

On the road: every 200 mi

1 item
  • Check engine oil level
    Pre-ride / on the road
    Guideline

    Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 300 mi

2 items
  • Check lights, horn, brake light switches
    Pre-ride / on the road
    Guideline
  • Check tire pressures
    Pre-ride / on the road
    Guideline

On the road: every 500 mi

1 item
  • Check coolant level
    Pre-ride / on the road
    Guideline

Every 1,000 mi or 6 months

1 item
  • Inspect tire tread, sidewalls and date codes
    Wheels and tires
    Guideline

Every 3,000 mi or 12 months

8 items
  • Check throttle cable(s) free play and return
    Fuel and air
    Guideline
  • Adjust automatic / semi-automatic clutch
    Primary and gearbox
    Guideline
  • Check steering head bearing adjustment
    Front end
    Guideline
  • Inspect fork seals, stanchions and fork boots
    Front end
    Guideline
  • Check footrests, pegs, rear brake and gear lever pivots
    Rear suspension and frame
    Guideline
  • Grease and check center / side stand and springs
    Rear suspension and frame
    Guideline
  • Check brake pads and discs
    Brakes
    Guideline
  • Check wheel bearings for play
    Wheels and tires
    Guideline

Every 3,107 mi or 12 months

15 items
  • Engine coolant (check)
    Engine
    Factory

    Factory: Planned maintenance plan (pp.41-43): level and leak visual check at 1,000 km and every 5,000 km, and at the annual check. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • HTS switch (check)
    Engine
    Factory

    Factory: Planned maintenance plan (pp.41-43): correct operation check, support adjustment if necessary, at 1,000 km and every 5,000 km, and at the annual check. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • HTS trim (check)
    Engine
    Factory

    Factory: Planned maintenance plan (pp.41-43): trim visual check at 1,000 km and every 5,000 km, and at the annual check. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Lights, signals and switches (check)
    Engine
    Factory

    Factory: Planned maintenance plan (pp.41-43): operation check at 1,000 km and every 5,000 km, and at the annual check. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Safety locks (check)
    Engine
    Factory

    Factory: Planned maintenance plan (pp.41-43): check and tighten if necessary at 1,000 km and every 5,000 km, and at the annual check. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Throttle grip free play (check)
    Engine
    Factory

    Factory: Planned maintenance plan (pp.41-43): check and adjust if necessary at 1,000 km and every 5,000 km, and at the annual check. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Variator V-belt and rollers (check)
    Engine
    Factory

    Factory: Planned maintenance plan (pp.41-43): crack visual check at 1,000 km and every 5,000 km, and at the annual check. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Fuel circuit and evaporative emissions system (check)
    Fuel and air
    Factory

    Factory: Planned maintenance plan (pp.41-43): visual check for leaks and cracks, replace if necessary, every 5,000 km and at the annual check. Marked (*). Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Steering rods and arms (check)
    Front end
    Factory

    Factory: Planned maintenance plan (pp.41-43): play check at 1,000 km and every 5,000 km, and at the annual check. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Center stand (check, lubricate)
    Rear suspension and frame
    Factory

    Factory: Planned maintenance plan (pp.41-43): operation check and lubrication if necessary every 5,000 km and at the annual check. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Brake fluid (check)
    Brakes
    Factory

    Factory: Planned maintenance plan (pp.41-43): level and leak visual check at 1,000 km and every 5,000 km, and at the annual check. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Brake pads (check)
    Brakes
    Factory

    Factory: Planned maintenance plan (pp.41-43): front and rear pad visual check, replacement if necessary, at 1,000 km and every 5,000 km, and at the annual check. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Parking brake mechanism (check)
    Brakes
    Factory

    Factory: Planned maintenance plan (pp.41-43): play and operation check, adjustment if necessary, at 1,000 km and every 5,000 km, and at the annual check. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Tires (check)
    Wheels and tires
    Factory

    Factory: Planned maintenance plan (pp.41-43): pressure, wear and damage check, replacement if necessary, at 1,000 km and every 5,000 km, and at the annual check. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Wheels (check)
    Wheels and tires
    Factory

    Factory: Planned maintenance plan (pp.41-43): misalignment and damage check at 1,000 km and every 5,000 km, and at the annual check. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

Every 3,107 mi

4 items
  • Diagnostics (check)
    Engine
    Factory

    Factory: Planned maintenance plan (pp.41-43): inspection with the diagnostic tool and error code check at 1,000 km and every 5,000 km. Marked (*). Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Engine oil (replace)
    Engine
    Factory

    Factory: Planned maintenance plan (pp.41-43): replace at 1,000 km and every 5,000 km; SAE 10W60 API SJ, 1.6 liters (sump only), 1.7 liters with filter. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Exhaust system (check)
    Engine
    Factory

    Factory: Planned maintenance plan (pp.41-43): check, tighten if necessary, replace gasket if necessary, at 1,000 km and every 5,000 km. Marked (*). Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Steering bearings (check)
    Front end
    Factory

    Factory: Planned maintenance plan (pp.41-43): play and steering smoothness check at 1,000 km and every 5,000 km. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

Every 4,000 mi or 12 months

2 items
  • Inspect, clean and gap spark plugs
    Engine
    Guideline
  • Inspect CVT drive belt, rollers / sliders and clutch shoes
    Final drive
    Guideline

    Typical scooter interval. Your owner's manual figure governs; check belt width against the service limit.

Every 5,000 mi or 12 months

2 items
  • Change engine oil
    Engine
    Guideline

    Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.

  • Replace oil filter
    Engine
    Guideline

Every 6,000 mi or 12 months

7 items
  • Inspect coolant hoses and clamps
    Engine
    Guideline
  • Clean / inspect air filter
    Fuel and air
    Guideline

    Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.

  • Check charging voltage and regulator / cut-out
    Ignition and electrics
    Guideline
  • Check swingarm bushes for play
    Rear suspension and frame
    Guideline
  • Inspect rear shocks for leaks and damping
    Rear suspension and frame
    Guideline
  • Lubricate control cables and lever pivots
    Controls and cables
    Guideline
  • Lubricate speedometer / tachometer cables, check drive
    Controls and cables
    Guideline

    A dry speedo cable whips the needle and eventually kills the instrument.

Every 6,214 mi or 12 months

2 items
  • HTS front accumulator air pressure (check)
    Engine
    Factory

    Factory: Planned maintenance plan (pp.41-43): central front accumulator air pressure check and restoration at 1,000 km and every 10,000 km, and at the annual check. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Brake hoses (check)
    Brakes
    Factory

    Factory: Planned maintenance plan (pp.41-43): crack visual check at 10,000, 20,000, 30,000 and 40,000 km and at the annual check. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

Every 6,214 mi

8 items
  • Engine oil filter (replace)
    Engine
    Factory

    Factory: Planned maintenance plan (pp.41-43): replace at 1,000 km and every 10,000 km. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Final drive oil (check)
    Engine
    Factory

    Factory: Planned maintenance plan (pp.41-43): leak visual check at 1,000, 10,000 and 30,000 km. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Spark plugs (check gap)
    Engine
    Factory

    Factory: Planned maintenance plan (pp.41-43): gap check at 5,000, 15,000, 25,000 and 35,000 km. Marked (*). Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Spark plugs (replace)
    Engine
    Factory

    Factory: Planned maintenance plan (pp.41-43): replace at 10,000, 20,000, 30,000 and 40,000 km. Marked (*). Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Valve clearance (check, adjust)
    Engine
    Factory

    Factory: Planned maintenance plan (pp.41-43): check and adjust at 1,000 km and every 10,000 km. Marked (*). Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Variator V-belt and rollers (replace if necessary)
    Engine
    Factory

    Factory: Planned maintenance plan (pp.41-43): replacement if necessary at 10,000, 20,000, 30,000 and 40,000 km. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Clutch (check)
    Primary and gearbox
    Factory

    Factory: Planned maintenance plan (pp.41-43): visual check and replacement if necessary at 10,000, 20,000, 30,000 and 40,000 km. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Front wheel bearings (check)
    Wheels and tires
    Factory

    Factory: Planned maintenance plan (pp.41-43): play check at 10,000, 20,000, 30,000 and 40,000 km. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

Every 8,000 mi or 2 years

1 item
  • Check and adjust valve clearances
    Engine
    Guideline

Every 10,000 mi or 2 years

2 items
  • Compression test (or leak-down)
    Engine
    Guideline
  • Change gearbox oil
    Primary and gearbox
    Guideline

Every 12,000 mi or 2 years

3 items
  • Replace air filter element
    Fuel and air
    Guideline
  • Synchronize throttle bodies
    Fuel and air
    Guideline
  • Grease swingarm pivot
    Rear suspension and frame
    Guideline

Every 12,000 mi or 3 years

1 item
  • Replace CVT drive belt
    Final drive
    Guideline

    Typical scooter interval, or sooner if the belt is cracked, glazed or below its width limit.

Every 12,427 mi or 12 months

1 item
  • Engine air filter (clean)
    Fuel and air
    Factory

    Factory: Planned maintenance plan (pp.41-43): clean at 10,000 and 30,000 km and at the annual check; clean and/or replace more often in very humid or dusty conditions. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

Every 12,427 mi

2 items
  • Final drive oil (replace)
    Engine
    Factory

    Factory: Planned maintenance plan (pp.41-43): replacement and leak check at 1,000, 20,000 and 40,000 km. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Engine air filter (replace)
    Fuel and air
    Factory

    Factory: Planned maintenance plan (pp.41-43): replace at 20,000 and 40,000 km. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

Every 15,000 mi or 3 years

1 item
  • Change fork oil
    Front end
    Guideline

    Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 16,000 mi or 4 years

1 item
  • Replace spark plugs
    Engine
    Guideline

Every 20,000 mi or 4 years

2 items
  • Repack / replace steering head bearings
    Front end
    Guideline

    Many old machines use loose balls in cups and cones. Taper roller conversions are common.

  • Repack / replace wheel bearings
    Wheels and tires
    Guideline

    Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 24,000 mi or 4 years

1 item
  • Replace fuel filter
    Fuel and air
    Guideline

Every 24,855 mi

2 items
  • HTS oil (change)
    Engine
    Factory

    Factory: Planned maintenance plan (pp.41-43): oil change at 40,000 km. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Timing chain (replace)
    Final drive
    Factory

    Factory: Planned maintenance plan (pp.41-43): replace at 40,000 km. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

Every 25,000 mi or 6 years

1 item
  • Replace swingarm bushes / bearings
    Rear suspension and frame
    Guideline

Every 30,000 mi or 6 years

1 item
  • Rebuild forks: seals, bushes, springs
    Front end
    Guideline

Every 6 months

1 item
  • Clean battery terminals, check charge and strap
    Ignition and electrics
    Guideline

Every 12 months

1 item
  • Engine oil level (check)
    Engine
    Factory

    Factory: Planned maintenance plan (pp.41-43): level check at the annual check. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

Every 2 years

5 items
  • Replace coolant
    Engine
    Guideline
  • Inspect wiring, bullet connectors and ground points
    Ignition and electrics
    Guideline
  • Inspect frame, welds and lugs for cracks
    Rear suspension and frame
    Guideline
  • Brake fluid (change)
    Brakes
    Factory

    Factory: Planned maintenance plan (pp.41-43): change every 24 months. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Replace brake fluid
    Brakes
    Guideline

Every 3 years

1 item
  • Engine coolant (replace)
    Engine
    Factory

    Factory: Planned maintenance plan (pp.41-43): replace every 36 months. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

Every 4 years

4 items
  • Replace fuel lines
    Fuel and air
    Guideline

    Old rubber and modern ethanol fuel do not mix well.

  • Brake hoses (replace)
    Brakes
    Factory

    Factory: Planned maintenance plan (pp.41-43): replace every 48 months. Columns: 1,000 km (600 mi), then every 5,000 km (3,000 mi) to 40,000 km, plus annual checks (every 12 months unless the distance comes first). On reaching 40,000 km, repeat from the 5,000 km interval. Items marked (*) are fundamental for keeping emissions stable.

  • Inspect brake hoses; replace old rubber
    Brakes
    Guideline
  • Rebuild calipers and master cylinders (seals)
    Brakes
    Guideline

Every 6 years

1 item
  • Replace tires on age (regardless of tread)
    Wheels and tires
    Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.

Keep up with this schedule on your phone

Add the bike in the app and this chart loads itself, ready to log against and edit.

Coming soon to Google Play

Other 2019 Quadro models

All 2019 Quadro
2014-2019
3 (346 cc)
Factory
2018-2019
Qooder (399 cc)
Guideline