No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

Rieju · Overhead-cam four-stroke single, wet sump, separate gearbox oil, CVT belt drive

CityLine 300

Library entry covers 2015-2017

26 factory 47 guideline

Published source

Rieju City Line 125/300 Ie user manual, maintenance table 5.2 p.31 English (ManualsLib)

Factory owner's handbook. Covers Rieju City Line 125/300 Ie user manual (prints City Line 125/300 Ie), injection version; no model year printed.

73 items for a 2017 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, screw/locknut adjusters
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Liquid cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Separate gearbox oil
Clutch control: Automatic or semi-automatic
Final drive: Belt CVT, scooter automatic
Front suspension: Telescopic fork
Rear suspension: Swingarm, twin shocks
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

2017 Rieju CityLine 300

On the road: every 300 km

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

On the road: every 800 km

1 item

Check coolant level

Pre-ride / on the road

Guideline

Every 1,600 km or 6 months

1 item

Inspect tire tread, sidewalls and date codes

Wheels and tires

Guideline

Every 2,000 km

1 item

Brake pads, condition and wear (check)

Brakes

Factory

Factory: Maintenance table 5.2 (printed p.31, English), 125 / 300 cc injection version; columns first 1,000 km (620 mi), then every 5,000 km (3,100 mi) or 10 months to 80,000 km, with coupon services every 10,000 km (6,200 mi) or 20 months. Key: dot = check; circle = clean; square = adjust; triangle = replace. Dot at 1,000 km; printed "every 2,000 km (1,240 mi)".

Every 5,000 km or 10 months

3 items

Coolant level and density, manifold tightness (check)

Engine

Factory

Factory: Maintenance table 5.2 (printed p.31, English), 125 / 300 cc injection version; columns first 1,000 km (620 mi), then every 5,000 km (3,100 mi) or 10 months to 80,000 km, with coupon services every 10,000 km (6,200 mi) or 20 months. Key: dot = check; circle = clean; square = adjust; triangle = replace. Dot at 1,000 km and at every 5,000 km column; replace coolant every 2 years.
Engine oil level (check)

Engine

Factory

Factory: Maintenance table 5.2 (printed p.31, English), 125 / 300 cc injection version; columns first 1,000 km (620 mi), then every 5,000 km (3,100 mi) or 10 months to 80,000 km, with coupon services every 10,000 km (6,200 mi) or 20 months. Key: dot = check; circle = clean; square = adjust; triangle = replace. Dot at 5,000, 15,000, 25,000 km and so on between the replacements.
Electrical equipment, battery and charge level (check)

Ignition and electrics

Factory

Factory: Maintenance table 5.2 (printed p.31, English), 125 / 300 cc injection version; columns first 1,000 km (620 mi), then every 5,000 km (3,100 mi) or 10 months to 80,000 km, with coupon services every 10,000 km (6,200 mi) or 20 months. Key: dot = check; circle = clean; square = adjust; triangle = replace. Dot at 1,000 km and at every 5,000 km column.

Every 5,000 km or 12 months

8 items

Check throttle cable(s) free play and return

Fuel and air

Guideline
Adjust automatic / semi-automatic clutch

Primary and gearbox

Guideline
Check steering head bearing adjustment

Front end

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline
Check brake pads and discs

Brakes

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 6,500 km or 12 months

2 items

Inspect, clean and gap spark plugs

Engine

Guideline
Inspect CVT drive belt, rollers / sliders and clutch shoes

Final drive

Guideline

Typical scooter interval. Your owner's manual figure governs; check belt width against the service limit.

Every 8,000 km or 12 months

2 items

Change engine oil

Engine

Guideline

Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.
Replace oil filter

Engine

Guideline

Every 9,500 km or 12 months

7 items

Inspect coolant hoses and clamps

Engine

Guideline
Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 10,000 km or 20 months

13 items

Braking system fluid (replace)

Engine

Factory

Factory: Maintenance table 5.2 (printed p.31, English), 125 / 300 cc injection version; columns first 1,000 km (620 mi), then every 5,000 km (3,100 mi) or 10 months to 80,000 km, with coupon services every 10,000 km (6,200 mi) or 20 months. Key: dot = check; circle = clean; square = adjust; triangle = replace. Dot at 1,000 km; printed "every 20 months or 10,000 km (6,200 mi)".
Braking system pipes tightness and injection system (check)

Engine

Factory

Factory: Maintenance table 5.2 (printed p.31, English), 125 / 300 cc injection version; columns first 1,000 km (620 mi), then every 5,000 km (3,100 mi) or 10 months to 80,000 km, with coupon services every 10,000 km (6,200 mi) or 20 months. Key: dot = check; circle = clean; square = adjust; triangle = replace. Marked at the first 1,000 km service and at every coupon (every 10,000 km).
Engine oil and oil filter (replace)

Engine

Factory

Factory: Maintenance table 5.2 (printed p.31, English), 125 / 300 cc injection version; columns first 1,000 km (620 mi), then every 5,000 km (3,100 mi) or 10 months to 80,000 km, with coupon services every 10,000 km (6,200 mi) or 20 months. Key: dot = check; circle = clean; square = adjust; triangle = replace. Triangle at 1,000 km and at every coupon (every 10,000 km); dot (check) at the 5,000 km points in between.
Sliding pads and speed variator rollers (replace)

Engine

Factory

Factory: Maintenance table 5.2 (printed p.31, English), 125 / 300 cc injection version; columns first 1,000 km (620 mi), then every 5,000 km (3,100 mi) or 10 months to 80,000 km, with coupon services every 10,000 km (6,200 mi) or 20 months. Key: dot = check; circle = clean; square = adjust; triangle = replace. Triangle at every coupon from 10,000 km.
Air filter (clean)

Fuel and air

Factory

Factory: Maintenance table 5.2 (printed p.31, English), 125 / 300 cc injection version; columns first 1,000 km (620 mi), then every 5,000 km (3,100 mi) or 10 months to 80,000 km, with coupon services every 10,000 km (6,200 mi) or 20 months. Key: dot = check; circle = clean; square = adjust; triangle = replace. Circle at every coupon from 10,000 km.
Air filter in belt compartment (check)

Fuel and air

Factory

Factory: Maintenance table 5.2 (printed p.31, English), 125 / 300 cc injection version; columns first 1,000 km (620 mi), then every 5,000 km (3,100 mi) or 10 months to 80,000 km, with coupon services every 10,000 km (6,200 mi) or 20 months. Key: dot = check; circle = clean; square = adjust; triangle = replace. Marked at every coupon from 10,000 km.
Fork and shock absorbers, operation and tightness (check)

Front end

Factory

Factory: Maintenance table 5.2 (printed p.31, English), 125 / 300 cc injection version; columns first 1,000 km (620 mi), then every 5,000 km (3,100 mi) or 10 months to 80,000 km, with coupon services every 10,000 km (6,200 mi) or 20 months. Key: dot = check; circle = clean; square = adjust; triangle = replace. Marked at the first 1,000 km service and at every coupon (every 10,000 km).
Steering system operation and play (check, lubricate if necessary)

Front end

Factory

Factory: Maintenance table 5.2 (printed p.31, English), 125 / 300 cc injection version; columns first 1,000 km (620 mi), then every 5,000 km (3,100 mi) or 10 months to 80,000 km, with coupon services every 10,000 km (6,200 mi) or 20 months. Key: dot = check; circle = clean; square = adjust; triangle = replace. Marked at the first 1,000 km service and at every coupon (every 10,000 km).
Final check: tires, pressure, lighting, warning devices, switches, road test

Wheels and tires

Factory

Factory: Maintenance table 5.2 (printed p.31, English), 125 / 300 cc injection version; columns first 1,000 km (620 mi), then every 5,000 km (3,100 mi) or 10 months to 80,000 km, with coupon services every 10,000 km (6,200 mi) or 20 months. Key: dot = check; circle = clean; square = adjust; triangle = replace. Marked at the first 1,000 km service and at every coupon (every 10,000 km).
Tire pressure and tread wear (check)

Wheels and tires

Factory

Factory: Maintenance table 5.2 (printed p.31, English), 125 / 300 cc injection version; columns first 1,000 km (620 mi), then every 5,000 km (3,100 mi) or 10 months to 80,000 km, with coupon services every 10,000 km (6,200 mi) or 20 months. Key: dot = check; circle = clean; square = adjust; triangle = replace. Marked at the first 1,000 km service and at every coupon (every 10,000 km).
Wheel bearings (check)

Wheels and tires

Factory

Factory: Maintenance table 5.2 (printed p.31, English), 125 / 300 cc injection version; columns first 1,000 km (620 mi), then every 5,000 km (3,100 mi) or 10 months to 80,000 km, with coupon services every 10,000 km (6,200 mi) or 20 months. Key: dot = check; circle = clean; square = adjust; triangle = replace. Marked at the first 1,000 km service and at every coupon (every 10,000 km).
Chassis linkages or levers (check)

Controls and cables

Factory

Factory: Maintenance table 5.2 (printed p.31, English), 125 / 300 cc injection version; columns first 1,000 km (620 mi), then every 5,000 km (3,100 mi) or 10 months to 80,000 km, with coupon services every 10,000 km (6,200 mi) or 20 months. Key: dot = check; circle = clean; square = adjust; triangle = replace. Marked at the first 1,000 km service and at every coupon (every 10,000 km).
Throttle control (adjust)

Controls and cables

Factory

Factory: Maintenance table 5.2 (printed p.31, English), 125 / 300 cc injection version; columns first 1,000 km (620 mi), then every 5,000 km (3,100 mi) or 10 months to 80,000 km, with coupon services every 10,000 km (6,200 mi) or 20 months. Key: dot = check; circle = clean; square = adjust; triangle = replace. Square at 1,000 km and at every coupon (every 10,000 km).

Every 13,000 km or 2 years

1 item

Check and adjust valve clearances

Engine

Guideline

Every 15,000 km or 30 months

1 item

Drive belt (replace)

Engine

Factory

Factory: Maintenance table 5.2 (printed p.31, English), 125 / 300 cc injection version; columns first 1,000 km (620 mi), then every 5,000 km (3,100 mi) or 10 months to 80,000 km, with coupon services every 10,000 km (6,200 mi) or 20 months. Key: dot = check; circle = clean; square = adjust; triangle = replace. Triangle at 15,000, 30,000, 45,000, 60,000 and 75,000 km; dot (check) at 10,000, 25,000, 40,000, 55,000 and 70,000 km. If belts wear excessively between coupons, check more often.

Every 16,000 km or 2 years

2 items

Compression test (or leak-down)

Engine

Guideline
Change gearbox oil

Primary and gearbox

Guideline

Every 19,500 km or 2 years

3 items

Replace air filter element

Fuel and air

Guideline
Synchronize throttle bodies

Fuel and air

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 19,500 km or 3 years

1 item

Replace CVT drive belt

Final drive

Guideline

Typical scooter interval, or sooner if the belt is cracked, glazed or below its width limit.

Every 20,000 km or 40 months

6 items

Nuts and bolts, tightness (check)

Engine

Factory

Factory: Maintenance table 5.2 (printed p.31, English), 125 / 300 cc injection version; columns first 1,000 km (620 mi), then every 5,000 km (3,100 mi) or 10 months to 80,000 km, with coupon services every 10,000 km (6,200 mi) or 20 months. Key: dot = check; circle = clean; square = adjust; triangle = replace. Dot at 1,000 km and at 10,000, 30,000, 50,000 and 70,000 km.
Spark plug (replace)

Engine

Factory

Factory: Maintenance table 5.2 (printed p.31, English), 125 / 300 cc injection version; columns first 1,000 km (620 mi), then every 5,000 km (3,100 mi) or 10 months to 80,000 km, with coupon services every 10,000 km (6,200 mi) or 20 months. Key: dot = check; circle = clean; square = adjust; triangle = replace. Triangle at 20,000, 40,000, 60,000 and 80,000 km.
Valves (check)

Engine

Factory

Factory: Maintenance table 5.2 (printed p.31, English), 125 / 300 cc injection version; columns first 1,000 km (620 mi), then every 5,000 km (3,100 mi) or 10 months to 80,000 km, with coupon services every 10,000 km (6,200 mi) or 20 months. Key: dot = check; circle = clean; square = adjust; triangle = replace. Dot at 20,000, 40,000, 60,000 and 80,000 km.
Final transmission oil (replace)

Primary and gearbox

Factory

Factory: Maintenance table 5.2 (printed p.31, English), 125 / 300 cc injection version; columns first 1,000 km (620 mi), then every 5,000 km (3,100 mi) or 10 months to 80,000 km, with coupon services every 10,000 km (6,200 mi) or 20 months. Key: dot = check; circle = clean; square = adjust; triangle = replace. Triangle at 1,000 km and at 20,000, 40,000, 60,000 and 80,000 km; dot (check) at 10,000, 30,000, 50,000 and 70,000 km.
Side and center stands, tightness and pivot lubrication

Rear suspension and frame

Factory

Factory: Maintenance table 5.2 (printed p.31, English), 125 / 300 cc injection version; columns first 1,000 km (620 mi), then every 5,000 km (3,100 mi) or 10 months to 80,000 km, with coupon services every 10,000 km (6,200 mi) or 20 months. Key: dot = check; circle = clean; square = adjust; triangle = replace. Dot at 1,000 km and at 10,000, 30,000, 50,000 and 70,000 km.
Side stand switch operation and lubrication

Rear suspension and frame

Factory

Factory: Maintenance table 5.2 (printed p.31, English), 125 / 300 cc injection version; columns first 1,000 km (620 mi), then every 5,000 km (3,100 mi) or 10 months to 80,000 km, with coupon services every 10,000 km (6,200 mi) or 20 months. Key: dot = check; circle = clean; square = adjust; triangle = replace. Dot at 1,000 km and at 10,000, 30,000, 50,000 and 70,000 km.

Every 24,000 km or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 25,500 km or 4 years

1 item

Replace spark plugs

Engine

Guideline

Every 32,000 km or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 38,500 km or 4 years

1 item

Replace fuel filter

Fuel and air

Guideline

Every 40,000 km or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 48,500 km or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 50,000 km

1 item

Fuel pump filter (replace)

Fuel and air

Factory

Factory: Maintenance table 5.2 (printed p.31, English), 125 / 300 cc injection version; columns first 1,000 km (620 mi), then every 5,000 km (3,100 mi) or 10 months to 80,000 km, with coupon services every 10,000 km (6,200 mi) or 20 months. Key: dot = check; circle = clean; square = adjust; triangle = replace. Triangle at 50,000 km.

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

5 items

Coolant (replace)

Engine

Factory

Factory: Maintenance table 5.2 (printed p.31, English), 125 / 300 cc injection version; columns first 1,000 km (620 mi), then every 5,000 km (3,100 mi) or 10 months to 80,000 km, with coupon services every 10,000 km (6,200 mi) or 20 months. Key: dot = check; circle = clean; square = adjust; triangle = replace. Printed "replace every 2 years".
Replace coolant

Engine

Guideline
Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Replace brake fluid

Brakes

Guideline

Every 4 years

3 items

Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.